Disturbance of recruitment success of mantis shrimp in Tokyo Bay associated with effects of hypoxia on the early life history

We investigated effects of severe hypoxia (dissolved oxygen <1 ml l⁻¹) on recruitment of mantis shrimp Oratosquilla oratoria in Tokyo Bay. Ten-year field surveys were conducted to examine quantitative relationships in annual mean densities of larvae and juveniles, and spatial distribution of juveniles and severe hypoxia. There was no significant correlation between annual mean densities of larvae and juveniles, suggesting that mortality during larval or juvenile stages varies among years, which might have regulated abundance of young-of-the-year juveniles. Juvenile density was low in the severely hypoxic area, implying that hypoxia could affect survivals and spatial distribution of juveniles. Meanwhile, there are yearly fluctuations in juvenile density in normoxic areas of both northern and southern part of the bay. This evidence suggests that abundance of post-settled juveniles might have been determined by not only effects of hypoxia, but also other factors influencing mortality during the early life stages.     

Temperature measurements of electrostatic shocks in?laser-produced counter-streaming plasmas

Collisionless shocks in counter-streaming plasmas, created by the high-power laser system Gekko XII HIPER, are investigated. The shock structure and density are measured by optical diagnostics such as shadowgraphy, interferometry, and streaked interferometry. The plasma density and temperature are estimated from self-emission measurements with visible light by streaked optical pyrometer and gated optical imager. Brightness temperatures are calculated considering the efficiency of the detectors, and electron temperatures are estimated.     

Effects of plant roots on the soil erosion rate under simulated rainfall with high kinetic energy

ABSTRACT

This study examined the effects of herbaceous plant roots on interrill erosion using two herbaceous species: clover (Trifolium repens) and oats (Avena sativa). We developed a simple rainfall simulator with relatively high normalized kinetic energy (KE; 23.2 J m^?2 mm^?1). Under simulated rainfall, we measured eroded soil for 42 boxes with various amounts of aboveground and belowground biomass. Aboveground vegetation had a significant effect on the soil erosion rate (SER). We found a clear negative relationship between the percent vegetation cover (c) and the SER. In contrast, plant roots showed no effects on the SER. The SER was not significantly different between the boxes with and without plant roots under similar c conditions. Thus, plant roots could have less of an effect on the SER under higher KE conditions.

Editor M.C. Acreman Associate editor N. Verhoest     

Development of a GPGPU-parallelized hybrid finite-discrete element method for modeling rock fracture

The hybrid finite-discrete element method (FDEM) is widely used for engineering applications, which, however, is computationally expensive and needs further development, especially when rock fracture process is modeled. This study aims to further develop a sequential hybrid FDEM code formerly proposed by the authors and parallelize it using compute unified device architecture (CUDA) C/C++ on the basis of a general-purpose graphics processing unit (GPGPU) for rock engineering applications. Because the contact detection algorithm in the sequential code is not suitable for GPGPU parallelization, a different contact detection algorithm is implemented in the GPGPU-parallelized hybrid FDEM. Moreover, a number of new features are implemented in the hybrid FDEM code, including the local damping technique for efficient geostatic stress analysis, contact damping, contact friction, and the absorbing boundary. Then, a number of simulations with both quasi-static and dynamic loading conditions are conducted using the GPGPU-parallelized hybrid FDEM, and the obtained results are compared both quantitatively and qualitatively with those from either theoretical analysis or the literature to calibrate the implementations. Finally, the speed-up performance of the hybrid FDEM is discussed in terms of its performance on various GPGPU accelerators and a comparison with the sequential code, which reveals that the GPGPU-parallelized hybrid FDEM can run more than 128 times faster than the sequential code if it is run on appropriate GPGPU accelerators, such as the Quadro GP100. It is concluded that the GPGPU-parallelized hybrid FDEM developed in this study is a valuable and powerful numerical tool for rock engineering applications.     

Mineralogy and Isotope Geochemistry of Active Submarine Hydrothermal Field at Suiyo Seamount, Izu–Bonin Arc, West Pacific Ocean

This report presents mineralogical, geochemical and isotopic data on samples obtained using the Benthic Multi‐coring System (BMS) to drill a submarine hydrothermal deposit developed in a caldera on the summit of the Suiyo Seamount in the Izu–Bonin Island Arc, south of Japan. This deposit is regarded as the first example of Kuroko‐type sulfide mineralization on a volcano at the volcanic front of an island arc. The mineralization and hydrothermal alteration below the 300 × 150‐m area of active venting was investigated to depths of 2–9 m below the sea floor. Drilling beneath the area of active venting recovered a sequence of altered volcanic rocks (dacite lavas, pyroclastic rocks of dacite–rhyolite compositions and pumice) associated with sulfide veining and patches/veins of anhydrite. No massive sulfide was found, however, and the subsea‐floor mineralization to 10 m depth is dominated by anhydrite and clay minerals with some sulfides. Sulfide‐bearing samples contained high Au (up to 42 ppm), Ag (up to 263 ppm), As (up to 1550 ppm), Hg (up to 55 ppm), Sb (up to 772 ppm), and Se (up to 24 ppm). Electron probe microanalyzer indicated that realgar, orpiment, and mimetite were major As‐bearing minerals. The sulfides were also characterized by high Zn (>10%) compared to Cu (<6.3%) and Pb (<0.6%). The δ²⁰²Hg/¹⁹⁸Hg, δ²⁰²Hg/¹⁹⁹Hg and δ²⁰²Hg/²⁰⁰Hg of the sulfide‐bearing dacite samples and a sulfide chimney decreased with increasing Hg/Zn concentration ratio. The variation of the δ²⁰²Hg/¹⁹⁸Hg ranged from ?2.8 to +0.5‰ to relative to S‐HG02027. The large range of these δ²⁰²Hg/¹⁹⁸Hg was greater than might be expected for such a heavy element and may be due to a predominance of kinetic effects. The variation of δ²⁰²Hg/¹⁹⁸Hg of sulfide‐bearing dacite samples suggested that light Hg isotope in the vapor mixed with oxygenated seawater near sea floor during mineralization. Lead isotope ratios of the sulfide were very similar to those of the dacite lava, suggesting that lead is of magmatic origin. The ⁸⁷Sr/⁸⁶Sr ratio (0.70872) of anhydrite was different from that of the dacite lava, and suggests an Sr derivation predominantly from seawater. Hydrothermal alteration of the dacite in the Suiyo hydrothermal field was characterized by Fe‐sulfides, anhydrite, barite, montmorillonite, chlorite/montmorillonite mixed‐layer minerals, mica, and chlorite with little or no feldspar or cristobalite. Hydrothermal clay minerals changed with depth from montmorillonite to chlorite/montmorillonite mixed‐layer minerals to chlorite and mica. Hydrogen isotope ratios of chlorite/montmorillonite and mixed‐layer, mica‐chlorite composites obtained below the active venting sites ranged from ?49 to ?24‰, suggesting seawater as the dominant fluid causing alteration. Oxygen isotope ratios of anhydrite ranged from 9.2 to 10.4‰ and anhydrite formation temperatures were calculated to be 188–207°C. Oxygen isotope ratios ranged from +5.2 to +9.2‰ for montmorillonite, +3.2 to +4.5‰ for chlorite/montmorillonite mixed‐layer minerals, and +2.8 to +3.8‰ in mixtures of chlorite and mica. The formation temperatures of montmorillonite and of the chlorite–mica mixture were 160–250°C and 230–270°C, respectively. The isotope temperatures for clay minerals (220–270°C) and anhydrite (188°C) were significantly lower than the borehole temperature (308.3°C) measured just after the drilling, suggesting that temperature at this site is now higher than when clay minerals and anhydrite were formed.     

Wave Dispersion Study in the Indian Ocean-Tsunami of December 26, 2004

A numerical study which takes into account wave dispersion effects has been carried out in the Indian Ocean to reproduce the initial stage of wave propagation of the tsunami event that occurred on December 26, 2004. Three different numerical models have been used: the nonlinear shallow water (nondispersive), the nonlinear Boussinesq, and the full Navier-Stokes aided by the volume of fluid method to track the free surface. Numerical model results are compared against each other. General features of the wave propagation agreed very well in all numerical studies. However some important differences are observed in the wave patterns, i.e., the development in time of the wave front is shown to be strongly connected to the dispersion effects. Discussions and conclusions are made about the spatial and temporal distribution of the free surface reaffirming that the dispersion mechanism is important for tsunami hazard mitigation.     

Transformation textures,mechanisms of formation of high‐pressure minerals in shock melt veins of L6 chondrites,and pressure‐temperature conditions of the shock events

Abstract— The high‐pressure polymorphs of olivine, pyroxene, and plagioclase in or adjacent to shock melt veins (SMVs) in two L6 chondrites (Sahara 98222 and Yamato 74445) were investigated to clarify the related transformation mechanisms and to estimate the pressure‐temperature conditions of the shock events. Wadsleyite and jadeite were identified in Sahara 98222. Wadsleyite, ringwoodite, majorite, akimotoite, jadeite, and lingunite (NaAlSi₃O₈‐hollandite) were identified in Yamato 74445. Wadsleyite nucleated along the grain boundaries and fractures of original olivine. The nucleation and growth of ringwoodite occurred along the grain boundaries of original olivine, and as intracrystalline ringwoodite lamellae within original olivine. The nucleation and growth of majorite took place along the grain boundaries or fractures in original enstatite. Jadeite‐containing assemblages have complicated textures containing “particle‐like,” “stringer‐like,” and “polycrystalline‐like” phases. Coexistence of lingunite and jadeite‐containing assemblages shows a vein‐like texture. We discuss these transformation mechanisms based on our textural observations and chemical composition analyses. The shock pressure and temperature conditions in the SMVs of these meteorites were also estimated based on the mineral assemblages in the SMVs and in comparison with static high‐pressure experimental results as follows: 13–16 GPa, >1900 °C for Sahara 98222 and 17–24 GPa, >2100 °C for Yamato 74445.     

Recovery of surface albedo and plant cover after wildfire in a Picea mariana forest in interior Alaska

Albedo influences vegetation structure, permafrost thawing, etc., in particular, after wildfires in Picea mariana forests in Alaska, USA, while albedo changes with plant succession. To understand interactions between albedo and ecosystem recovery after wildfire, surface albedo was measured in the spring and summer of 2005 at Poker Flat, interior Alaska, where P. mariana forest was dominant. The ground surface was mostly covered with Sphagnum moss before the 2004 wildfire, and was variously burned by the fire. The measured wavelengths ranged from 0.3 to 3.0 μm. We measured four independent variables, incidence, plant cover on the forest floor, cover of burned ground surface, canopy openness and incidence, to examine the determinants on surface albedo. Multiple regression analysis showed that total plant cover positively and mostly determines albedo, indicating that plant recovery is prerequisite to return high albedo. When the ground surface was damaged by fire, changes in albedo were mostly derived from decrease in reflectance wavelengths between 0.7 and 1.4 μm. The fluctuations of reflectance wavelengths did not differ greatly between damaged-moss and burned surfaces. We must mention the dynamics of Sphagnum to understand various environmental changes including surface albedo.