Seismic response control using electromagnetic inertial mass dampers

This paper presents a new type of electromagnetic damper with rotating inertial mass that has been developed to control the vibrations of structures subjected to earthquakes. The electromagnetic inertial mass damper (EIMD) consists of a ball screw that converts axial oscillation of the rod end into rotational motion of the internal flywheel and an electric generator that is turned by the rotation of the inner rod. The EIMD is able to generate a large inertial force created by the rotating flywheel and a variable damping force developed by the electric generator. Device performance tests of reduced‐scale and full‐scale EIMDs were undertaken to verify the basic characteristics of the damper and the validity of the derived theoretical formulae. Shaking table tests of a three‐story structure with EIMDs and earthquake response analyses of a building with EIMDs were conducted to demonstrate the seismic response control performance of the EIMD. The EIMD is able to reduce story drifts as well as accelerations and surpasses conventional types of dampers in reducing acceleration responses. Copyright © 2013 John Wiley & Sons, Ltd.     

Electron density distribution of FeTiO<Subscript>3</Subscript> ilmenite under high pressure analyzed by MEM using single crystal diffraction intensities

Many of ilmenites ABO₃ compounds bearing transition elements have semiconductive, ferroelectric and antiferromagnetic properties. The high-pressure diffraction studies of FeTiO₃ have been conducted up to 8.2 GPa using synchrotron radiation in KEK at Tsukuba with diamond anvil cell. The compression mechanism of FeTiO₃ ilmenite has been investigated by the structure refinements converged to the reliable factors R = 0.05. The deformations of the FeO₆ and TiO₆ octahedra were reduced with increasing pressure. In order to elucidate the electric conductivity change with pressure, electron density distribution of ilmenite have been executed by maximum entropy method (MEM) using single-crystal diffraction intensity data. MEM based on F _obs(hkl) of FeTiO₃ clearly shows electron density in comparison with the difference Fourier synthesis based on F _obs(hkl) − F _calc(hkl). The radial distribution of the electron density indicates electron localization around the cation positions. The bonding electron density found in bond Fe–O and Ti–O is lowered with pressure. The isotropic temperature factors B _iso become smaller with increasing pressure. Nevertheless the thermal vibration is considerably restrained by the compression, the electric conductivity is enhanced with pressure. Neither charge transfer nor electron hopping between Fe and Ti along the c axis in FeTiO₃ is plausible under high pressure. But the electric conductivity due to electron super-exchange in Fe–Fe and Ti–Ti has been clarified by the MEM electron density distribution. The anisotropy in the electric conductivity has been clarified.     

Rapid decrease of mass balance observed in the Xiao (Lesser) Dongkemadi Glacier,in the central Tibetan Plateau

The mass balance of the Xiao (Lesser) Dongkemadi Glacier located in the Tanggula Mountains, of the central Qinghai‐Tibetan Plateau has been monitored since 1989. The results show that the mass balance of the glacier has recently shown a deficit trend, and that the glacial terminus was also retreating. Positive mass balance of the glacier was dominant during the period 1989–1993, and the accumulated mass balance reached 970 mm. However, negative mass balance of the glacier has occurred since 1994, except for the large positive mass balance year 1997. The mass balance was ? 701 mm in 1998, an extremely negative glacier mass balance year. The equilibrium line altitude showed a significant increasing trend. The mass balance of the glacier has changed from a significantly positive mass balance to a strongly negative mass balance since 1994. Meteorological data suggest that the rapid decrease in the mass balance is related to summer season warming. Copyright © 2007 John Wiley & Sons, Ltd.     

Laumontization and Secondary Pores of Sandstones in the Paleogene and Upper Cretaceous Coal Measures, off Northeast Honshu, Japan

Abstract. Sandstones with high reservoir quality occur in the Paleogene and Upper Cretaceous coal measures off Sanriku and Sohma in the Pacific coast of northeast Honshu. The sandstone porosity was generally produced by the dissolution of calcite cement and clastic grains such as feldspar and glassy volcanics. The most probable cause of dissolution is the organic acids generated from the maturation of coal and coaly matter in the deeply subsiding source area prior to thermogenic hydrocarbon generation. The pore fluid including organic acids dissolved calcite and clastic silicates to form a small amount of laumontite and kaolinite at around 60C. The acidic and not neutralized pore fluid was responsible for the formation of kaoli-nite. On the other hand, laumontite was formed when the acidic pore fluid was neutralized and then made alkaline after the reaction with minerals such as plagioclase, glassy volcanics and calcite cement. Therefore, laumontite and kaolinite generally occur separately. Laumontite is 0.6–4.6 % by volume, whereas kaolinite is 0.6–9.8 % and the sandstone porosity remains from 10 to 22 %. This type of laumontization after the secondary pore formation might not give a severe damage to the reservoir property of the Paleogene and Upper Cretaceous coal measures in the Pacific coast of northeast Honshu and indicates further exploration possibility.     

Paleomagnetism of the middle Cretaceous Iritono granite in the Abukuma region, northeast Japan

We have studied the paleomagnetism of the middle Cretaceous Iritono granite of the Abukuma massif in northeast Japan together with ⁴⁰Ar–³⁹Ar dating. Paleomagnetic samples were collected from ten sites of the Iritono granite (102 Ma ⁴⁰Ar–³⁹Ar age) and two sites of its associated gabbroic dikes. The samples were carefully subjected to alternating field and thermal demagnetizations and to rock magnetic analyses. Most of natural remanent magnetizations show mixtures of two components: (1) H component, high coercivity (B_c > 50–90 mT) or high blocking temperature (T_b > 350–560 °C) component and (2) L component, relatively low B_c or low T_b component. H component was obtained from all the 12 sites to give a mean direction of shallow inclination and northwesterly declination (I = 29.9°, D = 311.0°, α₉₅ = 2.7°, N = 12). This direction is different from the geocentric axial dipole field at the present latitude (I = 56.5°) and the typical direction of the Cenozoic remagnetization in northeast Japan. Since rock magnetic properties indicate that the H component of the Iritono granite is carried mainly by magnetite inclusions in plagioclase, this component probably retains a primary one. Thus the shallow inclination indicates that the Abukuma massif was located at a low latitude (16.1 ± 1.6°N) about 100 Ma and then drifted northward by about 20° in latitude. The northwesterly deflection is attributed mostly to the counterclockwise rotation of northeast Japan due to Miocene opening of the Japan Sea. According to this model, the low-pressure and high-temperature (low-P/high-T) metamorphism of the Abukuma massif, which has been well known as a typical location, would have not occurred in the present location. On the other hand, the L component is carried mainly by pyrrhotite and its mean direction shows a moderate inclination and a northwesterly declination (I = 42.8°, D = 311.5°, α₉₅ = 3.3°, N = 9). Since this direction is intermediate between the H component and early Cenozoic remagnetization in northeast Japan, some thermal event would have occurred at lower temperature than pyrrhotite Curie point ( 320 °C) during the middle Cretaceous to early Cenozoic time to have resulted in partial remagnetization.     

Optimal placement of sensors on buildings subjected to intermediate‐storey excitation according to QN control method

An algorithm to calculate direct velocity feedback gain with limited number of sensors is developed in a simple way such that a certain performance index is minimized according to QN control method. If a limited number of velocity outputs can be measured, full velocity responses of the whole structure can be interpolated based on the mode shapes. By defining the performance index function as a combination of the structure's velocity responses and control forces only, feedback gain can be determined according to QN control method with the external excitation being taken into account throughout the entire algorithm. Control forces are then regulated by the time‐invariant feedback gain matrix. The effective location of the active control devices for a building structure subjected to intermediate‐storey excitation has been determined to be in the three floors adjacent to the vibration source. Hence for the purpose of this paper, only the optimal placement of sensors is verified. It is shown in this paper that if the dynamic behaviour of the structure is well described by a mathematical model, sufficient response reduction effect can be achieved according to the new DVFC algorithm, and the degradation of control performance due to time delay can also be verified. Copyright © 2001 John Wiley & Sons, Ltd.     

Potential of Oil Palm Trunk Sap as a Novel Inexpensive Renewable Carbon Feedstock for Polyhydroxyalkanoate Biosynthesis and as a Bacterial Growth Medium

Utilization of cheap renewable carbon feedstock for polyhydroxyalkanoate (PHA) production not only brings down its production cost but also ensures sustainability. The scope of this study was to evaluate the potential of sap extracted from felled oil palm trunk (OPT) as a novel inexpensive renewable carbon source for PHA production. OPT sap was found to be nutritionally rich and contained various fermentable sugars (5.5% w/v) as its major constituent. Termite gut isolate, Bacillus megaterium MC1 grew profoundly in mineral medium with OPT sap as carbon source and a cell density of 10.9 g/L was attained after 16 h of cultivation in shake flask cultures. A maximum poly‐3‐hydroxybutyrate [P(3HB)] content (% cell dry weight; CDW) of 30 wt% and a P(3HB) concentration of 3.28 g/L was recorded. Additionally, OPT sap extracted from younger tree trunks with prolonged storage had higher sugar content (10.8% w/v) and, when used as a growth medium without the addition of any nutrients, supported bacterial growth comparable to commercially available media.     

Geology of the summit limestone of Mount Qomolangma (Everest) and cooling history of the Yellow Band under the Qomolangma detachment

Abstract   Newly discovered peloidal limestone from the summit of Mount Qomolangma (Mount Everest) contains skeletal fragments of trilobites, ostracods and crinoids. They are small pebble-sized debris interbedded in micritic bedded limestone of the Qomolangma Formation, and are interpreted to have been derived from a bank margin and redeposited in peri-platform environments. An exposure of the Qomolangma detachment at the base of the first step (8520 m), on the northern slope of Mount Qomolangma was also found. Non-metamorphosed, strongly fractured Ordovician limestone is separated from underlying metamorphosed Yellow Band by a sharp fault with a breccia zone. The ⁴⁰Ar–³⁹Ar ages of muscovite from the Yellow Band show two-phase metamorphic events of approximately 33.3 and 24.5 Ma. The older age represents the peak of a Barrovian-type Eo-Himalayan metamorphic event and the younger age records a decompressional high-temperature Neo-Himalayan metamorphic event. A muscovite whole-rock ⁸⁷Rb–⁸⁶Sr isochron of the Yellow Band yielded 40.06 ± 0.81 Ma, which suggests a Pre-Himalayan metamorphism, probably caused by tectonic stacking of the Tibetan Tethys sediments in the leading margin of the Indian subcontinent. Zircon and apatite grains, separated from the Yellow Band, gave pooled fission-track ages of 14.4 ± 0.9 and 14.4 ± 1.4 Ma, respectively. These new chronologic data indicate rapid cooling of the hanging wall of the Qomolangma detachment from approximately 350°C to 130°C during a short period (15.5–14.4 Ma).     

Determination of Uranium in Thirty-six Geological Reference Samples by Fluorimetry and Extractive Spectrophotometry

The uranium contents of 36 geological reference samples have been determined by fluorimetry after ion-exchange separation, and spectrophotometry using Arsenazo III after solvent extraction with tri-n-octylphosphine oxide. The agreement between present results and published data is generally good. The methods of fluorimetry and spectrophotometry proved very convenient in the determination of uranium in geological materials.     

Water wedge advancing along the interface between two homogeneous layers

The behavior of the water wedge advancing along the interface between two homogeneous layers is investigated experimentally. The horizontally intruding wedge is strongly influenced by the detailed structure of the interface, even when the interface is sharp enough for its position to be visually determined. Within our experimental range, the intrusion velocity is very slow and depends on the thickness of the interface along which the water wedge intrudes. The wedge length is well described by the relation which is derived using an analogy to the linearly stratified case. The results could be useful for understanding the generation mechanism of the oceanic microstructure.