基于GIS和RS的西藏森林火险等级计算方法

基于遥感技术(RS)和地理信息系统(GIS),利用由基于DEM演算的地面最高温度、最小相对湿度和最大风速等格点化气象要素,FY2静止气象卫星逐日降水反演产品和AVHRR积雪监测产品计算网格森林火险天气等级,结合由植被类型、NDVI、地形要素和公路、人口聚居地等要素评估的森林火险风险等级,综合计算得到网格化的西藏森林火险等级。该项业务程序基于MeteoInfo组件建立,能够实现全自动化业务运行。对于森林火灾事件,通过与基于气象站的森林火险天气等级相比,该方法的准确性更高,能为西藏林区森林防火工作提供有效参考。     

蜀南地区下三叠统飞仙关组沉积相

蜀南地区飞仙关组的沉积相类型主要有浑水陆棚相与清水陆棚相,东部两者交替发育,中西部则主要为浑水陆棚相。浑水陆棚相以半局限海亚相为主,包括三个微相;清水陆棚相可分为颗粒滩、滩间、潮坪和内缘斜坡等四个亚相,包括若干微相。飞一段全区为清水陆棚相;飞二段全区均为浑水陆棚亚相的泥质半局限海微相;飞三段,西部为浑水陆棚相,东部为清水陆棚相,其间发育灰泥质半局限海微相;飞四段基本为泥质半局限海微相。飞一时,区内中部有一近南北向的台内凹槽,沿凹槽边缘鲕粒滩较发育。研究区以西的康滇古陆和龙门山岛链与华蓥山断裂带控制着区内沉积相展布,当康滇古陆和龙门山岛链构造活跃时全区发育浑水陆棚,华蓥山断裂带活动时东部发育清水陆棚;当康滇古陆、龙门山岛链与华蓥山断裂带构造的活动性都较低时,全区以清水陆棚为主。     

双向压缩条件下非均匀断层标本变形过程中的声发射活动特征

在双向压缩条件下,研究了一种非均匀断层模型标本在变形过程中的声发射(AE)时空特征.结果表明,随侧向应力sigma;2的增大,断层破裂强度提高,自加载至破坏的时间延长,破坏形式由突发失稳逐渐转变为渐进式破坏.预制断层及其非均匀性对标本变形过程中AE空间分布图象起明显的控制作用.预制断层,特别是预制断层上的强度不均匀部位及高强度段落,控制着微破裂空间分布的总体格局.破裂局部化均起始于断层上强度不均匀部位,随侧向应力sigma;2的增大,微破裂密集区域从预制断层强度不均匀部位逐渐扩展到整个高强度区段.侧向应力sigma;2的大小对AE时序特征具有显著影响.较低sigma;2条件下,断层表现为突发失稳,失稳发生在微破裂活动ldquo;增强-平静rdquo;的背景之上;而较高sigma;2条件下,断层表现为渐进式破坏,破坏前后AE频次持续增加,AER呈指数增长.sigma;2对b值变化也具有一定影响.当断层破坏表现为突发失稳时,b值在弹性阶段后期至弱化阶段显示出ldquo;前兆rdquo;性降低;而当断层表现为渐进式破坏时,b值变化平稳.      

安徽齐云山丹霞地貌成因

According to the study of some local scholars (Peng Hua et al., 2000), over 400 sites of Danxia landform have been already discovered in China. Chen Guoda (1935), Zeng Zhaoxuan et al. (1978), Huang Jin et al. (1992; 1994; 1996) and Peng Hua et al. (1998; …     

21世纪中国主要粮食产区的空间格局特征

Grain production is an important issue for the national economy and the livelihood of the Chinese people. It serves as the foundation of national development and social stability. China is a major grain producer as well as a major grain consumer. The grai…     

镜泊湖火山监测台网监测能力初步分析

介绍了镜泊湖火山台网的组成,并对其监测能力进行了初步估算,结果表明,镜泊湖火山台网的近震监测能力完全满足设计要求,在距台网中心50km范围内,ML0以上地震都能准确定位。     

利用Windows XP实现单位业务的远程处理

计算机远程控制是地震台站的未来发展方向,利用Windows XP可以实现单位业务的远程处理,切实提高工作效率。     

钢筋混凝土底层柔性结构的需求变形能力

本文提出用累积延性系数评价底层柔性结构的底层需求变形能力,并根据地震时能量守恒关系推导了底层需求变形能力计算公式,然后对多质点体系使用实际地震加速度记录进行弹塑性响应分析,并与上述公式的计算结果进行比较。结果表明,本文提出的计算公式能够较好并安全地预测底层柔性结构的需求变形能力。     

SLJ-100DH型井下数字三分向力平衡加速度计装置研制

介绍了新研制的井下数字三分向力平衡加速度计装置技术性能、工作原理,分析讨论了仪器的特点。     

利用GPS拖体在万山区域测量平均海面技术研究

Wanshan area has been chosen to be the specified field to calibrate and validate(Cal/Val) the HY-2 altimeter and its follow-on satellites. In March 2018, an experiment has been conducted to determine the sea surface height(SSH) under the HY-2 A ground track(Pass No. 203). A GPS towing-body(GPS-TB) was designed to measure the SSH covering an area of about 6 km×28 km wide centered on the HY-2 A altimeter satellite ground track. Three GPS reference stations, one tide gauge and a GPS buoy were placed in the research area, in order to process and resolve the kinematic solution and check the precision of the GPS-TB respectively. All the GPS data were calculated by the GAMIT/GLOBK software and TRACK module. The sea surface was determined by the GPS-TB solution and the tide gauge placed on Zhiwan Island. Then the sea surface of this area was interpolated by Arc GIS10.2 with ordinary Kriging method. The results showed that the precision of the GPS-TB is about 1.10 cm compared with the tide gauge placed nearby, which has an equivalent precision with the GPS buoy. The interpolated sea surface has a bias of –1.5–4.0 cm with standard deviation of 0.2–2.4 cm compared with the checking line. The gradient of the measured sea surface is about 1.62 cm/km along the HY-2 orbit which shows a good agreement compared with the CLS11 mean sea surface(MSS). In the Cal/Val of satellites, the sea surface between the tide gauge/GPS buoy and the footprint of altimeter can be improved by this work.