Studies on the determination of inorganic iodine in seawater

Existing methods for the determination of the various forms of iodine present in seawater are laborious or unwieldy in use. This paper describes modified forms of the iodate and total iodine methods described by Barkley and Thompson (1960), a spectrophotometric procedure for iodate determination derived from Johannesson's (1958) work, and an automatic method for total iodine determination. Procedures for iodate and total-iodine determination which are suitable for use aboard ship, are recommended. Both procedures for iodate determination returned a standard deviation close to 0.5 μg/l when several replicate samples of a seawater containing approximately 30 μg/l of iodate-iodine were analysed. The automatic method for total iodine determination yielded a standard deviation of 0.8 μg/l by the repeated analysis of a seawater containing a total of approximately 50 μg/l of iodine. Suitable methods for the filtration and storage of seawater are also described.     

A locking-compass for in situ sample orientation

A mechanically-actuated locking-compass was designed for mounting on corers to record equipment orientation during the sampling process, thereby providing magnetic orientation data on the recovered deep-sea core. Locking occurs upon impact by the corer with the sea-floor; after retrieval, the device is easily unlocked and reset for another station. Compass construction makes use of commercially available parts, requires no welding and little machining, and thus allows inexpensive and easy assembly at sea.     

Uptake of plutonium from seawater and sediment by a marine polychaete worm

The results of the uptake of plutonium 239 from sediment by a marine polychaete wormNereis diversicolor is reported in the present paper. A comparison is made of the relative importance of two possible uptake pathways, sediment and seawater by which this worm may obtain its plutonium body-burden. Under the laboratory conditions used for the comparison of those two routes it would appear thatNereis obtains greater than 98% of its body activity from seawater.     

Improved in situ gamma-ray transmission densitometer for marine sediments

The first-generation University of Illinois gamma-ray transmission densitometer, designed for the in situ measurement of sediment bulk density, was modified by incorporating in the detector probe (1) an Americium-241 alpha particle pulser and an anti-walk gain stabilization control to maintain better temperature stability and (2) a small power supply and a IC preamplifier to eliminate the need for a high-voltage coaxial cable between the detector and external signal conditioning electronics package. This second-generation Lehigh University system has been successfully deployed since 1971 in routine use from ships and submersibles in the Atlantic and Pacific Oceans and the Gulf of Mexico. Results are presented of system operations to (1) measure bulk density over the range of 1.2–1.8 Mg/m³ in the Hudson Canyon, (2) penetrate 1.9 m into the seafloor in the San Diego trough and, (3) be lowered to a water depth of 3.6 km in the Gulf of Mexico.     

Relationship between Shot-Induced Noise and Shot Interval in Seismic Refraction Experiments at Sea

Seismic noise induced by the seismic source during continuous profiling reduces the signal-to-noise ratio and hence the data quality. This noise is largely dependent on the shot interval. In this paper, the noise amplitude of refraction seismic records from a special experiment is analysed as a function of the shot interval. An empirical exponential relationship between mean peak noise amplitude and shot interval is deduced. By increasing the shot interval, the induced noise can be minimized on all successive records. This results in an improvement of the data, predominantly the signal-to-noise ratio. Because the seismic signal and the shot-induced noise have nearly the same spectra, the chance of improving the signal-to-noise ratio by stacking is significantly reduced.     

Submersible observations of an iceberg pit and scour on the Grand Banks of Newfoundland

An elongated sea bed depression (pit), 80 by 125 m and 10 m deep located on the Grand Banks of Newfoundland was identified on high resolution surficial geophysical survey lines and investigated using a manned submersible. The pit occurs at the termination of a long (greater than 3 km) iceberg scour, 1.5 m deep, and 80 m wide in 91 m of water. It is similar to other depressions in the region that indent the sea bed up to seven times deeper than the surrounding deepest iceberg furrows. The pit is interpreted to be the sea bed response to impact and loading by a rolling and grounding iceberg. The iceberg scour and pit appear to be of recent origin.     

Dynamic response of dolos armor units to drop test impact loads

Dolos concrete units have been used extensively throughout the world for the protection of shorelines and rubble structures. A three-dimensional finite element model is used to determine the states of dynamic stress in dolosse with varying dimensions and concrete properties. An analytical procedure is developed which accurately predicts the tensile stress in the shank and horizontal fluke of dolosse subject to drop test loading conditions Numerical examples are presented which illustrate the application of prediction and iso-stress equations.     

高糖化力根霉的分离及其制作“全曲清酒”的研究

采用直接分离法、稀释法和毛细管分离法等方法,从酒药和大曲中分离得到了几株高糖化力的根霉纯培养,并应用于“全曲清酒”的制作;用富含淀粉的甘薯为原料,可省略通常采用的复杂的“发酵”工艺过程,从而降低了成本,可在乡镇企业推广生产