线阵影像GC3多视匹配模型的匹配方向线研究

针对线阵影像的几何成像特点,介绍了GC3及其改进匹配模型的匹配原理;根据模拟参数,推导了GC3多视匹配模型的同轨立体匹配方向线、异轨立体匹配方向线严密函数表达式,给出了匹配方向线分析结论;分别采用模拟数据与ADS40影像数据进行了实验分析,实验结果证明：在实际匹配过程中,匹配方向线在局部范围内可近似为直线使用。     

A two-step ionospheric modeling algorithm considering the impact of GLONASS pseudo-range inter-channel biases

The Global Navigation Satellite System presents a plausible and cost-effective way of computing the total electron content (TEC). But TEC estimated value could be seriously affected by the differential code biases (DCB) of frequency-dependent satellites and receivers. Unlike GPS and other satellite systems, GLONASS adopts a frequency-division multiplexing access mode to distinguish different satellites. This strategy leads to different wavelengths and inter-frequency biases (IFBs) for both pseudo-range and carrier phase observations, whose impacts are rarely considered in ionospheric modeling. We obtained observations from four groups of co-stations to analyze the characteristics of the GLONASS receiver P1P2 pseudo-range IFB with a double-difference method. The results showed that the GLONASS P1P2 pseudo-range IFB remained stable for a period of time and could catch up to several meters, which cannot be absorbed by the receiver DCB during ionospheric modeling. Given the characteristics of the GLONASS P1P2 pseudo-range IFB, we proposed a two-step ionosphere modeling method with the priori IFB information. The experimental analysis showed that the new algorithm can effectively eliminate the adverse effects on ionospheric model and hardware delay parameters estimation in different space environments. During high solar activity period, compared to the traditional GPS + GLONASS modeling algorithm, the absolute average deviation of TEC decreased from 2.17 to 2.07 TECu (TEC unit); simultaneously, the average RMS of GPS satellite DCB decreased from 0.225 to 0.219 ns, and the average deviation of GLONASS satellite DCB decreased from 0.253 to 0.113 ns with a great improvement in over 55%.     

地勘基金成果管理系统的设计与开发

本文在分析国内地质资料信息化服务现状的基础上,以地勘基金成果数据为管理对象,搭建了地勘基金成果管理系统,并以贵州省地勘基金成果数据为例,实现了该地区地勘基金项目、整装勘查项目地质数据的有效管理与查询,为地质资料的管理与应用提供了科学的决策支持.     

一种地形变化检测与DEM更新的方法研究

提出了一种使用旧时期的DEM和最新的航摄资料检测地形变化,同时更新DEM的方法。利用陕西省两个地区的数据对该方法进行了验证,结果表明变化检测和数据更新的精度比较理想。与现有的生产流程相比,该方法在效率方面有明显的优势,对原始数据的要求较低,最终的产品更加丰富,方法也更加稳健和自动化。     

图文综合办公系统的设计

本文通过分析图文综合办公自动化的需求和发展状况,结合规划管理的应用实践,总结了GIS与OA相结合技术在图文综合办公自动化领域应用的方法、模式,阐述了图文综合办公自动化系统的设计思想和技术集成方法,并举例说明系统的实际应用效果。     

Color correction of texture images for true photorealistic visualization

Photorealistic visualization combines 3-D geometric models with their texture images to render the virtual world. This paper points out that the texture images should be radiometrically corrected to achieve a true realistic appearance. Such a correction should include not only the color adjustment among images of the same object, but also the shade variation caused by the illumination change. The objective of this study is to correct the input texture images such that their shade varies when being rendered under different illumination directions. To achieve this goal we first apply the specular-to-diffuse mechanism based on the dichromatic reflection model to remove the specular component from the texture image. The resultant diffusion-only image then undergoes a shade correction to produce a normalized shade-free texture image. In the final step, shades under any illumination are produced to achieve a true photorealistic effect. Presented in the paper are the principles and methods for such corrections, along with a performance evaluation based on the graphic and numerical results for roof texture images.     

城市点云的区域生长三角网构建方法

成熟的倾斜摄影测量及密集匹配技术可获取密集的城市点云,对点云进行三角网构建是真三维建模的关键技术之一。提出了基于区域生长的三角网构建方法,使用双约束条件提高点云的搜索效率,基于点边表数据结构进行网格生长,利用夹角约束和三角形孔洞修补优化网格。实验证明,该方法获取的三角网能够准确地表达楼体、桥状建筑等在内的城市实体,网格优化后的孔洞比例约为1‰并且该方法具有一定的抗噪能力。     

多卫星系统融合精密单点定位性能分析

随着全球四大卫星导航系统格局的成型,卫星定位系统已从单系统模式发展为如今多系统、多频率融合定位、交互操作的模式。在分析多系统精密单点定位模型及各误差项处理策略的基础上,利用RTKLIB进行GPS,GLONASS,GALILEO,BDS多系统融合精密单点定位试验,并分析其动/静态定位性能。实验结果表明:在单系统空间几何构型较差的情况下,多系统融合精密单点定位较单GPS定位精度可提高20%~40%,收敛时间可缩短35%~50%;在截止高度角超过40°的情况下,单系统会因可见卫星数量不足而无法完成连续定位,而多系统仍能实现高精度的连续定位。这在城区、山区或卫星遮蔽较严重的不利环境中有重要的利用价值。     

ASTER GDEM V2的南极冰川高程误差校正及精度分析

ASTER GDEM V2是研究南极冰盖表面的一种重要DEM数据源。由于南极冰雪区反射率高且缺乏地形特征,导致ASTER GDEM V2存在大量的坑、隆起等噪声,难以直接用于南极地形分析。本文以ICESat/GLAS激光点高程数据作为参考,采用修正等高线法对南极伯德（Byrd）冰川ASTER GDEM V2进行了误差校正,并将其与ICESat-1 DEM的垂直精度进行了对比分析。结果表明：ASTER GDEM V2的RMSE由校正前的26.56 m下降到校正后的18.77 m,远低于ICESat-1 DEM的RMSE（121.24 m）;校正后的ASTER GDEM V2高程精度受坡度影响较小,不存在明显的系统误差,而ICESat-1 DEM的高程精度受坡度的影响较大。本研究进一步通过地形剖面分析得到：校正前的ASTER GDEM V2噪声主要分布于高程较低、地形平坦的区域,通过修正等高线的方法可以有效去除这些噪声,去除噪声后的ASTER GDEM V2可作为研究伯德冰川理想的DEM数据源。     

Mapping 3D visibility in an urban street environment from mobile LiDAR point clouds

ABSTRACT

Visibility determination is a key requirement in a wide range of national and urban applications, such as national security, landscape management, and urban design. Mobile LiDAR point clouds can depict the urban built environment with a high level of details and accuracy. However, few three-dimensional visibility approaches have been developed for the street-level point-cloud data. Accordingly, an approach based on mobile LiDAR point clouds has been developed to map the three-dimensional visibility at the street level. The method consists of five steps: voxelization of point-cloud data, construction of lines-of-sight, construction of sectors of sight, construction of three-dimensional visible space, and calculation of volume index. The proposed approach is able to automatically measure the volume of visible space and openness at any viewpoint along a street. This approach has been applied to three study areas. The results indicated that the proposed approach enables accurate simulation of visible space as well as high-resolution (1 m × 1 m) mapping of the visible volume index. The proposed approach can make a contribution to the improvement of urban planning and design processes that aim at developing more sustainable built environments.