基于SBAS-InSAR技术的中巴公路(公格尔墓士塔格段)地质体缓慢变形识别研究

中巴公路沿线地质灾害多发,通过微小变形对于其沿线地质灾害进行早期识别是一种重要的防灾措施。本文以中巴公路公格尔山至墓士塔格山段为研究区,选用2007年7月12日至2011年1月20日获取的16景PALSAR合成孔径雷达数据,采用小基线集干涉测量技术(SBAS-InSAR,Small Baseline Subset Interferometric Synthetic Aperture Radar)进行了变形干涉计算,识别并分析了沿线地质体的变形情况:(1)冰川运动与冰川泥石流作为沿线最主要的地质灾害,变形相对较大,较易识别,有效PS点主要分布在前缘冰碛物部分,反映为正负大变形相间的高异常值点团,其中公格尔山与墓士塔格山山麓的冰碛物运动最为显著; (2)沿线较软弱顺坡结构岩体发育,且风化严重,稳定性较差,易形成溜石坡灾害,表现为顺坡负异常变形; (3)宽谷区PS点变形以正值和较小的负值为主,该区域主要为底部冰水堆积物,上部洪积物,冰川融水补给充足,土体水分含量较高,可能产生冻胀变形,同时也可能存在斜坡重力梯度方向的变形,二者变形合成在测量结果上表现为视线向的正异常; (4)中巴公路主要在湖盆和洪积扇上展布,推测由于不均匀分布软土的变形,使较为刚性的公路部分路段产生了下沉; (5)SBAS-InSAR的高精度变形观测覆盖范围广,对于线性工程周围地质体稳定性的识别具有很好的应用前景。     

温度控制下的煤层气储层物性动态演化研究

为研究热对煤储层的改造作用,采用不同煤级具有代表性的12件煤样。考虑煤级差异、温度作用差异以及核磁共振(NMR)在研究孔隙流体中的技术优势等,对煤样进行了显微组分、镜质体反射率、孔渗测试以及孔隙结构的压汞和NMR实验,研究了煤储层核磁共振特征、T2谱响应特征、孔径分布、核磁共振孔隙度及核磁渗透率、可动流体等,同时对比了不同变质程度煤储层孔隙结构特征及其对煤层气储层物性的控制作用。温度变化下的煤储层物性研究结果表明:热的作用对各煤级煤储层孔隙度都有改善作用,但是对低煤级影响最大,其次为中煤级,最后为高煤级煤储层。温度对不同煤级煤岩的渗透性影响迥异。高挥发份烟煤受热后渗透率增加了一个数量级。低挥发份烟煤受热后渗透率则下降了一个数量级,这应与煤岩热膨胀性有关。无烟煤渗透率总体变化不明显,说明热作用对高煤级煤储层改造意义不大。     

三维数值模拟在地下工程围岩二次应力-形变场研究中的应用

地下工程开挖时常出现围岩稳定性问题[1],而研究围岩稳定性问题的关键之一是围岩开挖后的二次应力-形变场研究.由于受诸多不确定因素的影响,对此问题的认识和研究面临一定难题.工程实践证明,借助三维数值模拟方法来研究这一问题具有较好效果.     

中资企业在澳大利亚矿业投资总体形势与前景

介绍了澳大利亚的自然条件、矿业开发条件、矿业开发存在的问题、矿业投资现状等,在此基础上对在澳大利亚进行矿业开发的主要风险进行了分析,并对在澳矿业开发投资的有关方面提出了建议。认为当代中国投资者只有在认清当前形势,理清投资思路、优化投资策略的前提下,才能在激烈的国际矿业投资竞争中取得优势,并树立中国企业在世界经济舞台上的崭新形象。     

Pressure-assisted cyclic washing of heavy-metal-contaminated sediments

Remediation of heavy-metal-contaminated sediment is often hampered by the availability of heavy metals to the added chemical agents because the heavy metals are often shielded by the sediment matrix. Effective heavy-metal extraction technique becomes an important factor in enhancing the treatment efficiency. A novel extraction/washing technique utilizing chelating agent and elevated pressure in consecutive cycles of compression and decompression has been developed for heavy-metal-contaminated sediment washing in the presence of chelating agent. In this study, the optimal operational conditions of pressure-assisted cyclic washing of Cu-contaminated sediments (initial Cu concentration = 23.177 mg/kg) were determined in a laboratory-scale system. The control factors included applied pressure level, washing time, applied chelant [ethylenediamine-tertraacetic (EDTA)] concentration (0.01–0.5 M), pressure times, and application of consecutive batches washing. Results from the bench-scale study showed that up to 70 % of Cu can be removed from the sediments when 10 atm of pressure was applied for washing. The efficiency dropped to 55 % when the pressure dropped to 6 atm. Under the same operational conditions, the optimal cyclic washing time was 60 min. Results from the particle size analyses indicate that the mean particle size dropped from 100 to 50 μm after the pressure-assisted cyclic washing. Thus, cyclic pressure caused the fracture of sediment aggregates resulting in the exposure of Cu to chelating agents. With the assistance of pressure cyclic system, the total washing time and the amount of added chemical agent used can be significantly reduced.     

Defining physico-chemical variables, chlorophyll-a and Secchi depth reference conditions in northeast eco-region lakes, China

Establishing reference conditions for regional lakes is necessary to assess human impact on aquatic ecosystems, protect water quality and biotic integrity. The northeast eco-region lakes often present a marked seasonal variability in hydrological, biological and geochemical processes, which could affect physico-chemical variables, chlorophyll-a and Secchi depth reference conditions. Reference conditions were calculated using two different methods: lake population distribution method and trisection method. General physico-chemical reference conditions (pH, conductivity, BOD and nutrients) and chlorophyll-a, and Secchi depth reference conditions were established using the two approaches combined with the analysis of seasonal variability for each parameter for shallow and deep lake types in the northeast eco-region lakes. The results indicated that depth was an important factor affecting physico-chemical variables, chlorophyll-a and Secchi depth reference values. Moreover, the seasonal differences in parameters were also assessed using a non-parametric repeated measure ANOVA (Friedman test) in the shallow and deep lakes. Some parameters showed a seasonal variability for shallow and deep lakes. The least restrictive reference values of the four seasons were proposed to simplify the water quality assessment for regional lake management goals. These results indicated that the 50th percentile (median) value from the best one-third of the nutrient-concentration data distributions is more appropriate for the northeast eco-region lakes.     

Accumulation and risk of heavy metals in relation to agricultural intensification in the river sediments of agricultural regions

The enrichment characteristics and risk of heavy metals were studied in the sediments of Liucha River in Chao Lake Valley, where agricultural intensification has developed rapidly since the 1980s. The results revealed that Cd, Pb and Zn showed the lowest levels in the upper reaches and peak values in the lower reaches, increasing from 0.064, 7.75 and 59.75 mg/kg to 0.176, 12.33 and 96.82 mg/kg on average, respectively. Enrichment factor (EF) analysis showed that the EF values of Cd, Pb and Zn (maximum 4.76, 2.51 and 2.74, respectively) all increased from the upper reaches to the lower reaches (>1.5), while correlation analysis and cluster analysis showed that they primarily originated from the extensive use of phosphate fertilizer. In addition, the comprehensive potential ecological risk due to Cd, Cr, Cu, Ni, Pb and Zn in the sediments showed low degree, but Cd showed moderate and high risk at some sites. Therefore, heavy metal pollution due to agricultural intensification in the agricultural regions of Chao Lake Valley should be given great attention during management of the water environment.     

Past atmospheric trace metal deposition in a remote lake (Lake Ngoring) at the headwater areas of Yellow River,Tibetan Plateau

A complete record derived from a core dated both by ²¹⁰Pb and ¹³⁷Cs chronologies from Lake Ngoring at the headwater areas of the Yellow River provides new insight into the changing atmospheric deposition of trace metals including Cd, Cr, Cu, Ni, Pb, and Zn. This study showed that there was an inflection in the early 1960s, before which both fluxes and contents of Cd, Ni, Pb, and Zn remained relatively steady or slowly increased, and thereafter continued increases both in fluxes and contents were found. Taking Pb as an example, the flux increased from 0.13 (before 1960) to 0.25 mg m^?2 a^?1 (averaged 1963–2006). According to atmospheric flux calculations using Al as a reference element, atmospheric fluxes of trace metals generally showed a rapid increase and peaked in recent years, closely following the historical economic development of the neighboring region, mainly for Qinghai and Gansu provinces. The atmospheric inventory for Zn was the highest, reaching 1.068 g m^?2, while the lowest was for Cd, at only 0.079 gm^?2. The percentage proportions of atmospheric deposition for Cd, Ni, and Zn were 37, 12, and 8.7 %, respectively. Hence, the atmospheric contribution to the trace metal content via long range transport is not negligible when considering input of materials to lake ecosystems.     

藏北商旭造山型金矿床的发现及意义

西藏双湖县商旭金矿床位于班公湖-怒江缝合带中段。矿体赋存于中-下侏罗统木嘎岗日群浅变质复理石中,受北西西向断裂构造控制,呈透镜体状、脉状,或者似层状产出;矿石矿物以自然金为主,矿石类型为石英脉型和蚀变岩型,围岩蚀变特征明显。该矿床主要受地层及构造因素控制,矿区的构造、围岩蚀变、矿物、地球化学异常等可作为找矿标志。野外地质调查和矿床对比研究显示,商旭金矿床在矿物共生组合、蚀变类型、构造类型等方面,与典型的造山型金矿床相似,其成因类型属于造山型金矿床。商旭金矿床的发现为班公湖-怒江成矿带金等贵金属矿产的地质找矿工作开辟了新的方向。     

内蒙古卓资县大苏计斑岩型钼矿床辉钼矿Re-Os同位素年龄及流体包裹体研究

内蒙古卓资县大苏计钼矿床位于华北克拉通北缘中段的凉城断隆内,是近年来在华北克拉通北缘发现的一个大型斑岩钼矿床,矿体主要产于印支期石英斑岩和正长花岗斑岩中。成矿过程可以划分为石英_钾长石_黄铁矿±辉钼矿±磁铁矿阶段(早阶段)、石英_绢云母_辉钼矿_黄铁矿阶段(中阶段)和石英_方解石_黄铁矿±闪锌矿±方铅矿阶段(晚阶段)。矿石中5件辉钼矿的Re_Os同位素模式年龄介于(223.6±3.1)Ma~(224.2±3.4)Ma之间,其加权平均值为(223.9±1.4)Ma(MSWD=0.017),等时线年龄为(223.5±5.5)Ma(MSWD=0.026),表明大苏计钼矿床形成于印支期。大苏计钼矿床发育富液型、富气型、H2O_CO2型、含子矿物型和纯气相包裹体。成矿早阶段主要发育富液型、富气型包裹体,另有少量H2O_CO2型包裹体,其均一温度介于342~430℃之间,盐度w(Na Cleq)介于3.4%~11.0%之间;中阶段主要发育富液型、富气型、H2O_CO2型和含子矿物型包裹体,另有少量纯气相包裹体,其均一温度为234~380℃之间,盐度w(Na Cleq)介于6.2%~34.9%之间;晚阶段仅发育富液型包裹体,其均一温度介于202~280℃之间,盐度w(Na Cleq)介于1.2%~11.7%之间,指示该阶段有大气降水的加入。成矿流体从早、中阶段的H2O_Na Cl_CO2体系演化为晚阶段的H2O_Na Cl体系。早、中阶段流体均为不混溶流体,流体沸腾是成矿物质沉淀的主要机制。集宁地区钼矿床主要为斑岩型,至少存在晚三叠世和晚侏罗世2期钼成矿事件。