Implementation of integrated multi-channel analysis of surface waves and waveform inversion techniques for seismic hazard estimation

In this study, an integrated multi-channel analysis of Surface Waves (MASW) technique is applied to explore the geotechnical parameters of subsurface layers at the Zafarana wind farm. Moreover, a seismic hazard procedure based on the extended deterministic technique is used to estimate the seismic hazard load for the investigated area. The study area includes many active fault systems along the Gulf of Suez that cause many moderate and large earthquakes. Overall, the seismic activity of the area has recently become better understood following the use of new waveform inversion method and software to develop accurate focal mechanism solutions for recent recorded earthquakes around the studied area. These earthquakes resulted in major stress-drops in the Eastern desert and the Gulf of Suez area. These findings have helped to reshape the understanding of the seismotectonic environment of the Gulf of Suez area, which is a perplexing tectonic domain. Based on the collected new information and data, this study uses an extended deterministic approach to re-examine the seismic hazard for the Gulf of Suez region, particularly the wind turbine towers at Zafarana Wind Farm and its vicinity. Alternate seismic source and magnitude-frequency relationships were combined with various indigenous attenuation relationships, adapted within a logic tree formulation, to quantify and project the regional exposure on a set of hazard maps. We select two desired exceedance probabilities (10 and 20 %) that any of the applied scenarios may exceed the largest median ground acceleration. The ground motion was calculated at 50th, 84th percentile levels for both selected probabilities of exceeding the median.     

The Cretaceous Ofuku Pluton and Its Relation to Mineralization in the Western Akiyoshi Plateau,Yamaguchi Prefecture,Japan

The relationship between the magmatism of the Cretaceous Ofuku pluton and mineralization in and around the Akiyoshi Plateau, Yamaguchi Prefecture, Japan was investigated using a combination of field observation, petrographic and geochemical analyses, K–Ar geochronology, and fluid inclusion data. The Ofuku pluton has a surface area of 1.5 × 1.0 km, and was intruded into the Paleozoic accretionary complexes of the Akiyoshi Limestone, Ota Group and Tsunemori Formation in the western part of the Akiyoshi Plateau. The pluton belongs to the ilmenite‐series and is zoned, consisting mainly of early tonalite and granodiorite that share a gradational contact, and later granite and aplite that intruded the tonalite and granodiorite. Harker diagrams show that the Ofuku pluton has intermediate to silicic compositions ranging from 60.4 to 77.9 wt.% SiO₂, but a compositional gap exists between 70.5 to 73.4 wt.% SiO₂ (anhydrous basis). Modal and chemical variations indicate that the assumed parental magma is tonalitic. Quantitative models of fractional crystallization based on mass balance calculations and the Rayleigh fractionation model using major and trace element data for all crystalline phases indicate that magmatic fractionation was controlled mainly by crystal fractionation of plagioclase, hornblende, clinopyroxene and orthopyroxene at the early stage, and quartz, plagioclase, biotite, hornblende, apatite, ilmenite and zircon at the later stage. The residual melt extracted from the granodiorite mush was subsequently intruded into the northern and western parts of the Ofuku pluton as melt lens to form the granite and aplite. The age of the pluton was estimated at 99–97 Ma and 101–98 Ma based on K–Ar dating of hornblende and biotite, respectively. Both ages are consistent within analytical error, indicating that the Ofuku pluton and the associated Yamato mine belong to the Tungsten Province of the San‐yo Belt, which is genetically related to the ilmenite‐series granitoids of the Kanmon to Shunan stages. The aplite contains Cl‐rich apatite and REE‐rich monazite‐(Ce), allanite‐(Ce), xenotime and bastnäsite‐(Ce), indicating that the residual melt was rich in halogens and REEs. The tonalite–granodiorite of the Ofuku pluton contains many three‐phase fluid inclusions, along with daughter minerals such as NaCl and KCl, and vapor/liquid (V/L) volume ratios range from 0.2 to 0.9, suggesting that the fluid was boiling. In contrast, the granite and aplite contain low salinity two‐phase inclusions with low V/L ratios. The granodiorite occupies a large part of the pluton, and the inclusions with various V/L ratios with chloride daughter minerals suggest the boiling fluids might be related to the mineralization. This fluid could have carried base metals such as Cu and Zn, forming Cu ore deposits in and around the Ofuku pluton. The occurrence and composition of fluid inclusions in the igneous rocks from the Akiyoshi Plateau are directly linked to Cu mineralization in the area, demonstrating that fluid inclusions are useful indicators of mineralization.     

Unquenchable high-pressure perovskite polymorphs of MnSnO3 and FeTiO3

New high-pressure orthorhombic (GdFeO₃-type) perovskite polymorphs of MnSnO₃ and FeTiO₃ have been observed using in situ powder X-ray diffraction in a diamond-anvil cell with synchrotron radiation. The materials are produced by the compression of the lithium niobate polymorphs of MnSnO₃ and FeTiO₃ at room temperature. The lithium niobate to perovskite transition occurs reversibly at 7 GPa in MnSnO₃, with a volume change of -1.5%, and at 16 GPa in FeTiO₃, with a volume change of -2.8%. Both transitions show hysteresis at room temperature. For MnSnO₃ perovskite at 7.35 (8) GPa, the orthorhombic cell parameters are a=5.301 (2) A, b=5.445 (2) Å, c=7.690 (8) Å and V= 221.99 (15) ų. Volume compression data were collected between 7 and 20 GPa. The bulk modulus calculated from the compression data is 257 (18) GPa in this pressure region. For FeTiO₃ perovskite at 18.0 (5) GPa, cell parameters are a=5.022 (6) Å, b=5.169 (5) Å, c=7.239 (9) Å and V= 187.94 (36) ų. Based on published data on the quench phases, the FeTiO₃ perovskite breaks down to a rocksalt + baddelyite mixture of FeO and TiO₂ at 23 GPa. This is the first experimental verification of the pressure-induced breakdown of a perovskite to simple oxides.     

Evidence for erosion and deposition by the 2011 Tohoku-oki tsunami on the nearshore shelf of Sendai Bay,Japan

Ongoing geological research into processes operating on the nearshore continental shelf and beyond is vital to our understanding of modern tsunami-generated sediment transport and deposition. This paper investigates the southern part of Sendai Bay, Japan, by means of high-resolution seismic surveys, vibracoring, bathymetric data assimilation, and radioisotope analysis of a core. For the first time, it was possible to identify an erosional surface in the shallow subsurface, formed by both seafloor erosion and associated offshore-directed sediment transport caused by the 2011 Tohoku-oki tsunami. The area of erosion and deposition extends at least 1,100 m offshore from the shoreline down to water depths of 16.7 m. The tsunami-generated sedimentological signature reaches up to 1.2 m below the present seafloor, whereas bathymetric changes due to storm-related reworking over a period of 3 years following the tsunami event have been limited to the upper ~0.3 m, despite the fact that the study area is located on an open shelf facing the Pacific Ocean. Tsunami-generated erosion surfaces may thus be preserved for extended periods of time, and may even enter the rock record, because the depth of tsunami erosion can exceed the depth of storm erosion. This finding is also important for interpretation of modern submarine strata, since erosion surfaces in shallow (depths less than ~1 m) seismic records from open coast shelves have generally been interpreted as storm-generated surfaces or transgressive ravinement surfaces.     

Pixel-based and object-based classifications using high- and medium-spatial-resolution imageries in the urban and suburban landscapes

With the increasing availability of high-spatial-resolution remote sensing imageries and with the observed limitations of pixel-based techniques, the development and testing of geographic object-based image analysis (GEOBIA) techniques for image classification have become one of the main research areas in geospatial science. This paper examines and compares the classification performance of a pixel-based method and an object-based method as applied to high- (QuickBird satellite image) and medium- (Landsat TM image) spatial-resolution imageries in the context of urban and suburban landscapes. For the pixel-based classification, the maximum-likelihood supervised classification approach was employed. And for the object-based classification, the pixel-based classified maps were integrated with a set of image segments produced using various calibrations. The results show evidence that the object-based method can produce classifications that are more accurate for both high- and medium-spatial- resolution imageries in the context of urban and suburban landscapes.     

Recovery of surface albedo and plant cover after wildfire in a Picea mariana forest in interior Alaska

Albedo influences vegetation structure, permafrost thawing, etc., in particular, after wildfires in Picea mariana forests in Alaska, USA, while albedo changes with plant succession. To understand interactions between albedo and ecosystem recovery after wildfire, surface albedo was measured in the spring and summer of 2005 at Poker Flat, interior Alaska, where P. mariana forest was dominant. The ground surface was mostly covered with Sphagnum moss before the 2004 wildfire, and was variously burned by the fire. The measured wavelengths ranged from 0.3 to 3.0 μm. We measured four independent variables, incidence, plant cover on the forest floor, cover of burned ground surface, canopy openness and incidence, to examine the determinants on surface albedo. Multiple regression analysis showed that total plant cover positively and mostly determines albedo, indicating that plant recovery is prerequisite to return high albedo. When the ground surface was damaged by fire, changes in albedo were mostly derived from decrease in reflectance wavelengths between 0.7 and 1.4 μm. The fluctuations of reflectance wavelengths did not differ greatly between damaged-moss and burned surfaces. We must mention the dynamics of Sphagnum to understand various environmental changes including surface albedo.     

Nitrogen as the carrier gas for helium emission along an active fault in NW Taiwan

Variations of He gas concentration are widely applied in studies devoted to the location of faults and to monitor seismic activities. Up to now, its migration mechanism in soil is not fully understood. A systematic soil gas survey across an active fault in NW Taiwan provides the opportunity to closely examine the mechanism of He migration in the fault zone. Significant spatial and temporal correlations observed between soil N₂ and He gas support the hypothesis that N₂ is the probable carrier gas for He emission in the studied area. Based on N₂/Ar ratios and N₂ isotopic results, the excess soil N₂ in this study is considered to be largely derived from ancient atmospheric air which was dissolved in groundwater. Furthermore, observations rule out the possibility of CO₂ being the dominant carrier gas for He in the studied area based on the C and He isotopic compositions and the relationship between concentrations of these gases. At least two soil gas sources, A and B, can be identified in the studied area. Source A is an abiogenic gas source characterized by excess N₂ and He, and very low O₂ and CO₂ content. Source B, on the other hand, is a mixture of biogenic gas and atmospheric air. The development of the fault system is an important factor affecting the degree of mixture between sources A and B. Therefore, variations of soil gas composition, in particular those derived from source A, could be a useful proxy for tracing faults in the area.     

Atmospheric helium isotope ratio: Possible temporal and spatial variations

The atmospheric ³He/⁴He ratio has been considered to be constant on a global scale, because the residence time of helium is significantly longer than the mixing time in the atmosphere. However, this ratio may be decreasing with time owing to the anthropogenic release of crustal helium from oil and natural gas wells, although this observation has been disputed. Here, we present the ³He/⁴He ratios of old air trapped in historical slags in Japan and of modern surface air samples collected at various sites around the world, measured with a newly developed analytical system. In air helium extracted from metallurgical slag found at refineries in operation between AD 1603 and 1907 in Japan, we determined a mean ³He/⁴He ratio of (5106 ± 108) × 10^-5 R_HESJ (where R_HESJ is the ³He/⁴He ratio of the Helium Standard of Japan), which is consistent with the previously reported value of (5077 ± 59) × 10^-5 R_HESJ for historical slags in France and United Arab Emirates and about 4% higher than that of average modern air, (4901 ± 4) × 10^-5 R_HESJ. This result implies that the air ³He/⁴He ratio has decreased with time as expected by anthropogenic causes. Our modern surface air samples revealed that the ³He/⁴He ratio increases from north to south at a rate of (0.16 ± 0.08) × 10^-5 R_HESJ/degree of latitude, suggesting that the low ³He/⁴He ratio originates in high-latitude regions of the northern hemisphere, which is consistent with the fact that most fossil fuel is extracted and consumed in the northern hemisphere.