断层模型约束反演在煤层横向预测中的应用研究

在精细断层解释的基础上,以地震层位为趋势面,通过对趋势面局部微调,使各层面的变化趋势和空间关系更加合理。通过网格精度和地层厚度有控制构建包含断层在内的精细构造框架模型,并根据波阻抗的差异特征,利用断层模型约束波阻抗反演实现煤层的横向预测。实例表明,基于断层模型约束反演技术的煤层横向预测方法,可精细描述煤层尖灭、变薄、分叉合并、厚度变化等赋煤形态,经实际钻井资料验证吻合较好。     

Identification of fracture development period and stress field analysis based on fracture fabrics in tectonic superposition areas

As a direct consequence of multiple periods of stress applied on areas with tectonic superposition, the multiple-periods fractures have complex abutting relationships, and the field study of fractures is usually restricted by outcrop conditions, such as section direction. Therefore, previous studies of superposed stress fields based on fractures have been generally performed in areas with proper observation conditions and clear abutting relationships. In contrast, in many other areas, the identification of fracture development period based on field observation is often infeasible. Compared to abutting relationships, fracture fabrics obtained from field measurement are not affected by the restriction of outcrops and consequently are more representative of the fractures. According to the analysis of fracture fabrics and fracture features, this paper has separated and extracted the superposed fracture sets and identified the fracture development period in the area without available abutting relationships. Taking the southern segment of the Longmen Mountain thrust belt as an example, fractures of two development periods are identified and timed in the tectonic superposition area between two adjacent fold belts. The analysis of stress direction in each period suggests that the structural boundaries, consisting of such pre-existing structures as faults and anticlines, could have induced directional rotation in the subsequent stress. An equivalent result was achieved using a finite element simulation of the stress field. Based on the stress analysis of the field sites and the stress field simulation, the stress variation in the tectonic superposition area is well modeled.     

Research on the inversion of elemental abundances from Chang’E-2 X-ray spectrometry data

The elemental abundances of lunar surface are the important clues to study the formation and evolution history of the Moon. In 2010, China＇s Chang＇E-2 （CE-2） lunar orbiter carried a set of X-ray spectrometer （XRS） to investigate the elemental abundances of the lunar surface. During CE-2＇s life span around the Moon, the XRS ex- perienced several events of solar flare. The X-ray solar monitor onboard recorded the spectra of solar X-rays at the same time. In this paper, we introduced the XRS instrument and data product. We analyzed the characteristics of the XRS data. Using the data obtained during an M solar flare event which had occurred on Feb. 16, 201 l, we derived the elemental abundances ofMg, A1, Si, Ca and Fe of the lunar surface in the Oceanus Procellarum. Finally, we dis- cussed the factors that influence the accuracy of the inversion.     

地理学史教学行动研究与教师专业成长--以“地球的形状”为例

地理学史具有独特的教育价值,是地理教学改革关注的重点议题之一,但其在实践中却存在“高价值低应用”的困境。本文以H教师的地理学史教学行动研究为例,呈现了地理学史教学的具体实践过程,探讨了地理学史教学对学生理解学科本质与培养其核心素养带来的效果,阐述了地理学史教学对教师专业成长带来的积极影响,旨在促进地理学史教学真正走进现实课堂。     

Vegetation-related dry deposition of global PM2.5 from satellite observations

Journal of Geographical Sciences - Vegetation plays an important role in the dry deposition of particles with significant spatial variability, but the magnitude remains unclear at the global scale....     

Numerical Simulation of the Rock SHPB Test with a Special Shape Striker Based on the Discrete Element Method

A split Hopkinson pressure bar (SHPB) system with a special shape striker has been suggested as the test method by the International Society for Rock Mechanics (ISRM) to determine the dynamic characteristics of rock materials. In order to further verify this testing technique and microscopically reveal the dynamic responses of specimens in SHPB tests, a numerical SHPB test system was established based on particle flow code (PFC). Numerical dynamic tests under different impact velocities were conducted. Investigation of the stresses at the ends of a specimen showed that the specimen could reach stress equilibrium after several wave reverberations, and this balance could be maintained well for a certain time period after the peak stress. In addition, analyses of the reflected waves showed that there was a clear relationship between the variation of the reflected wave and the stress equilibrium state in the specimen, and the turning point of the reflected wave corresponded well with the peak stress in the specimen. Furthermore, the reflected waves can be classified into three types according to their patterns. Under certain impact velocities, the specimen deforms at a constant strain rate during the whole loading process. Finally, the influence of the micro-strength ratio ( \({{\tau_{\text{c}} } \mathord{\left/ {\vphantom {{\tau_{\text{c}} } {\sigma_{\text{c}} }}} \right. \kern-0pt} {\sigma_{\text{c}} }}\) ) and distribution pattern on the dynamic increase factor (DIF) of the strength DIF were studied, and the lateral inertia confinement and heterogeneity were found to be two important factors causing the strain rate effect for rock materials.     

Dam deformation analysis based on BPNN merging models

Hydropower has made a significant contribution to the economic development of Vietnam, thus it is important to monitor the safety of hydropower dams for the good of the country and the people. In this paper, dam horizontal displacement is analyzed and then forecasted using three methods: the multi-regression model, the seasonal integrated auto-regressive moving average (SARIMA) model and the back-propagation neural network (BPNN) merging models. The monitoring data of the Hoa Binh Dam in Vietnam, including horizontal displacement, time, reservoir water level, and air temperature, are used for the experiments. The results indicate that all of these three methods can approximately describe the trend of dam deformation despite their different forecast accuracies. Hence, their short-term forecasts can provide valuable references for the dam safety.     

Experimental study of the movement of backfilling gangues for goaf in steeply inclined coal seams

For the coal mining with flexible shield supports which is used widely in the exploitation of steeply inclined coal seams, a method with which to backfill enough gangues efficiently in goaf is the key to meet the control requirements for the roof. In order to research the movement of gangues in goaf and the factors influencing backfilling effects, an experimental device for the movement of gangues for backfilling the goaf in steeply inclined coal seams was designed. The movement trajectory of gangues was monitored and was divided into three stages. Gangue movement characteristic under different engineering condition was studied, which showed that the backfilling rate of gangues in the goaf of steeply inclined coal seams is positively correlated to the dip angle of the coal seam and the mining thickness, while being negatively correlated to the grain size of the gangues and the deformation of the roof.     

HY-2卫星散射计热带气旋自动识别算法

对基于HY-2卫星散射计风矢量产品的热带气旋自动识别算法进行了研究。算法分为粗搜索与精搜索两部分。粗搜索利用热带气旋风场的风速与风向分布直方图特征确定搜索的阈值,快速剔除比较容易识别的非热带气旋区域。在此基础上,精搜索利用热带气旋风向的螺旋状分布特征,通过搜索目标区域内是否存在螺旋状流线的方法,确定目标区域的风向是否存在螺旋状流线特征,从而实现对热带气旋的准确自动识别。作为示例,将该方法应用到对HY-2散射计观测到的2012年6号强热带风暴"杜苏芮"的自动识别,结果表明,本文提出的算法可以从HY-2散射计风场数据中准确有效的自动识别出热带气旋。