Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

海上油井密封套管内海水冻胀特性试验分析

1998年首次进行了海上油井密封套管内海水冻胀特性模拟试验,建立了一套各种参数的测量系统.文中介绍了管内海水冻结过程、海水过冷温度、结冰水温、轴向冻胀力以及管体应变测量结果.     

Estimation of Rapidly Time-Varying Sparse Channels

The estimation of sparse shallow-water acoustic communication channels and the impact of estimation performance on the equalization of phase coherent communication signals are investigated. Given sufficiently wide transmission bandwidth, the impulse response of the shallow-water acoustic channel is often sparse as the multipath arrivals become resolvable. In the presence of significant surface waves, the multipath arrivals associated with surface scattering fluctuate rapidly over time, in the sense that the complex gain, the arrival time, and the Dopplers of each arrival all change dynamically. A sparse channel estimation technique is developed based on the delay-Doppler-spread function representation of the channel. The delay-Doppler-spread function may be considered as a first-order approximation to the rapidly time-varying channel in which each channel component is associated with Doppler shifts that are assumed constant over an averaging interval. The sparse structure of the delay-Doppler-spread function is then exploited by sequentially choosing the dominant components that minimize a least squares error. The advantage of this approach is that it captures both the channel structure as well as its dynamics without the need of explicit dynamic channel modeling. As the symbols are populated with the sample Dopplers, the increase in complexity depends on the channel Doppler spread and can be significant for a severely Doppler-spread channel. Comparison is made between nonsparse recursive least squares (RLS) channel estimation, sparse channel impulse response estimation, and estimation using the proposed approach. The results are demonstrated using experimental data. In training mode, the proposed approach shows a 3-dB reduction in signal prediction error. In decision-directed mode, it improves significantly the robustness of the performance of the channel-estimate-based equalizer against rapid channel fluctuations.     

Contamination of organotin compounds and imposex in molluscs from Vancouver,Canada

Gastropods and bivalves were collected at 15 sites at Vancouver and Victoria, Canada between 24 May and 7 June, 1999, to establish tissue concentrations of butyltin and phenyltin compounds, to record imposex symptoms in gastropods, and to assess the present status of organotin contamination around Vancouver. No neogastropods (such as Nucella lima) were found around Vancouver. Neogastropod populations could have been extirpated by severe TBT contamination in Vancouver, as relatively high concentrations of TBT were detected in tissues of Mytilus trossulus from Vancouver, and the neogastropods distributed in Vancouver might be sensitive to TBT. Recovery from imposex, however, was observed in neogastropod populations from three sites at Victoria and Mission Point. TBT contamination has continued around Vancouver, arising from continuous use of TBT in antifouling paints for vessels larger than 25 m in length; however, TBT has decreased around Victoria and Mission Point. Different patterns of TBT accumulation in tissue were observed among the bivalve species from Vancouver. The highest TBT concentration detected in Tresus capax suggested some possible adverse effects. TBT was the most predominant butyltin component in almost all bivalve specimens surveyed, suggesting a low rate of TBT metabolism. Phenyltin compounds were not detected in any molluscan specimens in this study.     

Underice Operation of SJT-5 ROV

- The authors have used a low-cost ROV of observation type for underice surveying of the Nen-Jiang Cross-river oil pipe line in the Da Qing oil field. The operation method, process and the safety measures for severe cold areas are presented. The fruitful tries and experience may be useful to ROV operators in severe cold areas.     

添加维生素B_（12）生产菌高密度培养褶皱臂尾轮虫的效果

阐述把维生素Ｂ１２生产菌添加到培养水中培养褶皱臂尾轮虫ＢｒａｃｈｉｏｎｕｓＰｌｉｃａｔｉｌｉｓ的买验。共１８株细菌分离于轮虫培养池，其中，有一株产维生素Ｂ１２的假单胞杆菌ＴＰ４对轮虫的生长繁殖有明显的促进作用。把ＴＰ４菌株培养后，加入到２Ｌ的烧杯和５００Ｌ的水槽中培养泰国Ｓ型轮虫时．在９ｄ（天）和６ｄ（天）中，轮虫密度从１２４～１３９和２４２～２８８个体／ｍｌ增殖到４，４１７～５，５４０和１，０１７～１，２５４个体／ｍｌ，分别比对照组增加了４～６及２～３倍。     

Pathogens and pathogenicity to Penaeus orientalis Kishinouye

ＰａｔｈｏｇｅｎｓａｎｄｐａｔｈｏｇｅｎｉｃｉｔｙｔｏＰｅｎａｅｕｓｏｒｉｅｎｔａｌｉｓＫｉｓｈｉｎｏｕｙｅＩＮＴＲＯＤＵＣＴＩＯＮＢａｃｔｅｒｉａ，ｅｓｐｅｃｉａｌｌｙｖｉｂｒｉｏｓａｒｅｏｎｅｏｆｔｈｅｍａｊｏｒｐａｔｈｏｇｅｎｓｔｏｃｕｌｔｕｒ...     

Refraction-Diffraction Mathematical Model for Waves With Lateral Energy Transmission Mechanism and Its Verification

To solve problems concerning wave elements and wave propagation, an effective way is the wave energy balance equation, which is widely applied in oceanography and ocean dynamics for its simple computation. The present papaer advances wave energy balance equations considering lateral energy transmission and energy loss as the governing equation for the study of wave refraction-diffraction. For the mathematical model, numerical simulation is made by means of difference method, and the result is verified with two examples.     

伶仃洋L＿2和L＿（16）孔第四纪有孔虫群与孢粉化石带特征及其地质意义

本文所依据的分析样品是取自珠江最大的一个河口湾伶仃洋中部的水下钻孔岩芯，其底部到达花岗岩基底。通过对第四纪有孔虫群与孢粉化石带特征的分析，阐明在相同的钻孔岩芯中，有孔虫分布变化所反映的古沉积环境特征与孢粉分析的古气候特征较为吻合，并与相应的沉积相对应，结合￣（１４）Ｃ和￣（２３０）Ｔｈ／￣（２３２）Ｔｈ比值法测年数据，从而较好地重塑本区晚更新世中期以来的地质历史。     

潜水员水下用电安全技术规范的编制与认识

本文介绍了国家标准《潜水员水下用电安全技术规范》的研究、编制过程，以及编者对该标准性质、适用范围、总体结构、电气安全数值取舍等的基本认识，并就该标准制定实施后的经济、社会效益进行了初步预测。