Transparent boundary condition for simulating nonlinear water waves by a particle method

Open boundaries are important when simulating water waves. In this study, a transparent boundary condition at an open boundary was developed for simulating nonlinear water waves propagating to a distant area using the Moving Particle Semi-implicit method. The novelty of this study is that the technique of wave analysis used in the experiment was introduced into the particle simulation to absorb incident waves; the simulation cost was reduced by employing inflow and outflow regions instead of a long dissipation region. Incident waves in front of the boundary were evaluated using Fourier analysis, and the particles on the transparent boundary were forced to move at the velocity of the analytical solution for Stokes waves in order to absorb the incident waves. The analysis was restricted to periodic waves. Wave propagation was simulated for two wave periods using the developed transparent boundary condition. The results showed that this transparent boundary transmitted the incident waves with small reflection and the simulation cost was lower than that for wave damping by a conventional highly viscous region.     

Comparative analysis of measurements of stratospheric aerosol by lidar and aerosol sonde above Ny-Ålesund in the winter of 1995 [Comparative analysis of lidar and OPC observations]

Solid polar stratospheric cloud (PSC) layers observed by lidar and a balloon-borne optical particle counter (OPC) on 17 December 1995 are reexamined in a comparative analysis framework. The typical radius of solid particles in the observed PSC is determined through the comparative analysis to have been approximately 2.3 μm. A backward trajectory analysis for the air mass in which the solid particles were observed shows that the air mass had experienced temperatures 2–3 K below the frost point of nitric acid tri-hydrate (NAT) during the 4 days preceding the observations. The back-trajectory analysis traces the air mass back to northern Greenland and Ellesmere Island on 16 December, one day before the observations. A microphysical box model is used to investigate possible mechanisms of formation for the observed solid particles. The results of this model suggest that the solid particles formed under mesoscale temperature fluctuations associated with mountain lee wave activity induced by the relatively high terrestrial elevations of northern Greenland and Ellesmere Island.     

Field measurement and modeling of near-bed sediment transport processes with fluid mud layer in Tokyo Bay

Tokyo Bay is one of the estuaries in Japan with a high population of almost 26 million people in the basin area. One of the major concerns for the environment in this water area is the decreasing ecosystem functions including the deterioration of water and sediment qualities caused by various anthropogenic activities. Since the bottom sediments around almost the entire area of the inner bay consist of fine materials with a high organic content, which cause the deterioration of water quality through processes such as hypoxia, an understanding of the fine sediment dynamics in the Bay is crucial for an environmental assessment of the water area. This paper proposes a model for the key processes of fine sediment dynamics, which reflects field data about muddy bed structures and their dynamics obtained during the monitoring campaign in 2007. One of the specific features of the sediment in the Bay at present is the persistent existence of fluid mud layers (water content over 300 %) with a thickness of around a few decimeters, which might be caused by deposition of abundant organic particles due to eutrophication. The present study shows that diffusion flux model delivers quite reliable results for estimating erosion flux from the top of fluid mud layers after calibrating the model parameter against the time series data of vertical flux measured by an acoustic Doppler velocimeter system. This study also derives analytical solutions, based on the Bingham fluid concept, of advection flux in the fluid mud layer on which external shear stress force is applied.

     

Dynamical interpretation of the very hot region appearing at the top of the loop

In order to explain the appearance of a hard X-ray source at the top of a loop, we present a model in which the dynamical effects of the dark filament mass infallng along the loop in association with the “disparition brusque” plays an important role. The crash of the infalling mass produces high temperature regions in the low corona above the two footpoints of the loop, and the up-going shocks, created in the crash and strengthened in propagating upwards along the steep density gradient in the tail of the infalling mass, produce a very high temperature (10⁸ K) region upon colliding with each other near the top of the loop. Successive occurrence of this process in successively higher loops in magnetic arcade may account for the sources of gradual hard X-ray bursts appearing at the top of the loop-like structure.     

An acoustic positioning system using demodulated signals of an FM ultrasonic wave

An acoustic positioning system using a continuous frequency-modulated (FM) ultrasonic wave transmitted from a sound source source located on the sea bottom is described in this paper. This system consists of a direction detecting system and a distance-change detecting system. The accuracy of the direction detection of the tested system was2degand the accuracy of the distance-change detection was within 0.10 m for a displacement of 50 m. Combining these two systems, it is possible to detect the change of position of the vessel sensitively. Since information from the phases of demodulated signals of the received FM ultrasonic wave is used exclusively, this system is excellent in signal-to-noise ratio (S/N) in spite of the simplicity of the electronic circuit. It was confirmed in experiments in the sea that both the direction detecting system and the distance-change detecting system worked well simultaneously, and that the combined systems would be suitable as an acoustic positioning system.     

Polarization of the Crab Nebula with disordered magnetic components

In this paper, we present an expanding disc model to derive the polarization properties of the Crab nebula. The distribution function of the plasma and the energy density of the magnetic field are prescribed as functions of the distance from the pulsar using the model derived by Kennel and Coroniti with  σ= 0.003  , where σ is the ratio of the Poynting flux to the kinetic energy flux in the bulk motion just before the termination shock. Unlike the case for previous models, we introduce a disordered magnetic field, which is parametrized by the fractional energy density of the disordered component. The flow dynamics are not solved, and the mean field is toroidal.
The averaged degree of polarization over the disc is obtained as a function of the inclination angle and fractional energy density of the disordered magnetic field. It is found for the Crab Nebula that the disordered component contains about 60 per cent of the magnetic field energy. This value is supported by the facts that the disc appears not as 'lip-shaped' but as 'rings' in the observed intensity map, and that the highest degree of polarization of ∼40 per cent is reproduced for rings, which is consistent with the observations.
We suggest that, because the disordered field contributes to the pressure rather than to the tension, the pinch force may have been overestimated in previous relativistic magnetohydrodynamic simulations. The disruption of the oppositely directed magnetic fields, which is proposed by Lyuvarsky, may actually take place. The relativistic flow speed, which is indicated by the front–back contrast, can be detected in the asymmetry of distributions of the position angle and depolarization.     

Behavior of zircon in the upper-amphibolite to granulite facies schist/migmatite transition, Ryoke metamorphic belt, SW Japan: constraints from the melt inclusions in zircon

Behavior of zircon at the schist/migmatite transition is investigated. Syn-metamorphic overgrowth is rare in zircon in schists, whereas zircon in migmatites has rims with low Th/U that give 90.3 ± 2.2 Ma U–Pb concordia age. Between inherited core and the metamorphic rim, a thin, dark-CL annulus containing melt inclusion is commonly developed, suggesting that it formed contemporaneous with the rim in the presence of melt. In diatexites, the annulus is further truncated by the brighter-CL overgrowth, suggesting the resorption and regrowth of the zircon after near-peak metamorphism. Part of the zircon rim crystallized during the solidification of the melt in migmatites. Preservation of angular-shaped inherited core of 5–10 μm in zircon included in garnet suggests that zircon of this size did not experience resorption but developed overgrowths during near-peak metamorphism. The Ostwald ripening process consuming zircon less than 5–10 μm is required to form new overgrowths. Curved crystal size distribution pattern for fine-grained zircons in a diatexite sample may indicate the contribution of this process. Zircon less than 20 μm is confirmed to be an important sink of Zr in metatexites, and ca. 35-μm zircon without detrital core are common in diatexites, supporting new nucleation of zircon in migmatites. In the Ryoke metamorphic belt at the Aoyama area, monazite from migmatites records the prograde growth age of 96.5 ± 1.9 Ma. Using the difference of growth timing of monazite and zircon, the duration of metamorphism higher than the amphibolite facies grade is estimated to be ca. 6 Myr.     

Analyses of age and population genetic structure of the broadbanded thornyhead Sebastolobus macrochir in North Japan suggest its broad dispersion and migration before settlement

Body size, age, and population genetic structure of the broadbanded thornyhead Sebastolobus macrochir inhabiting areas off the Pacific coast of Tohoku and off Abashiri, the Sea of Okhotsk, Japan, were analyzed. On the basis of significant differences in body size (growth) between certain year classes at Tohoku and Abashiri, it appears that S. macrochir does not migrate extensively after settlement and subsists on food within the settled environment. Meanwhile, no genetic isolation was observed between the populations at these two sites. Thus, it is highly likely that its pelagic egg balloons, larvae, and juveniles widely disperse and migrate before settlement.     

Rejuvenated extension of the Philippine Sea plate and its effect on subduction dynamics in the Nankai Trough

The Nankai Trough, Japan, is a subduction zone characterized by the recurrence of disastrous earthquakes and tsunamis. Slow earthquakes and associated tremor also occur intermittently and locally in the Nankai Trough and the causal relationship between slow earthquakes and large earthquakes is important to understanding subduction zone dynamics. The Nankai Trough off Muroto, Shikoku Island, near the southeast margin of the rupture segment of the 1946 Nankai earthquake, is one of three regions where slow earthquakes and tremor cluster in the Nankai Trough. On the Philippine Sea plate, the rifting of the central domain of the Shikoku Basin was aborted at ~15 Ma and underthrust the Nankai forearc off Muroto. Here, the Tosa-Bae seamount and other high-relief features, which are northern extension of the Kinan Seamount chain, have collided with and indented the forearc wedge. In this study, we analyzed seismic reflection profiles around the deformation front of accretionary wedge and stratigraphically correlated them to drilling sites off Muroto. Our results show that the previously aborted horst-and-graben structures, which were formed around the spreading center of the Shikoku Basin at ~15 Ma, were rejuvenated locally at ~6 Ma and more regionally at ~3.3 Ma and have remained active since. The reactivated normal faulting has enhanced seafloor roughness and appears to affect the locations of slow earthquakes and tremors. Rejuvenated normal faulting is not limited to areas near the Nankai Trough, and extends more than 200 km into the Shikoku Basin to the south. This extension might be due to extensional forces applied to the Philippine Sea plate, which appear to be driven by slab-pull in the Ryukyu and Philippine trenches along the western margin of the Philippine Sea plate.