Spatial representation in the social interaction potential metric: an analysis of scale and parameter sensitivity

The social interaction potential (SIP) metric measures urban structural constraints on social interaction opportunities of a metropolitan region based on the time geographic concept of joint accessibility. Previous implementations of the metric used an interaction surface based on census tracts and the locations of their centroids. This has been shown to be a shortcoming, as the metric strongly depends on the scale of the zoning system in the region, making it difficult to compare the SIP metric between metropolitan regions. This research explores the role of spatial representation in the SIP metric and identifies a suitable grid-based representation that allows for comparison between regions while retaining cost-effectiveness with respect to computational burden. We also report on findings from an extensive sensitivity analysis investigating the SIP metric’s input parameters such as a travel flow congestion factor and the length of the allowable time budget for social activities. The results provide new insights on the role of the modifiable areal unit problem in the computation of time geographic measures of accessibility.     

Recursive algorithm for fast GNSS orbit fitting

Gaussian elimination is an efficient and numerically stable algorithm for estimating parameters and their precision. However, before estimating the parameters, it is often prudent to perform statistical tests to achieve the best fitting model. We use Gaussian elimination to select the best fitting model among candidate models. A succinct relationship between the weighted sum of squared residuals and the previous one is revealed by a volume formula. For quick parameter estimation and determination of weighted sum of squared residuals, a recursive elimination algorithm is proposed in the context of Gaussian elimination. In order to improve the model selection efficiency, the parameter estimation and the determination of the weighted sum of squared residuals are carried out in parallel using the proposed recursive elimination algorithm in which the improvement at each recursive stage is judged by the Bayesian information criterion. Ultimately, the computational complexity and numerical stability of the recursive elimination proposed are briefly discussed, and a GNSS orbit interpolation example is used to verify the results. It shows that the proposed recursive elimination algorithm inherits the numerical stability of the Gaussian elimination, and this algorithm can be used to examine the gain from the newly introduced parameter, dynamically assess the fitting model, and fix the optimal model efficiently. The optimal fitting model with the lowest information is very close to the real situation verified by checkpoints.     

Risk Prediction of Tunnel Water or Mud Inrush Based on Disaster Forewarning Grading

Water or mud inrush can not only hamper the normal construction of tunnel, but also cause severe casualties and property losses. Through the cause analysis and statistical theory, a total of 9 predictors based on 3 factors, the engineering geology, hydrogeology and construction, were put forward to control the happening of water or mud inrush. Based on the classification principles of forewarning, 3 alert levels, red, orange and yellow, were established. Using the AHP–TOPSIS evaluation theory, the risk prediction model of water or mud inrush was built based on the classification of disaster forewarning. The model was used in the diversion project of Fujian Long Jin–xi and achieved good effects.     

Experimental Evaluation of Construction Waste and Ground Granulated Blast Furnace Slag as Alternative Soil Stabilisers

In this study, the effect of ground granulated blast furnace slag (GGBFS) and recycled construction waste (CW) on bentonite clay stabilisation were investigated. The unconfined compressive strength (UCS) of specimens was evaluated with different combinations of GGBFS and CW over various curing periods. A series of micro analysis tests consisting of scanning electron microscope, energy dispersive spectrometer and X-ray diffraction were also conducted to determine the microstructural arrangement and mineralogical effect of the stabilisation treatment. The UCS results showed an increment in strength after introduction of GGBFS and CW and the longer curing period produced more pronounced results. The optimum additive ratio was calculated as 5 % of slag and 20 % of construction waste under all curing conditions. The micro analytical results also indicated formation of structural bonds between admixtures and bentonite in stabilised specimens, as slag crystals and bentonite particles were observed to occupy the cavities and vesicles on the construction waste grains. However, the experimental data shows that the strength improvement is not significant with the addition of only construction waste.     

Laboratory Estimation of Rock Joint Stiffness and Frictional Parameters

Numerical modeling of complex rock engineering problems involves the use of various input parameters which control usefulness of the output results. Hence, it is of utmost importance to select the right range of input physical and mechanical parameters based on laboratory or field estimation, and engineering judgment. Joint normal and shear stiffnesses are two popular input parameters to describe discontinuities in rock, which do not have specific guidelines for their estimation in literature. This study attempts to provide simple methods to estimate joint normal and shear stiffnesses in the laboratory using the uniaxial compression and small-scale direct shear tests. Samples have been prepared using rocks procured from different depths, geographical locations and formations. The study uses a mixture of relatively smooth natural joints and saw-cut joints in the various rock samples tested. The results indicate acceptable levels of uncertainty in the calculation of the stiffness parameters and provide a database of good first estimates and empirical relations which can be used for calculating values for joint stiffnesses when laboratory estimation is not possible. Joint basic friction angles have also been estimated as by-products in the small scale direct shear tests.     

Investigation of Cycle Time Segments of Dragline Operation in Surface Coal Mine: A Statistical Approach

Dragline is highly capital intensive equipment to procure, operate and maintain in any surface mining operation. Given this, every second of operation of this capital intensive equipment is absolutely important. Improvement of even a single second in the total cycle time has a tremendous bearing on the overall performance of this equipment. In this light, the present paper is an endeavour to critically analyze the cycle time of dragline operations in a major surface coal mine in India. Rigorous statistical analysis has been performed on individual cycle time segments, of complete dragline cycle. The segmental cycle times have been found to be statistically significant and appear to be best represented by lognormal, normal and beta distributions. Furthermore, the mean time of the statistical distribution for segmental cycle time of dragline has revealed the dependence of cycle time on cut geometry and depth. Results have been illustrated in the form of figures, graphs and tables.     

Behavior of Shallow Strip Footing on Twin Voids

This paper numerically examines the bearing capacity and failure mechanism of a shallow strip foundation constructed above twin voids. The voids may refer to caves, caverns, underground aqueduct or tunnels due to water seepage, chemical reaction or deliberately excavated in soil deposit. The ability of numerical model to accurately predict the system behavior is evaluated by performing verification analyses on existing researches. Subsequently, a parametric study carried out to reveal the influence of size of footing/voids and their location (i.e. depth, spacing, eccentricity) on the bearing capacity of footing. To clarify the failure mechanism, the distribution of shear strain in the soil for different scenarios is assessed. The parametric study provided a new framework to determine the bearing capacity and the mode of failure for footings on voids. Based on the results, a criterion can be issued to avoid collapse of footing/voids regarding the shape, location and size of voids. The results can also be used to design construction of a footing on existing voids while the acquired failure mechanisms can be appointed to develop analytical solutions for this problem. Results demonstrated that a critical depth for voids and a critical distance between them exist where the influence on the ultimate bearing capacity of footing disappears.     

Shield Tunneling in Rock–Soil Interface Composite Formations

With increased demand for the tunnel construction in rock–soil interface composite formations, the influence on surrounding environment especially the excavation face instability during construction and ground settlement in the long term has gained great attention. The researches about environmental disturbance by shield tunneling construction in single ground as the soil or rock conditions have been developed continuously. However, due to the complexity and uncertainty of the interaction between rock–soil interface composite formations and shield machines, works on these special conditions have not been carried out sufficiently. In this paper the theoretical, experimental and numerical researches on the excavation face stability and ground settlement are discussed while the in situ datum are used to support them. First, the typical projects in rock–soil interface composite formations are listed and the difficulties met are summarized. Second, the failure model of excavation face and support pressure from the tunneling shield in rock–soil interface composite formations are discussed. Then, a comprehensive survey of the factors of ground settlement during and after construction and some effective prediction models are made. Finally, the existing problems and directions for future research are introduced.     

Parametric Study and Centrifuge-Test Verification for Amplification and Bending Moment of Clay–Pile System Subject to Earthquakes

This paper examines seismic effects on fixed-head, end-bearing piles installed through soft clay. The numerical analyses were conducted using ABAQUS with a hypoelastic constitutive model for the clay. The dimensionless parameters involving the major parameters such as pile modulus, soil modulus, slenderness ratio, natural frequencies of clay layer and pile–raft, superstructure mass, density of the soil and peak ground acceleration were obtained from the parametric studies. The relationships for the amplification of ground motions and the maximum bending moment in the pile were developed based on regression of the numerical data. The computed results from the proposed relationships were compared with the results reported in the past studies.