A non-hydrostatic model for the numerical study of landslide-generated waves

This paper proposes and demonstrates a two-layer depth-averaged model with non-hydrostatic pressure correction to simulate landslide-generated waves. Landslide (lower layer) and water (upper layer) motions are governed by the general shallow water equations derived from mass and momentum conservation laws. The landslide motion and wave generation/propagation are separately formulated, but they form a coupled system. Our model combines some features of the landslide analysis model DAN3D and the tsunami analysis model COMCOT and adds a non-hydrostatic pressure correction. We use the new model to simulate a 2007 rock avalanche-generated wave event at Chehalis Lake, British Columbia, Canada. The model results match both the observed distribution of the rock avalanche deposit in the lake and the wave run-up trimline along the shoreline. Sensitivity analyses demonstrate the importance of accounting for the non-hydrostatic dynamic pressure at the landslide-water interface, as well as the influence of the internal strength of the landslide on the size of the generated waves. Finally, we compare the numerical results of landslide-generated waves simulated with frictional and Voellmy rheologies. Similar maximum wave run-ups can be obtained using the two different rheologies, but the frictional model better reproduces the known limit of the rock avalanche deposit and is thus considered to yield the best overall results in this particular case.     

Acquiring high-resolution topography and performing spatial analysis of loess landslides by using low-cost UAVs

The Loess Plateau is a region in China prone to frequent geological disasters, where thousands of loess landslides can be found. Conventional field survey methods are inadequate for the requirements of fine spatial analysis of landslides. Due to its numerous advantages (fast, efficient, low cost, safe, and able to acquire high-resolution data), structure from motion (SfM) technique to photogrammetric orientation of flights and modeling applied to photographs taken by unmanned aerial vehicles (UAVs) equipped with a camera has become a powerful new tool for the generation of high-resolution topography that has emerged in recent years, which has become a powerful new technique for acquiring high-resolution topographic data. In this study, we conducted nearly two months of field UAV surveys of loess landslides on the Loess Plateau, eventually established 3D digital models for 11 loess landslides, and produced high-resolution digital orthophoto maps (DOMs) and digital elevation models (DEMs). High-resolution spatial analysis of the loess landslides (mainly including characteristic parameter extraction, topography profile analysis, surface feature analysis, and hydrologic analysis) was performed using Agisoft PhotoScan, ArcGIS 10.2, Global Mapper 17, and Origin Pro 9.0. The UAV technique allows us to further understand the micro-level internal spatial and structural characteristics of loess landslides. Moreover, not only does it allow us to accurately measure the characteristic geometric parameters but also enables us to detect the surface details of loess landslides (e.g., textures, fissures, and micro-landforms). Manifestly, we can also deduce the original structural characteristics and possible inducement mechanism of landslides based on a combination of high-resolution data acquired by UAVs, proper ground surveys, and theoretical knowledge. In summary, the low-cost UAVs are highly and especially suitable for surveys and digital terrain analysis of landslides on the Loess Plateau with sparse vegetation.     

Probabilistic calibration of a coupled hydro-mechanical slope stability model with integration of multiple observations

Multiple types of responses, such as displacements, ground water level, pore water pressures, water contents, etc., are usually measured in comprehensive monitoring programmes for rainfall-induced landslide prevention. In this study, a probabilistic calibration method for coupled hydro-mechanical modelling of slope stability is presented with integration of multiple types of measurements. A numerical example of a soil slope under rainfall infiltration is illustrated to compare the effects of single and multiple types of responses on parameter estimation and model calibration. The results show that the soil parameters can be estimated with less uncertainty and total uncertainty bounds are narrower with multiple types of responses than with a single type of response. Model calibration based on multiple types of responses can compromise different responses and hence the means and standard deviations of model error are the smallest. A feasible correlation coefficient between soil modulus and permeability can be obtained from model calibration with multiple types of responses and single type of response as long as the responses include displacement data.     

Paleogene–Neogene Boundary of Primorye,Russian Far East

Complex geological and paleobotanic analysis of sections of the boundary Oligocene–Miocene sediments of southern Primorye is conducted. The presence of a stratigraphic hiatus is identified in the transitional complexes of the Pushkino and Pavlovka depressions but not in the sections of the Rakovka depression; thus, it is suggested to use one of them (borehole no. 15) to choose the stratotype of the Paleogene–Neogene boundary. The previous conclusion on the presence of economic coal deposits of Primorye within the Paleogene part of the Tertiary complex is supported. It is suggested to use the section which is exposed by the Rakovka brown coal open pit (point 9209) as a stratotype of the upper subformation of the Pavlovka Formation.     

Correlation analysis between drought indices and terrestrial water storage from 2002 to 2015 in China

Drought monitoring is a key topic in environmental monitoring and assessment although there is still a need to determine the correlation between drought monitoring indices and remote sensing products. We analyzed the correlation between the self-calibrating Palmer Drought Severity Index (sc_PDSI), the Standardized Precipitation Index and the Standardized Precipitation Evapotranspiration Index (SPEI) and terrestrial water storage monitored through the Gravity Recovery and Climate Experiment (GRACE) on a monthly timescale from 2002 to 2015 in China. As a consequence of anomalies in the soil water budget, the highly significant correlation between the sc_PDSI and the GRACE satellite-observed terrestrial water storage suggested that these two datasets are the most suitable for use in monitoring droughts. In comparing the three drought indices, the sc_PDSI was introduced as a means of drought monitoring in the Yangtze, Pearl, Huaihe, Southeast and Songhua River Basins, whereas the SPEI was found to be more applicable to other major river basins, such as the Inland River Basin. These diverse spatial behaviors are caused by the differences between the hydrological droughts characterized by these three drought indices.     

A micro–macro investigation of the capillary strengthening effect in wet granular materials

Wet granular materials are three-dimensionally simulated by the discrete element method with water bridges incorporated between particles. The water bridges are simplified as toroidal shapes, and the matric suction is constantly maintained in the material. A comparison with experimental tests in the literature indicates that the toroidal shape approximation may be one of the best choices with high practicability and decent accuracy. Mechanical behaviours of wet granular materials are studied by triaxial tests. Effects of particle size distributions and void ratios are investigated systematically in this study. The hydraulic limit of the pendular state is also discussed. It gives the capillary cohesion function which is not only determined by the degree of saturation but also positively correlated to relative density and particle size polydispersity and inversely proportional to mean particle size. Furthermore, the capillary strengthening effect is also analysed microscopically in aid of the Stress–Force–Fabric relationship, mainly in fabric anisotropy, coordination number and stress transmission pattern, which revealed the micro-mechanisms of the additional effective stress induced by capillary effect.     

Laboratory investigations of inert gas flow behaviors in compact sandstone

The seepage evolution behavior of compact rock is significant for the stability and safety of many engineering applications. In this research, both hydrostatic and triaxial compression tests were conducted on compact sandstone using an inert gas, namely argon. A triaxial compression test with a water permeability measurement was carried out to study the difference between the gas permeability and water permeability evolutions during the complete stress–strain process. Based on the experimental data, the hydrostatic stress-dependent gas permeability was discussed firstly. A second-order function was proposed to predict and explain the gas slippage effect. The mechanical properties and crack development of the sandstone samples were discussed to better understand the permeability evolution with crack growth during the complete stress–strain process. The results show that the gas permeability evolution can be divided into five stages according to the different crack growth stages. Then, the permeability changes in the crack closure stress \( \sigma_{\text{cc}} \), crack initiation stress \( \sigma_{\text{ci}} \), crack damage stress \( \sigma_{\text{cd}} \) and peak stress \( \sigma_{\text{p}} \) with confining pressures were analyzed. Finally, we found that the difference between the corrected gas permeability and water permeability can be attributed to the interaction between the water and sandstone grains.     

Effect of climate change on water resources in the Yuanshui River Basin: a SWAT model assessment

The Yuanshui River Basin is one of the most important river basins ensuring food production and livelihoods in the Hunan and Guizhou Provinces of China. Based on digital elevation model, land use, soil, and meteorological data, the soil and water assessment tool was used to analyze the response of water resources in the basin to climate change. Specifically, the monthly runoff from the Yuanshui River Basin was simulated. Runoff measurements from the 1961–1990 series were used to calibrate model parameters, and measurements from the 1991–2010 series were used for model validation. The Nash–Sutcliffe efficiency coefficient, correlation coefficient, and water balance error were used to evaluate the simulation results; the values obtained for these parameters were 0.925, 0.929, and 2.0%, respectively, indicating that the established model can be applied successfully to runoff simulations. To evaluate the effects of climate change and human activities on runoff, 24 different climate scenarios were modeled. By comparing the model simulation results with the baseline scenario, the effects of climate change were analyzed by year, during the dry season, and during extremely dry conditions. The results showed that runoff decreased with increasing air temperature and decreasing precipitation, and that the effects of rainfall on runoff were greater than those of air temperature. Under the same baseline conditions, the effects of climate change on runoff were most pronounced during extremely dry months.     

Behavior of Hydrocarbons in the Mouth Parts of Arctic Rivers

The paper reviews data (acquired in 2007–2016) on aliphatic and polycyclic aromatic hydrocarbons in comparison with data on concentrations of lipids, C_org, and chlorophyll a in the water and bottom sediments the river–sea geochemical barrier (for the Northern Dvina, Ob, Yenisei, and Lena rivers). It was established that the concentrations of anthropogenic hydrocarbons decrease and these compounds precipitate like other organic compounds and particulate matter, where riverine and marine waters mix. Relatively pure water flows in the pelagic zones of seas. In spite of low temperatures in the Arctic, anthropogenic hydrocarbons transform so rapidly that natural compounds dominate in the water and bottom sediments: autochthonous in the seawater and allochthonous in the bottom sediments.