岷江上游干扰岸坡主要表生地质灾害分布特征及成因浅析

岷江上游地处我国著名的南北向地震带的中段，因其特定的地质环境导致区内表生地质灾害极为严重。通过对岷江上游（汶川以上）河段的崩塌、滑坡、泥石流等表生地质灾害的调查研究，其分布沿岷江两岸具有明显的分段特征与河谷地貌分段基本一致，它们形成发展与特定地形地貌、易崩滑或软弱地层、特殊的构造部位、降雨等密切相关。     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

Parameter identification of inelastic structures under dynamic loads

The generalized model of differential hysteresis contains 13 control parameters with which it can curve‐fit practically any hysteretic trace. Three identification algorithms are developed to estimate the control parameters of hysteresis for different classes of inelastic structures. These algorithms are based upon the simplex, extended Kalman filter, and generalized reduced gradient methods. Novel techniques such as global search and internal constraints are incorporated to facilitate convergence and stability. Effectiveness of the devised algorithms is demonstrated through simulations of two inelastic systems with both pinching and degradation characteristics in their hysteretic traces. Owing to very modest computing requirements, these identification algorithms may become acceptable as a design tool for mapping the hysteretic traces of inelastic structures. Copyright © 2002 John Wiley & Sons, Ltd.     

Probabilistic analysis of peak response of MDOF systems with uncertain PSD function

The use of uniform hazard spectra which have the same probability of exceedance at different frequencies has been proposed for the future version of the National Building Code of Canada. Commonly used combination rules to estimate the peak responses of multi‐degree‐of‐freedom (MDOF) systems are the square root of sum of squares rule and the complete quadratic combination rule. However, the probability that the peak response of a MDOF system exceeds the one estimated by using these rules with the peak modal responses from the uniform hazard spectra cannot be inferred directly. The assessment of the probability of exceedance of the peak response of MDOF systems is presented by considering that the uncertainty in seismic excitation due to all potential earthquakes can be lumped in the power spectral density function of the ground acceleration with uncertain model parameters. This probability is evaluated based on the random vibration of linear systems and the first‐order reliability method. It is found that the under‐ or over‐estimations are less than about 5 or 10% if the modal contributions are not within 10–90% of, or not within 20–80% of, the absolute sum of the effective modal peak responses, respectively. Otherwise, severe under‐ or over‐estimation could result. Copyright © 2002 John Wiley & Sons, Ltd.     

东昆仑东段中更新世以来的成山作用及其动力转换

对东昆仑造山带东段第四纪构造及与地貌关系的分析表明，现代山盆相间的地貌格局成型于中更新世，且在中更新世以来发生了多次构造变形体制的转换。根据布青山北部查干额热格地区第四系剖面的构造、地层时代及地层与构造关系的分析表明，中更新世时期为伸展构造体制，昆仑山内部开始发生了差异隆升，布青山开始崛起。中更新世末应力体制发生急剧变化，由伸展体制转为收缩事件，又急速转为伸展构造体系，短暂的收缩事件造成了中更新世冲洪积层的褶皱，随后的伸展则导致了影响深刻的向北依次断落的阶地状正断层系统。晚更新世应力体系再度发生重大转换，伸展正断层体系被左旋走滑运动体系所代替，并一直延续至今。中更新世以来多次隆升构造变形体制的转换说明东昆仑地区的成山过程受控于多种动力背景，而非单一的挤压抬升。隆升构造变形体系的确定及其时代约束为深入刻划青藏高原东北缘隆升作用的动力过程提供了重要信息。     

离散裂隙渗流方法与裂隙化渗透介质建模

流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。     

X射线衍射峰五基本要素的物理学意义与应用

本文根据Bragg衍射方程、Scherrer方程、衍射强度计算原理，研究讨论了X射线衍射5构成要素中的衍射峰位置、衍射峰宽度、衍射峰高度的物理学意义。根据实验研究证明了衍射峰不对称性的几何条件特征，并用地质事实验证了衍射形态变化与晶格应变和粒度大小的内在联系。从而阐明了单个衍射峰5基本构成要素的完整物理学意义，并以实例论证了5要素的实际应用价值。     

含油玄武岩中绿泥石的形成温度

以苏北盆地高邮凹陷闵桥地区含油玄武岩中的绿泥石为研究对象，探讨了其成因和形成温度，认为玄武岩中绿泥石有两种形成方式、五条形成途径：其一为蚀变演化，包括：火山玻璃、斜长石、辉石的蚀变，交代橄榄石斑晶，以及皂石的进一步演化；其二为沉淀结晶，包括从热液中直接沉淀生长和胶体溶液充填后的结晶。计算结果显示，蚀变演化形成的绿泥石，其形成温度为128－271℃；沉淀结晶形成的绿泥石，其形成温度为31－63℃。玄武岩中绿泥石形成温度与埋藏深度间没有明显的线性相关。进一步研究表明，本区玄武岩作为储油层，其进油时的温度为62－118℃，不超出48－137℃。     

微波作用下化学助剂在细粉煤脱水中的应用研究

探讨了在微波加热条件下加入表面活性剂和溶剂油等有机溶剂对脱水效果的影响，力求找出其中的脱水规律。结果表明：微波脱水效果明显，同时，表面活性剂能够大大降低滤饼含湿量，而且非离子表面活性剂的效果比阳离子、阴离子好，柴油也能促进粉煤的脱水。     

攀西地区独立银矿的成矿地质条件及找矿前景

四川攀西地区具有特定的地质条件，区域地球化学特征、有利的成矿环境和已发现的银矿床点，都证明区内具有很好的成矿地质条件，寻找大型独立银矿很有前景。主攻内生型和沉积变质型银矿床是今后工作的重点。