地球物理非线性反演模拟退火法的改进

在地球物理非线性反演方法中，模拟退火法是一种较先进的启发式蒙特卡洛（ＭｏｎｔｅＣａｒｌｏ）方法．但是，在处理实际资料时，该方法存在着计算效率不够高的缺点，有时还会失效．为此，从模拟退少法的关键问题──最低温度的选择入手，根据模拟退火法与统计力学的吉布斯－马尔柯夫（Ｇｉｂｂｓ－Ｍａｒｋｏｖ）模型之间的关系导出临界温度的近似表达式；用此式分析目标函数超曲面形状对模拟退火法计算的影响；提出利用模糊先验信息确定最低温度、改造目标函数等改进措施．     

THE MEASUREMENT ON VISCOSITY Q VALUE USINGP-WAVE OF LOCAL EARTHQUAKESIN WESTERN YUNNAN PROVINCE 滇西地区近震(?)波的粘性 Q_α值测定

本文使用云南滇西地区、红河断裂带北段1984——1985年由PDR-2数字事件记录仪记录到的84张地震记录图,按文献〔4〕中所述的理论和方法,用直达(?)波资料计算了该区的分区粘性多Q_α值,初步结论是:整个场区内介质粘弹性可用非线性体去近似模拟。Q_α值分布情况为:由云龙、洱源、漾濞三点所成的三角区内,其值约为50±30左右较低,而沿弥渡向北,经下关至剑川所示的整个断裂带上所测Q_α值较高,约在160±30左右。反映了明显的构造差异性。     

基于声学全波形反演的油气藏地震成像方法

岩性油气藏在我国天然气勘探开发中占有非常重要的位置,其分布区域的成像是合理布设井位,提高钻井成功率的关键之一.本文首先基于地下介质的声学近似和波场回传理论,利用频率域单程声波方程延拓计算地震波场,进行全波形反演,获得地层密度和体积模量的定量成像,并依据油气藏物性特征和流体饱和多孔介质岩石物理模型,简要讨论了孔隙度和饱和度与密度及体积模量的关系,明确了地震油气藏成像新概念.在此基础上,定义了基于流体体积模量和孔隙度的成像函数,进行油气藏成像.理论模型计算表明该方法是可行的.通过对西部地区某气田二维地震数据处理,实现了致密砂岩气藏成像,钻井结果证实了气藏区域成像位置的准确性和方法的有效性.     

用Rayleigh面波方位各向异性研究中国大陆岩石圈形变特征

中国大陆地质构造历史非常复杂,岩石圈长期积累的形变较大,而利用地震面波传播的各向异性是研究岩石圈形变特征的强有力手段. 本文利用双台窄带通滤波-互相关方法与基于图像分析的相速度频散曲线提取技术,提取Rayleigh面波相速度频散资料,进而反演中国大陆及邻区20～120 s周期Rayleigh面波相速度方位各向异性空间分布图像. 检测板测试结果显示：中国大陆大部分区域的方位各向异性横向分辨率在5°左右. 各向异性研究结果表明：中国大陆地壳上地幔方位各向异性特征存在显著的空间差异,反映出形变特征的空间差异;104°E以东地区地壳上地幔各向异性弱于西部地区,表明其构造变形总体弱于西部地区. 青藏地块及其东缘地区地壳与上地幔顶部变形最为强烈. 但东部的局部地区如华南地块与珠江口地区、鄂尔多斯盆地西南缘以及秦岭-大别造山带,较强的各向异性显示这些区域在不同时期也经历了强变形. 青藏地块内中短周期快波方向自西向东顺时针旋转变化可能指示板块碰撞与挤压过程中软弱物质的流变方向. 青藏地块西部中下地壳和上地幔形变模式相似,可能处于壳幔耦合状态;而中东部及东缘地区地壳上地幔形变模式存在明显差异,壳幔似乎不具备垂直连贯的形变特征. 位于青藏地块北部的塔里木盆地、柴达木盆地以及祁连褶皱带同样经历了强变形. 包括四川盆地在内的上扬子地块快波方向的变化显示中地壳与下地壳上地幔形变模式不同,而形变特征一致的下地壳与上地幔应为强耦合. 大约以103°E为界,龙门山断裂带可分为南西段和北东段,南西段处于低速区,而北东段位于高速区,且方位各向异性强度明显大于南西段;2008年5月12日汶川M_S8.0级地震沿断裂带的单侧破裂模式除与北东段的高应力积累有关外,还可能与北东段地下介质物性存在密切关系,高速坚硬岩体的发育有利于应变能的积累与集中释放.     

基于GPRS的多频激电仪远程测控系统

针对多频激电仪中接收机对发送机和控制器无法进行智能远程控制的现状,开发了一套基于GPRS的多频激电仪远程测控系统.该系统由通信模块、上位机和下位机组成.通信模块由3块插入SIM卡的DTU组成,它通过短信方式完成远程数据传输功能,实现上位机和下位机之间的数据通信.上位机作为本系统的主动站,负责发起连接,对下位机进行状态监测和功能控制.下位机作为从动站,等待上位机的连接,并执行上位机的各种控制命令,在发生紧急事件的时候能主动向上位机报警.3个模块在该系统中相互协调,共同完成系统的各项功能.试验表明,该控制系统能够正常工作,在野外工作时能降低劳动强度,提高工作效率.     

利用标准时频变换方法在强噪声环境下无偏拾取地震P波、S波到时

地震P波、S波到时是精确分析地震水平位置、深度与速度结构等的重要参数,如何准确拾取P波和S波到时是地震学的一项重要的基础工作.大数据量与强噪声环境给地震到时的自动拾取带来了很大挑战.在频率域中可将信号与噪声分离,但会造成震相的偏移.针对上述问题,本文在STA/LTA、AIC方法的基础上,引入了标准时频变换（Normal Time-Frequency Transform,NTFT）,结合信号时间域与频率域特征,提出了基于NTFT的STA/LTA方法,以及基于NTFT的AIC方法来拾取P波和S波的到时.基于NTFT的STA/LTA方法通过构建即时频率约束的特征函数,以增强地震信号振幅响应的变化特征.基于NTFT的AIC方法则根据NTFT的变换系数定位即时频率-时间基准点,通过滑动窗口直接对标准时频谱进行AIC处理拾取最佳到时.本文采用了不同强度噪声的60组合成数据和105组实测地震数据对方法的可靠性进行检验.以人工拾取到时为参考,实测数据中NTFT-STA/LTA方法拾取P波、S波到时的均方根误差分别为0.36 s和0.56 s;NTFT-AIC方法拾取P波、S波到时的均方根误差分别为0.25 s和0.35 s.相比于STA/LTA、AIC方法,NTFT改进后的方法提高了P波和S波到时的拾取准确率,为强噪声环境下的地震波形到时拾取提供了新思路.

     

16排螺旋CT智能跟踪技术在下肢动脉CTA中的应用

目的探讨16排螺旋CT造影剂跟踪技术在下肢动脉CTA造影中的应用价值。方法对53例采用跟踪技术组病例与46例未采用跟踪技术组病例的下肢动脉CTA图像效果进行对照分析。结果采用跟踪技术的下肢动脉CTA的造影成功率及图像质量优于未采用跟踪技术组。结论下肢动脉CTA常规采用智能跟踪技术可提高CT成像的成功率及图像质量,利于下肢动脉病变的诊断。     

Relationships between δ18O in summer precipitation and temperature and moisture trajectories at Muztagata, western China

Based on summer observations of stable isotope of precipitation at Muztagata, western China, during 2002―2003, this paper presents the relationship between δ18O in precipitation and air temperature, and discusses the effect of moisture transport on δ18O in precipitation. Results show that air temperature correlates positively with δ18O in precipitation, and the temperature effect controls the δ18O of precipitation in this area. The Muztagata region exhibits high δ18O values in summer precipitation, similar to those shown at stations in adjacent regions. According to the results of our model set up to trace the moisture trajectories, the westerlies and local moisture circulation contribute to variations of oxygen isotopes in precipitation. In addition, the impacts of the moisture transport distance, the moisture transport level, and the incursion of the polar air mass also influence the variations of δ18O in precipitation. The moisture origins and transport mechanisms also contribute to the variation of δ18O in precipitation at Muztagata.     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

苏北大陆科学钻探靶区重磁异常反演解释

对江苏东海县毛北地区重、磁观测异常进行了处理和特征分析,并根据科学钻探主要目标体榴辉岩与其围岩有达0.9×103kg/m3的明显密度差,进行了等效密度反演成像与综合地震约束反演计算.给出了该地区重力异常模型,可作为综合地质与地球物理研究的一个基础.