某公路路基填土工程地质性质研究

盱眙地区软土成因复杂,矿物成分特殊,本文通过对其矿物成分、化学成分、颗粒分析、物理指标、膨胀性、压缩性等试验研究,对该软土的工程性质取得一些认识。结果认为该类软土中粘土矿物含量高、亲水性强,填土液塑限高、有机质含量高;在含水量高时碾压成饼状,含水量低时坚硬难以破碎,不能直接做路基填料,采用常规的掺灰处理效果不理想,是一种特殊性软土。     

一种网络RTK新技术——增强参考站

通过分析虚拟参考站技术和主辅站技术的不足,提出了一种新的网络RTK技术——增强参考站技术(ARS).分析了这种技术的原理并阐述了该技术中改正数的生成方法,同时,提出了一种基于RTCM编码的适合于该技术的改正数编码格式.在此基础上,分析了该技术的RTK定位精度、数据传输效率和系统可靠性,从理论上说明了增强参考站的技术优势.最后,以四川综合GPS服务网(SIGN)的子网数据对该技术进行了验证,结果表明,该技术具有高定位精度、高数据传输效率的特点,是一种理想的网络RTK技术.     

1:50 000松花江、嫩江干流条带图在黑龙江省防汛信息服务系统中的应用

论述了1:50 000松花江、嫩江干流条带图的数据格式转换、水利专题图层的设计和用JAVA语言编程调用电子地图数据的方法.     

一种改进的GPS随机模型建模方法

针对观测序列的异方差和时相关特性相互影响但又难以并行建模的问题,提出了一种迭代、序贯处理异方差和时相关问题的随机模型建模方案.实验结果显示,该方法较好地解决了异方差和时相关特性无法并行建模的难题.极大地消除了多路径及系统残余误差对GPS定位成果的影响,增加了基线数据处理的可靠性.     

人工神经网络在白云岩类型识别中的应用

利用地球化学数据,运用人工神经网络方法对美国密苏里州东南Ｂｏｎｎｅｔｅｒｒｅ组（寒武纪）滨海相的白云岩进行了分类、识别,判别率达１００％,结果表明,该方法性能良好,可望成为岩石分类、判别的有效手段。     

含矿预测的人工神经网络方法

运用神经网络模型的一典型模型——“反向传播”模型的改进形式,处理矿产资源统计预测问题,得出与数量化理论Ⅱ处理极为相似的结果.     

上海城市发展的环境问题及其对策研究

上海市的发展战略;空间布局模式和环境管理是文章讨论的三个主要问题。作者认为:(1)战略设想要立足于上海的发展,“开发浦东、振兴上海、服务全国、面向世界;”(2)新的空间布局模式应为“逐步形成新的CBD,强化和完善金融和服务功能”;(3)城市发展和环境建设要协调。文章着重讨论了上海城市发展中出现的环境问题及其治理的对策和措施。     

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.     

Geophysical methods applied to fault characterization and earthquake potential assessment in the Lower Tagus Valley, Portugal

The study region is located in the Lower Tagus Valley, central Portugal, and includes a large portion of the densely populated area of Lisbon. It is characterized by a moderate seismicity with a diffuse pattern, with historical earthquakes causing many casualties, serious damage and economic losses. Occurrence of earthquakes in the area indicates the presence of seismogenic structures at depth that are deficiently known due to a thick Cenozoic sedimentary cover. The hidden character of many of the faults in the Lower Tagus Valley requires the use of indirect methodologies for their study. This paper focuses on the application of high-resolution seismic reflection method for the detection of near-surface faulting on two major tectonic structures that are hidden under the recent alluvial cover of the Tagus Valley, and that have been recognized on deep oil-industry seismic reflection profiles and/or inferred from the surface geology. These are a WNW–ESE-trending fault zone located within the Lower Tagus Cenozoic basin, across the Tagus River estuary (Porto Alto fault), and a NNE–SSW-trending reverse fault zone that borders the Cenozoic Basin at the W (Vila Franca de Xira–Lisbon fault). Vertical electrical soundings were also acquired over the seismic profiles and the refraction interpretation of the reflection data was carried out. According to the interpretation of the collected data, a complex fault pattern disrupts the near surface (first 400 m) at Porto Alto, affecting the Upper Neogene and (at least for one fault) the Quaternary, with a normal offset component. The consistency with the previous oil-industry profiles interpretation supports the location and geometry of this fault zone. Concerning the second structure, two major faults were detected north of Vila Franca de Xira, supporting the extension of the Vila Franca de Xira–Lisbon fault zone northwards. One of these faults presents a reverse geometry apparently displacing Holocene alluvium. Vertical offsets of the Holocene sediments detected in the studied geophysical data of Porto Alto and Vila Franca de Xira–Lisbon faults imply minimum slip rates of 0.15–0.30 mm/year, three times larger than previously inferred for active faults in the Lower Tagus Valley and maximum estimates of average return periods of 2000–5000 years for M 6.5–7 co-seismic ruptures.     

Modeling the seismic response of basin-edge structure by a sequential waveform method

A sequential waveform method is developed to simulate the seismic response of basin-edge structure excited by a plane incident P-wave. The full procedure involves: (a) a previous parameterization of the investigated model using the seismic wave velocities and depths of the sedimentary stratifications; (b) an input motion determined from the records at stations installed on hard rock; (c) forward computation of the P-SV elastic wave field by means of a two-dimensional finite difference (FD) method; (d) the optimization of the model vector using simulated annealing technique and comparing the simulated seismic response of the tested structure with the observed wave field; (e) the correction of the initial model by trial-and-error by testing the differences between synthetics and observed data, and (f) the final solution obtained by iteration using the conjugate gradient algorithm. The search of an optimal basin-edge model has been parallel processed by varying the shapes and velocities of strata on the basis of the fitting of relative timing, amplitude and phase between the output and the observed data. The input motion and sensitivity have been checked and the validity of the method has been demonstrated by numeric analysis. Using the teleseismic records generated by 7 earthquakes recorded at 26 broadband seismic stations, we have studied the seismic velocity structure of the southern edge of the Jiyang depression located in the Bohai Bay basin, northern China. Two cross sections show an agreement between the velocity results and the geological sections available in the region. In addition, we obtain evidence of three hidden faults under the sections and features that suggest major extensions at the Paleogene.