LED光色对欧洲舌齿鲈幼鱼抗氧化能力和消化能力的影响

作者利用循环水养殖实验系统,研究了红、绿、白、黄、蓝5种光色对欧洲舌齿鲈(Dicentrarchus labrax)幼鱼抗氧化能力和消化能力的影响。结果表明,红光组的欧洲舌齿鲈幼鱼超氧化物歧化酶(SOD)活力显著高于其他光色组(P0.05),而绿、白、黄和蓝光色组的SOD活力没有显著性差异;红光组的还原型谷胱甘肽(GSH)含量显著高于其他光色组(P0.05),绿、白光组与黄、蓝光组的GSH含量之间有显著性差异(P0.05);红光组过氧化氢酶(CAT)活力显著高于其他光色组(P0.05),白光组的CAT活力显著低于其他光色组(P0.05)。黄光组的胃蛋白酶活力显著高于红、绿、白光组(P0.05),绿光组的胃蛋白酶活力显著低于其他光色组(P0.05);红、绿、蓝光组的淀粉酶活力要显著高于白、黄光组(P0.05),红、绿、蓝光组的淀粉酶活力没有显著性差异,黄、白光组的淀粉酶活力没有显著性差异;白光组纤维素酶活力显著高于其他光色组(P0.05),绿光组的纤维素酶活力显著高于红、蓝光组(P0.05),黄光组的纤维素酶活力和绿、红、蓝光组没有显著性差异。因此,欧洲舌齿鲈在红光下养殖,其体内的抗氧化能力强,能有效应对氧化应激,而在黄光或红光下养殖其消化能力更强。     

耐压柱壳参数化设计与灵敏度分析

为提高耐压柱壳设计效率,设计了耐压柱壳参数化分析流程。研究了有限元分析所涉及的材料属性、载荷施加、边界条件设置等内容,确定了采用弧长法分析耐压柱壳稳定性。利用Python语言对于ABAQUS软件进行了二次开发,利用Isight软件实现了ABAQUS的集成,实现了耐压柱壳有限元分析模型的网格自动划分、自动分析计算等。选择样本点进行参数化分析,利用响应面模型对于样本点进行了拟合,得到了具有较高拟合精度、满足工程需要的近似模型,进行了设计变量的灵敏度分析。研究结果表明:参数化分析流程可实现耐压柱壳的自动分析、近似模型及灵敏度分析,可降低耐压柱壳分析难度,均可提高耐压柱壳设计效率。     

中国东海陆架海域柱状沉积物对磷的吸附行为

通过研究磷在海洋柱状沉积物上的吸附动力学曲线和吸附等温线,并结合沉积物表面电荷性质以及磷形态分析,考察了我国东部陆架海域沉积物对磷的吸附特征。结果表明,所研究海域沉积物对磷的吸附过程明显分为快慢两段,48h后吸附可达到平衡;吸附后的磷主要为可交换态磷,吸附过程以物理作用为主;吸附等温线可用Langmuir交叉型模式描述,在磷初始浓度较低时,沉积物对磷存在解吸现象;沉积物对磷吸附参数的垂直分布较为复杂,受自身性质影响较大;盐度增大,沉积物对磷的吸附能力呈下降趋势。     

PDR算法对地磁室内定位精度的提升研究

利用建筑物中金属结构引起的地磁场扰动可以对室内的行人目标进行定位,而且基于地磁场的定位无需布设任何额外设施,因此可以以低成本实现定位。但仅靠单一的地磁技术无法满足室内定位的精度要求。为了解决磁场数据中单点定位的模糊性问题,本文提出了一种利用粒子滤波算法将PDR与地磁相融合的室内定位方法,并开发了地磁室内导航系统,以智能手机为硬件平台构建磁力计传感器模型,建立匹配轨迹的均方误差准则并实现PDR累积误差实时校正的迭代计算。在68 m×1.8 m的试验区域内,产生的平均定位误差为1.13 m,最大定位误差为2.17 m。本文算法的定位精度比单独PDR算法提升了42%;与单一地磁指纹匹配算法相比,定位精度提高了57%。试验证明,本文提出的融合算法对提高室内定位精度具有显著的作用。     

An improved building detection approach using L-band POLSAR two-dimensional time-frequency decomposition over oriented built-up areas

The objective of this study is to efficiently extract detailed information about various man-made targets in oriented built-up areas using polarimetric synthetic aperture radar (POLSAR) images. This paper develops an improved approach for building detection by utilizing Two-Dimensional Time-Frequency (2-D TF) decomposition. This method performs outstandingly in distinguishing between man-made and natural targets based on the isotropic behaviors, frequency-sensitive responses, and scattering mechanisms of objects. The proposed method can preserve the spatial resolution and exploit the advantages of TF decomposition; specifically, the exact outlines of buildings can be effectively located, and more types of features (e.g., flat roofs, roads, and walls that are oblique to the radar illumination) can be distinguished from forests in complex built-up areas by 2-D TF decomposition. The coarser-resolution subaperture images that are produced in the azimuth direction, which correspond to different looking angles, are beneficial for detecting man-made structures with main scattering centers oriented at oblique angles with respect to the radar illumination. In the range direction, the obtained subaperture images, which correspond to various observation frequencies, can be helpful in distinguishing flat roofs and roads from forests. This method was successfully implemented to analyze both NASA/JPL L-band AIRSAR and L-band EMISAR data sets. The building detection results of the proposed method exhibit a significant improvement over those of other methods and reach an overall accuracy over 80%, with approximately 20% higher than the accuracies of K-means clustering and the entropy/alpha-Wishart classifier and approximately 10% higher than the accuracy of the support vector machine method. Moreover, building details can be precisely detected, obliquely oriented buildings can be identified, and the distinction between buildings and forests is significantly improved, as both visually and statistically indicated. This method is highly adaptable and has substantial application value.     

球面距离计算方法及精度比较

球面距离(角间距)计算是天文或地理学中极常用的计算之一,也是目标查找、锥形检索、交叉证认等方法的基础。数学上,通过球面几何可以直接计算出两点的距离,前人已经推导出了多个复杂程度不一的计算方法。但是由于计算机的精度有限,在进行数值计算时有舍入误差,导致公式计算结果出现偏差。对几个常用的球面距离计算公式进行了考察,测试并对比它们在不同计算环境下的精度与优缺点。此外还展示并比较了几种常用天文软件包、数据库的球面距离计算方法,以期有助于天文工作者选择适合自己当前需要的计算方法。     

New photometric investigation of the low-mass-ratio contact binary star V1853 Orionis

Four-color charge-coupled device(CCD) light curves in the B, V, Rc and I c bands of the totaleclipsing binary system V1853 Orionis(V1853 Ori) are presented. By comparing our light curves with those published by previous investigators, it is determined that the O'Connell effect on the light curves has disappeared. By analyzing those multi-color light curves with the Wilson-Devinney code(W-D code),it is discovered that V1853 Ori is an A-type intermediate-contact binary with a degree of contact factor of f = 33.3%(3.7%) and a mass ratio of q = 0.1896(0.0013). Combining our 10 newly determined times of light minima together with others published in the literature, the period changes of the system are investigated. We found that the general trend of the observed minus calculated(O-C) curve shows a downward parabolic variation that corresponds to a long-term decrease in the orbital period with a rate of d P/dt =-1.96(0.46)×10^-7 d yr^-1. The long-term period decrease could be explained by mass transfer from the more-massive component to the less-massive one. By combining our photometric solutions with data from Gaia DR_2, absolute parameters were derived as M_1 = 1.20 M⊙, M_2 = 0.23 M⊙, R_1 = 1.36 R⊙and R_2 = 0.66 R⊙. The long-term period decrease and intermediate-contact configuration suggest that V1853 Ori will evolve into a high fill-out overcontact binary.     

A PCA approach to stellar abundances I. testing of the method validity

The derivation of element abundances of stars is a key step in detailed spectroscopic analysis. A spectroscopic method may suffer from errors associated with model simplifications. We have developed a new method of deriving the various element abundances of stars based on the calibration established from a group of standard stars. We perform principal component analysis(PCA) on a homogeneous library of stellar spectra, and then use machine learning to calibrate the relationship between principal components and element abundances. By testing with spectral libraries S4 N and MILES, we find that our procedure provides good consistency when spectra from a homogeneous set of observations are used, and it could be expanded to stars with quite a wide range of stellar parameters, with both dwarfs and giants. Moreover, we discuss the four key factors that have a significant impact on the results of derived element abundances,including the resolution of the spectra, wavelength range, the signal-to-noise ratio(S/N) of spectra and the number of principal components adopted.     

X-ray activity from different types of stars

X-ray emission is an important indicator of stellar activity. In this paper, we study stellar Xray activity using the XMM-Newton and LAMOST data for different types of stars. We provide a sample including 1259 X-ray-emitting stars, of which 1090 have accurate stellar parameter estimations. Our sample size is much larger than those used in previous works. We find a bimodal distribution of the X-ray to optical flux ratio(log(fX/fV)) for G and K stars. We interpret that this bimodality is due to two subpopulations with different coronal heating rates. Furthermore, using the full widths at half maxima calculated from Hα and Hβ lines, we show that these stars in the inactive peaks have smaller rotational velocities. This is consistent with the magnetic dynamo theory that presumes stars with low rotational velocities have low levels of stellar activity. We also examine the correlation between log(fX/fV) and luminosity of the excess emission in the Hα line, and find a tight relation between the coronal and chromospheric activity indicators.     

航行体近水面滑跳运动试验研究

航行体近水面滑跳运动是近年来跨介质航行体研究的热点问题之一,针对航行体水面滑跳运动现象开展研究。 首先设计了适宜滑跳的航行体构型,通过数值仿真方法确定航行体的主要技术参数,发现航行体滑跳过程对于重心位置非常敏感;然后,针对设计的构型,开展水面自由滑跳试验,试验表明本文设计的模型可以在近水面稳定滑跳,验证了滑跳运动方式的可行性。 工作可为后续跨介质航行体设计提供技术参考。