Stability study on the northern batter of MBC Open Pit using Plaxis 3D

Cracks appeared on the northern batter at Maddingley Brown Coal Open Pit Mine, Victoria, Australia, on 8 November 2013 and a 2-day rainfall event happened 5 days later. This study models the stability of the northern batter considering the effect of the rainfall event and an emergency buttress using finite element method (FEM) encoded in Plaxis 3D. It is found that the batter tended to lead to block sliding after overburden removal. The observed vertical crack would be a combined action of the overburden removal and groundwater flow. The simulated location of cracks agrees well with the actual location, and the simulated heave of the coal seam is in good agreement with the experience in Victoria brown coal open pit mining. The rainfall accelerated the development of the cracks. With the construction of the emergency buttress, the batter became stable that is in good agreement with the monitored data.     

Position-domain integrity risk-based ambiguity validation for the integer bootstrap estimator

Integrity monitoring for ambiguity resolution is of significance for utilizing the high-precision carrier phase differential positioning for safety–critical navigational applications. The integer bootstrap estimator can provide an analytical probability density function, which enables the precise evaluation of the integrity risk for ambiguity validation. In order to monitor the effect of unknown ambiguity bias on the integer bootstrap estimator, the position-domain integrity risk of the integer bootstrapped baseline is evaluated under the complete failure modes by using the worst-case protection principle. Furthermore, a partial ambiguity resolution method is developed in order to satisfy the predefined integrity risk requirement. Static and kinematic experiments are carried out to test the proposed method by comparing with the traditional ratio test method and the protection level-based method. The static experimental result has shown that the proposed method can achieve a significant global availability improvement by 51% at most. The kinematic result reveals that the proposed method obtains the best balance between the positioning accuracy and the continuity performance.     

A new multipath mitigation method based on adaptive thresholding wavelet denoising and double reference shift strategy

Multipath disturbance is one of the major error sources in high-accuracy positioning for global navigation satellite system (GNSS). Although various methods based on software and hardware strategies have been developed to mitigate this error, they are still limited by different kinds of factors and the effect is not ideal. After analyzing the existing methods, a new single-difference sidereal filtering method, based on adaptive thresholding wavelet denoising and double reference shift strategy (ATDR), is proposed to mitigate multipath effects for static short-baseline GNSS applications. The key idea of the proposed method is the use of both the adaptive thresholding wavelet denoising to extract an accurate multipath correction model from the reference Day and the double reference shift strategy to mitigate multipath for subsequent Day 2 more accurately and efficiently. By applying the introduced adaptive thresholding method, the average improvement rate of the RMS values of the single-difference residuals can reach about 15.82% compared with the constant thresholding method. Moreover, after applying the proposed ATDR method, the 3D positioning precision is improved by about 37.73% for the single epoch mode with 30 s data sampling rate and about 31.22% for the continuous mode with 1 s high sampling rate compared with the original results. Even compared with the constant thresholding single orbital reference (CTSR) method, the improvement percentage is about 33.94% in single epoch mode and about 25.40% in continuous mode for 3D positioning precision, respectively. In conclusion, the results of the two experiments indicate that the proposed ATDR method performs much better than the CTSR method in mitigating multipath for different sampling rates and different processing modes in the measurement domain for GNSS static short-baseline postprocessing applications.     

漠河盆地西部二十二站组碎屑锆石U-Pb年龄、地球化学特征及其物源意义

大兴安岭北部漠河盆地内广泛发育二十二站组,其形成时代及物质来源一直以来备受争议.本文在野外地质调查及岩相学的基础上,利用碎屑锆石LA-ICP-MS U-Pb法测年,并结合岩石地球化学等方法,探讨了二十二站组形成时代、物源区大地构造环境及沉积物来源.测年结果显示132个测点年龄主要分布在4个群落,分别为508.3～492.3 Ma;486.9～435.5 Ma;278.3～254.2 Ma;209.5～178.1 Ma.本次获得二十二站组最小碎屑锆石年龄为178.1 Ma,并结合漠河盆地东西部碎屑锆石的年龄,综合认为二十二站组形成时代应为中晚侏罗世.地球化学分析结果显示,二十二站组砂岩的稀土元素与活动大陆边缘的稀土元素曲线吻合较好,且相对亏损高场强元素(Nb和Ta)和大离子亲石元素(Ba和Sr),相对富集高场强元素(La、Th、Zr、Hf),地球化学特征与活动大陆边缘相似.综合古流向、源区母岩分析、碎屑锆石测年分析、微量元素特征等诸多因素,本次研究认为本区二十二站组砂岩的母岩主要来源于盆地南缘广泛分布的前中生代沉积-变质基底(兴华渡口岩群、佳疙瘩组、额尔古纳河组等)及各期中酸性火成岩.     

Study on Deformation Failure Mechanism and Control Technology of Surrounding Rock in Soft Rock Roadway

Geotechnical and Geological Engineering - In order to reveal the mechanism of surrounding rock deformation and instability of soft rock roadway in 12# working face of Puhe coal mine, and...     

大九湖泥炭沼泽源铁有机配合物的络合稳定性及其生态环境意义

为了研究泥炭沼泽源铁有机配合物的络合稳定性,利用pH电位滴定法和荧光淬灭滴定法测定了大九湖泥炭沼泽中不同分子量段的DOM和Fe2+、Fe3+的络合稳定常数.pH电位滴定法结果（4.0~6.1）和荧光淬灭滴定法（1.5~4.1）差异较大,这与高pH条件下OH被脱质子化及Fe2+的氧化有关.相对而言,pH滴定法更适用于探究不同分子量段DOM与铁的络合稳定性,荧光淬灭法不改变样品酸碱条件,更适于研究不同价态铁与DOM的络合稳定性.研究结果表明:DOM与Fe3+的络合稳定常数大于Fe2+,低分子量段（< 3 kDa）的DOM与Fe2+、Fe3+的络合稳定常数更大.泥炭沼泽源铁有机配合物具有较好的络合稳定性,分子量相对较小的DOM与铁的络合能力更强.即便Fe2+氧化为Fe3+,仍能与DOM络合并保持较强的稳定性,这有利于陆源溶解性铁向水生态系统的输出.沼泽源铁有机配合物的络合稳定性还会影响铁的生物可利用性.      

综论土壤呼吸各组分区分方法

研究土壤呼吸各个组分对土壤总呼吸的贡献是定量评价植物和土壤碳平衡及能量平衡的 重要基础。目前区分土壤有机质分解呼吸和根呼吸的方法主要有成分综合法、壕沟法、根分离法、 林隙法、根生物量外推法、同位素法, 区分纯根呼吸和根际微生物呼吸的方法有同位素稀释法、模 拟根际沉降物法、¹⁴CO₂ 动态法、根系分泌物洗涤法、δ¹³C 微生物量法及一些非同位素法的联合。 土壤呼吸各组分区分研究中, 区分纯根呼吸和根际微生物呼吸将是未来研究的一个重大课题, 区 分方法的改进、完善和创新, 不同区分方法间的比较研究将是未来研究的一个重要方向。     

2005年云南会泽、文山5.3级地震短临预报及再认识

2005年8月5日、8月13日云南会泽、文山分别发生5．3级地震。震前,前兆各学科出现不同程度的异常变化,异常台项达30多项,并呈现非线性上升趋势。据此,震前对这两次地震做出了短临预报。震后对两次地震的震前异常做了进一步分析研究,认为异常主要分布在距离震中20～180km范围内,集中出现在震前2个月。水温异常对发震地点有一定的指示意义。     

伽师强震群的深部动力学条件

根据天山造山带及其两侧的塔里木盆地和准噶尔盆地的岩石圈二维速度结构、二维密度结构、二维电性结构、壳幔过渡带的详细结构以及大地热流和震源深度的分布,再结合对新疆西北部的蛇绿岩带、高压变质带和岩浆岩分布的综合分析,建立了天山造山带的地球动力学“层间插入消减”模型。该模型认为,塔里木板块的中上地壳在库尔勒断裂附近向天山造山带的中下地壳层间插入;而下地壳连同岩石圈地幔向天山造山带的上地幔俯冲消减。在天山的西段（哈萨克斯坦境内）,费尔干纳地块由北向南插入到南天山之下约180km的深处,在其东段（中国境内）,塔里木盆地由南向北插入南天山之下。这两个具有不同方向的下降板片的接触部位为费尔干纳走滑断裂。我国的伽师、喀什、乌恰地震区均落在这两个具有不同俯冲方向板块的结合部位附近,有着特殊的深部构造背景。南、北两大板块的双向挤压必定产生强大的应力,在地震区附近,这种应力的积累与释放具有4个显著的特点：（1）板片的俯冲消减速度约高达每年22mm左右;（2）应力的积累与释放速率加快;（3）应力释放较容易;（4）应力释放较为集中。这4个特点可能是伽师地区在较短的时间内连续发生数次强震的构造因素。     

Mapping 3D visibility in an urban street environment from mobile LiDAR point clouds

ABSTRACT

Visibility determination is a key requirement in a wide range of national and urban applications, such as national security, landscape management, and urban design. Mobile LiDAR point clouds can depict the urban built environment with a high level of details and accuracy. However, few three-dimensional visibility approaches have been developed for the street-level point-cloud data. Accordingly, an approach based on mobile LiDAR point clouds has been developed to map the three-dimensional visibility at the street level. The method consists of five steps: voxelization of point-cloud data, construction of lines-of-sight, construction of sectors of sight, construction of three-dimensional visible space, and calculation of volume index. The proposed approach is able to automatically measure the volume of visible space and openness at any viewpoint along a street. This approach has been applied to three study areas. The results indicated that the proposed approach enables accurate simulation of visible space as well as high-resolution (1 m × 1 m) mapping of the visible volume index. The proposed approach can make a contribution to the improvement of urban planning and design processes that aim at developing more sustainable built environments.