An analytical study on three‐dimensional versus two‐dimensional water table‐induced flow patterns in a Tóthian basin

Although it has been increasingly acknowledged that groundwater flow pattern is complicated in the three‐dimensional (3‐D) domain, two‐dimensional (2‐D) water table‐induced flow models are still widely used to delineate basin‐scale groundwater circulation. However, the validity of 2‐D cross‐sectional flow field induced by water table has been seldom examined. Here, we derive the analytical solution of 3‐D water table‐induced hydraulic head in a Tóthian basin and then examine the validity of 2‐D cross‐sectional models by comparing the flow fields of selected cross sections calculated by the 2‐D cross‐sectional model with those by the 3‐D model, which represents the “true” cases. For cross sections in the recharge or discharge area of the 3‐D basin, even if head difference is not significant, the 2‐D cross‐sectional models result in flow patterns absolutely different from the true ones. For the cross section following the principal direction of groundwater flow, although 2‐D cross‐sectional models would overestimate the penetrating depth of local flow systems and underestimate the recharge/discharge flux, the flow pattern from the cross‐sectional model is similar to the true one and could be close enough to the true one by adjusting the decay exponent and anisotropy ratio of permeability. Consequently, to determine whether a 2‐D cross‐sectional model is applicable, a comparison of hydraulic head difference between 2‐D and 3‐D solutions is not enough. Instead, the similarity of flow pattern should be considered to determine whether a cross‐sectional model is applicable. This study improves understanding of groundwater flow induced by more natural water table undulations in the 3‐D domain and the limitations of 2‐D models accounting for cross‐sectional water table undulation only.     

Shallow sediment deformation styles in north-western Campeche Knolls,Gulf of Mexico and their controls on the occurrence of hydrocarbon seepage

During German R/V Meteor M67/2 expedition to Campeche Knolls, southern Gulf of Mexico, a set of 2D high resolution seismic data was acquired to study the near-surface sediment structure and its relationship with hydrocarbon seepages in this salt province. The comprehensive survey covered 20 individual bathymetric highs or ridges and identified three principle structural types: Passive Type, Chaopopte Type, and Asymmetric Flap Type. The first type is the result of passive diapirism, whereas the latter two were initialized by a regional compressional event in the Miocene, but are later differently modified by salt tectonism. Chapopote Type structures appear as symmetrical domes, with uplifted coarse-grained Miocene sediments in their cores and rather thin syn-kinematic sediments covering the crests. Asymmetric Flap Type structures are also first folded as domes or ridges, but one flap later subsided together with salt evacuation, resulting in single uplifted monoclines. With the coarse-grained pre-kinematic sediments as reservoir units, both structural types can focus and accumulate hydrocarbons. The geometries of the structures suggest that hydrocarbons are accumulated in the center of the Chapopote Type structures and in the subsided flaps of the Asymmetric Flap Type structures. Hydrocarbon leakage from these thinly sealed reservoirs is regarded as the principle mechanism for the seepage in the study area, and accordingly the most seepage-prone positions are above these reservoirs. The seep locations suggested by analysis of sea-surface oil slick images of SAR satellite data are also examined in this study. These independently derived seep locations confirm the seepage-prone positions to be above the shallow buried reservoirs. This study suggest that the shallow sediment structures control the distribution of the hydrocarbon seeps of the north-western Campeche Knolls, although the hydrocarbons are sourced from the greater depth.     

Influence of heterogeneity on unsaturated hydraulic properties: (1) local heterogeneity and scale effect

Spatial heterogeneity is ubiquitous in nature, which may significantly affect the soil hydraulic property curves. The models of a closed‐form functional relationship of soil hydraulic property curves (e.g. VG model or exponential model) are valid at point or local scale based on a point‐scale hydrological process, but how do scale effects of heterogeneity have an influence on the parameters of these models when the models are used in a larger scale process? This paper uses a two‐dimensional variably saturated flow and solute transport finite element model (VSAFT2) to simulate variations of pressure and moisture content in the soil flume under a constant head boundary condition. By changing different numerical simulation block sizes, a quantitative evaluation of parameter variations in the VG model, resulting from the scale effects, is presented. Results show that the parameters of soil hydraulic properties are independent of scale in homogeneous media. Parameters of α and n in homogeneous media, which are estimated by using the unsaturated hydraulic conductivity curve (UHC) or the soil water retention curve (WRC), are identical. Variations of local heterogeneities strongly affect the soil hydraulic properties, and the scale affects the results of the parameter estimations when numerical experiments are conducted. Furthermore, the discrepancy of each curve becomes considerable when moisture content becomes closer to a dry situation. Parameters estimated by UHC are totally different from the ones estimated by WRC. Copyright © 2012 John Wiley & Sons, Ltd.     

Paleogene of the Huanghekou Sag in the Bohai Bay Basin,NE China: deposition–erosion response to a slope break system of rift lacustrine basins

The sequence architecture and depositional systems of the Paleogene lacustrine rift succession in the Huanghekou Sag, Bohai Bay Basin, NE China were investigated based on seismic profiles, combined with well log and core data. Four second‐order or composite sequences and seven third‐order sequences were identified. The depositional systems identified in the basin include: fan delta, braid delta, meander fluvial delta, lacustrine and sublacustrine fan. Identification of the slope break was conducted combining the interpretation of faults of each sequence and the identification of syndepositional faults, based on the subdivision of sequence stratigraphy and analysis of depositional systems. Multiple geomorphologic units were recognized in the Paleogene of the Huanghekou Sag including faults, flexures, depositional slope break belts, ditch‐valleys and sub‐uplifts in the central sag. Using genetic division principles and taking into consideration tectonic features of the Paleogene of the Huanghekou Sag, the study area was divided into the Northern Steep Slope/Fault Slope Break System, the Southern Gentle Slope Break System and T10 Tectonic Slope Break System/T10 Tectonic Belt. Responses of slope break systems to deposition–erosion are shown as: (1) basin marginal slope break is the boundary of the eroded area and provenance area; (2) ditch‐valley formed by different kinds of slope break belts is a good transport bypass for source materials; (3) shape of the slope break belt of the slope break system controls sediments types; (4) the ditch‐valley and sub‐sag of a slope break system is an unloading area for sediments; and (5) due to their different origins, association characteristics and developing patterns, the Paleogene slope break belt systems in the Huanghekou Sag show different controls on depositional systems. The Northern Fault Slope Break system controls the deposition of a fan delta‐lacustrine‐subaqueous fan, the Southern Gentle Slope Break system controls the deposition of a fluvial–deltaic–shallow lacustrine and sublacustrine fan, and the T10 Tectonic Slope Break System controls the deposition of shallow lacustrine beach bar sandbodies. The existence of a slope break system is a necessary but not a sufficient condition for studying sandbody development. The formation of effective sandbodies along the slope break depends on the reasonable coupling of effective provenance, necessary association patterns of slope break belt, adequate unloading space and creation of definite accommodation space. Copyright © 2013 John Wiley & Sons, Ltd.     

L1范数与IQR统计量组合的GNSS坐标序列粗差探测算法

GNSS坐标时间序列中不可避免地含有粗差,未剔除的粗差将会导致参数估计有偏。因此,粗差探测与剔除是GNSS坐标序列分析中一项重要的数据预处理工作。针对GNSS坐标时间序列特点,提出了一种将L1范数(L1-norm)估计与四分位距统计量IQR(interquartile range)组合的移动开窗粗差探测算法,称之为L1_Mod IQR。该方法的主要思想是,首先利用L1范数估计得到较"真实"的残差,然后再对残差采用IQR统计量进行粗差探测。将L1_Mod IQR法与"3σ"法、基于最小二乘的τ检验法等粗差探测算法进行了模拟计算与对比,验证了该算法的有效性。进一步采用L1_Mod IQR算法对中国区域10个IGS站的高程时间序列进行了分析,结果表明中国区域IGS站高程序列的粗差剔除率最小为0.1%,最大为2.6%。并且以WUHN站为例与SOPAC提供的结果进行了对比,结果表明SOPAC提供的"Clean"数据仍含有大量的粗差,而L1_Mod IQR算法能够有效地剔除粗差。     

面向WebGL的矢量数据三维绘制技术

矢量数据的叠加显示能够提高三维虚拟地球的表达效果与分析能力。受限于GPU的计算精度,在三维虚拟地球中矢量数据绘制普遍存在抖动现象和深度冲突现象。对基于WebGL的矢量数据三维绘制中计算精度问题进行了分析,提出了使用CPU RTC技术和GPU RTE技术提高顶点变换的精度,使用多视锥渲染算法和深度平面技术解决深度缓存精度问题。实验证明,这几种技术和算法可以有效缓解抖动现象和深度冲突现象导致的视觉干扰,改善了各种尺度和范围的矢量数据在三维地形上的叠加显示效果。     

GNSS相应坐标系之间的关系及其影响

不同的GNSS采用的坐标系定义几乎相近,但参考椭球及其坐标实现不同,这将影响多GNSS融合导航定位效果。根据各GNSS坐标系所采用参考椭球的基本常数,计算比较了不同坐标系参考椭球参数的差异;导出了相应的正常重力公式,比较了这些正常重力公式确定的正常重力值差异;最后分别从坐标系统的定义与实现两个方面分析了其对定位结果的影响。结果表明:1)GPS(BDS)与Galileo和GLONASS所使用的参考椭球引起正常重力差约为0.15和0.30 mgal;2)GPS与BDS,Galileo及GLONASS所使用参考椭球引起纬度分量最大差异约为0.1 mm,3 cm和3 cm,高程分量约为0.1 mm,0.5 m和1 m;3)各GNSS所使用坐标框架间转换参数引起的坐标变化达到厘米级。     

渝东南下古生界页岩构造裂缝形成及分布控制因素

天然裂缝对页岩气储集和渗流有重要影响,但目前对页岩构造裂缝研究不够深入。本文通过露头、岩心裂缝观察和分析,探讨了渝东南下古生界页岩构造裂缝类型、形成机理及分布控制因素。基于裂缝特征及力学成因,将剪切裂缝分为高角度剪切裂缝、倾斜滑脱裂缝和水平滑脱裂缝。倾斜滑脱裂缝是在上覆岩层重力和水平构造应力共同作用下沿应力集中的软弱面发生剪切滑动形成,水平滑脱裂缝是在构造挤压应力作用条件下主要沿页理面方向的剪切或层间滑动形成;页理发育程度及岩层曲率是控制水平滑脱裂缝形成的关键因素,岩石矿物组成、构造作用及岩层厚度是控制其它类型构造裂缝形成和分布的主要因素,页岩岩石力学层的划分需要根据裂缝特征、岩性变化特征、岩石力学参数及沉积界面等综合确定,岩层厚度与层间构造裂缝密度呈负相关关系。     

三维古构造恢复技术在油气评价中的应用——以珠江口盆地番禺-流花地区为例

目前常用的古构造图的制作方法为"厚度图法"和"断层平移法",这两种方法对断控圈闭为主的古构造恢复具有一定的局限性,且不能定量化的研究古构造生长发育情况。本论文首次将三维古构造恢复技术应用于珠江口盆地番禺-流花地区。三维古构造恢复技术在应用时,避免了厚度异常现象,实现了去压实恢复,能够更真实的反映古构造情况。该技术在珠江口盆地番禺流花地区"A"构造的应用,达到了定量分析古构造发育的效果,并且认识到了A构造在关键时期T32时期古构造幅度较小,后期构造幅度增大是A构造充满度过低的重要原因之一。