Enhanced fault detection and exclusion based on Kalman filter with colored measurement noise and application to RTK

GPS Solutions - The tropospheric delay is an important error source in the Global Positioning System (GPS) positioning and navigation applications. Although most of the tropospheric delays can be...     

同ENSO现象相关联的日长亚季节变化

本文利用小波分析方法研究了地球自转日长亚季节近50天和近120天周期变化的时频特征．结果表明,日长近120天周期变化及近50天周期变化的振幅具有明显的年际变化．ENSO事件发生之前,日长近50天周期变化加强,进入ENSO时期,逐渐减弱,成为ENSO产生的先兆之一,同时,日长近120天周期变化显著增强80年代,日长近50天周期变化明显发生了两次周期分岔分岔的一种趋势经历了一个周期延长的过程,收敛于ENSO时期增强的近120天周期变化,该过程不仅与ENSO现象相关联而且可能受到近10年波动的调制作用.同时证实了日长近120天周期变化及近50天周期变化的激发机制主要是同频段的大气环流变化所导致。     

边角权匹配对城市大型导线网平差结果精度影响分析

通过某工业城市大型一级导线网观测成果的限差检验、观测数据处理，探讨导线网平差时、，边、角验权的合理选择和匹配，及其对平差结果的精度影响，从中得出一些认识和有益的经验。     

Robust abnormality detection methods for spatial search of radioactive materials

Radiological dirty bombs and improvised nuclear devices pose a significant threat to both public health and national security. Growing networks of radiation sensors have been deployed by a number of offices within the U.S. and international agencies. Detecting such threats while minimizing false alarm rates presents a considerable challenge to homeland security and public health. This research aims to achieve a higher probability of detection with a lower probability of false alarms. It focuses on the local spatial instability of radiation levels in order to detect radioactive materials based on robust outlier detection methods. Our approach includes a three‐step abnormality detection method consisting of one‐dimensional robust outlier detection for all gamma‐ray counts, a density‐based clustering analysis, and a two‐dimensional robust outlier detection method using a bagplot, based on spatial associations. The effectiveness of the method proposed is demonstrated through a case study, wherein radioactive materials are detected in urban environments, and its performance is compared with alternative methods employing a k‐sigma approach, local Getis–Ord () statistic, and the goodness of fit of the Poisson distribution.     

Model of wind-generated ambient noise in stratified shallow water

In order to build a rapid ocean ambient noise model adapted for a stratified shallow water, a hybrid model of normal mode method (for far field) and ray method (for near field) is suggested which combines the advantages of both methods. Since the near field of wind-generated noise is not sensitive to the sound speed profile, the sound speed profile is regarded as a constant; which makes the model rapid and accurate. The simulation results are in agreement with those of the wave model.     

上高县紫皮大蒜种植气候适宜性区划

基于紫皮大蒜生长周期和当地农业气象条件,得到上高县紫皮大蒜气候适宜性指标：10—11月的最低气温、10月至次年4月的平均气温和平均降水量以及2—4月的累计日照时数。利用1970—2020年宜春市和新余市辖区内共12个地面观测站的气象资料,采用GIS建立上高县紫皮大蒜种植区划因子地理空间分析模型。依据分区等级指标,将上高县划分为最适宜、一般适宜和不适宜3个紫皮大蒜气候种植区。     

海浪预报产品数据库管理系统开发研究

本文介绍海浪预报产品数据库管理系统，包括数据库管理系统的总体设计，硬软件的配置，数据库管理系统的主要内容和解决的关键技术。该数据库管理系统的建成，提供了我国近海和西北太平洋海浪预报的系统性资料，不仅对提高海浪预报准确率提供基础资料，也给海浪中长期预测预报方法研究和区域海洋学研究带来极大帮助。     

川滇地区强余震的震级分布和距离分布特征

研究了川滇地区1966年以来12次主震震级MSge;6.5的地震序列中,主震与强余震（本文定义为所有MSge;5的余震）震级差分布特征和强余震与主震距离的分布特征. 结果表明,强余震与主震震级差服从截断的指数分布,据此推导出了强余震与主震震级差的概率密度函数; 强余震距离分布的优势范围是距主震10——39 km,且强余震与主震震中的距离服从正态分布.      

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.