国外招投标规则浅析

招投标作为当今国际贸易的主要方式越来越被人们所关注。本文从地理信息产业突破传统模式,与国际接轨开展更广泛的商务活动的角度,阐述国际市场的状况以及国外的地理信息产业工程项目招投标法规、行业规则及应用模式等。招投标规则的使用是顺应发展的必然需要,是以较高的合作水平进入国际市场,顺利深入开展国际间合作的必然趋势。     

工程勘察数据的传递控制与可视化

从广义说,工程勘察成果中的很大一部分是通过大量数据的传递与处理取得的。数据传递结构的优化和合理控制是提高勘察效率和质量的保证。讨论了用程序编制的方法实现的数据从平面图到剖面图的钻孔距离传递,利用模糊聚类思想提出的对剖面数据进行合并的建议和利用地质三维软件实现的三维地质体模型的耦合展示,这几个问题正是目前大多勘察单位在数据控制与传递流程中可能欠缺的环节。     

Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

第二次土地调查若干问题探讨

第二次土地调查的目的是全面查清全国土地利用状况,掌握真实的土地基础数据,如何保证调查的质量?文章以江阴市为例进行探讨。     

钻孔灌注桩施工对邻近运营隧道变形影响研究

桩基施工将引起周边地层位移和邻近隧道结构变形,以南京龙津桥改建项目桩基工程为背景,通过现场实测,分析研究钻孔灌注桩施工全过程各工况条件对地层位移场和邻近既有隧道结构变形的影响规律。结果表明:由于钢套管的护壁作用,钻孔灌注桩施工过程中产生的最大地层位移和隧道结构变形较小,说明采用“钢套管边旋压边取土”、“群桩间跳施工”等工艺,对周围土体扰动影响程度较小,建议近隧桩基工程采用全套管灌注桩的施工方法,监测分析结果可为类似工程提供技术参考。     

Compressibility and crystal structure of sillimanite, Al2SiO5, at high pressure

The unit-cell dimensions and crystal structure of sillimanite at various pressures up to 5.29 GPa have been refined from single-crystal X-ray diffraction data. As pressure increases, a and b decrease linearly, whereas c decreases nonlinearly with a slightly positive curvature. The axial compression ratios at room pressure are β_a:β_b:β_c=1.22:1.63:1.00. Sillimanite exhibits the least compressibility along c, but the least thermal expansivity along a (Skinner et al. 1961; Winter and Ghose 1979). The bulk modulus of sillimanite is 171(1) GPa with K′=4 (3), larger than that of andalusite (151 GPa), but smaller than that of kyanite (193 GPa). The bulk moduli of the [Al1O₆], [Al2O₄], and [SiO₄] polyhedra are 162(8), 269(33), and 367(89) GPa, respectively. Comparison of high-pressure data for Al₂SiO₅ polymorphs reveals that the [SiO₄] tetrahedra are the most rigid units in all these polymorphic structures, whereas the [AlO₆] octahedra are most compressible. Furthermore, [AlO₆] octahedral compressibilities decrease from kyanite to sillimanite, to andalusite, the same order as their bulk moduli, suggesting that [AlO₆] octahedra control the compression of the Al₂SiO₅ polymorphs. The compression of the [Al1O₆] octahedron in sillimanite is anisotropic with the longest Al1-OD bond shortening by ～1.9% between room pressure and 5.29 GPa and the shortest Al1-OB bond by only 0.3%. The compression anisotropy of sillimanite is primarily a consequence of its topological anisotropy, coupled with the compression anisotropy of the Al-O bonds within the [Al1O₆] octahedron.     

五大连池火山群新期火山渣丘成因的探讨

火山渣丘,是火山区内的一种特殊的地质现象,以前地其成因国内外尚无详细探讨和描述,有的学者曾经统称为副火山。笔者通过实地调查,对这一结论提出新的见解,认为火山渣丘的形成是一复杂的地质现象,其成因具有多元性。这对探讨火山喷发规律,对火山地质地貌的准确描述与具有积极作用。     

On matching the spectrum of Io: Variations in the photometric properties of sulfur-containing mixtures

The problem of comparing laboratory spectra of sulfur-containing binary mixtures with the spectrum of Io is discussed. For the satellite, the observable is the geometric albedo as a function of wavelength, whereas in the laboratory one often measures some other type of albedo. In a previous paper we demonstrated that for pure sulfur the multiplicative factor which converts the laboratory albedos to geometric albedos can be strongly wavelength dependent. The present paper demonstrates that this is also true for binary sulfur-containing mixtures. Furthermore, there is no universal conversion factor applicable to all binary mixtures, nor can the factor be interpolated for a particular mixture from the conversion factors of the two end members. The conversion factor is a function not only of the specific composition of a binary mixture, but of the relative particle size distributions of the two components, and must be measured specifically for each individual sample if a quantitative comparison between a laboratory sample and Io's surface is desired.