福建省东部火山岩地区银矿成矿地质条件及找矿方向

通过对该区银矿床地质特征、成矿地质条件和成矿规律的研究，将区内银矿按成因、成矿作用、矿床地质特征等划分为三类六型。指出了火山－次火山热液型银矿是本区银矿的重要类型。总结了银矿的找矿标志，提出了本区银矿的主攻类型和主攻地区。     

硅灰石、透辉石在陶瓷中的基本反应和作用

本文以硅灰石和高岭石、透辉石和高岭石为端元组分,推导了二元假相图。根据这两个假相图,提出了四个基本固相反应。用这些基本反应以及硅灰石、透辉石的矿物学性质,说明了它们对陶瓷坯体工艺性能的作用。     

The influence of the surroundings on the morphology of galaxies

The characteristics of galaxies within galaxy groups are investigated as a function of the surroundings. It is shown that the relative number of the galaxies with different morphological type is correlated with the number of members within the group, but the fraction of E+S0 galaxies does not depend on the mean-pairwise distance between the galaxies, the density of the luminous matter as well as the velocity dispersion in the group.     

GRS 1915+105的X射线能谱分析及黑洞自旋测量

GRS 1915+105是银河系内的低质量黑洞X射线双星,其能谱和黑洞自旋已经得到了广泛的研究.自2018年6月开始,其X射线流量下降到了低流量水平,其间偶尔会产生多波段的耀发.利用Insight-HXMT(Insight-Hard X-ray Modulation Telescope,简称为慧眼)卫星在2020年8月30日到2020年10月13日之间对GRS1915+105的观测数据,研究了其能谱特性,发现在此次爆发过程中, X射线能谱可以用一个康普顿化的多温黑体谱很好地拟合.整个爆发的硬度强度图(Hardness-Intensity Diagram, HID)一直处于软态.采用GRS1915+105的最新动力学参数M=12.4_-1.8^+2.0M⊙, i=60°±5°, D=8.6_-1.6^+2.0kpc (M、M⊙、i和D分别表示黑洞质量、太阳质量、盘倾角和距离),得到其无量纲黑洞自旋a*的一个下限a*> 0.9990,确认了GRS 1915+105是一个具有极端自旋的黑洞.考虑本地吸收体的...     

黑洞吸积盘的演化及温度分布的热不稳定性

本文在Ｔｈｏｒｎｅ工作的基础上讨论了吸积盘中黑洞的有关参量的演化，以及由Ｓｃｈｗａｒｚｓｃｈｉｌｄ黑洞吸积盘向Ｋｅｒｒ黑洞吸积盘演化过程中对吸积盘辐射通量的影响，最后针对几个典型的辐射过程，分别讨论了黑洞吸积盘在牛顿框架中的温度分布方程与广义相对论的温度分布方程的热不稳定性，并给出此类问题的热不稳定性的判据。     

Monochromatic images in stokes parameters and the structure of magnetic fields in sunspots

Taking into account magneto-optical effects, we have obtained numerical solutions of the transfer equations for the Stokes parameters, calculated the linearly polarized intensity (U) and constructed its monochromatic images of unipolar sunspots. By comparison with the observational material of the vector magnetograph of the Marshall Space Flight Center, Huntsville (Alabama), we have found that the model of radial magnetic fields may give rise to U monochromatic images close to those observed. The same conclusion has been obtained previously by Landi Degl'Innocenti (1979), although his analysis was performed with the Milne-Eddington approximation instead of a detailed sunspot model. Moreover, we have shown that the model of spiral magnetic fields leads to results in contrast with observations.     

维生素对凡纳滨对虾N-乙酰-β-D-氨基葡萄糖苷酶的效应研究

以凡纳滨对虾中提取的N-乙酰-β-D-氨基葡萄糖苷酶(NAGase,EC 3.2.1.52)为研究对象,以对-硝基苯-N-乙酰-β-D-氨基葡萄糖苷(pNP-NAG)为底物,考察了几种养殖常用维生素对该酶活力的影响.结果表明,VB12、烟酸、核黄素等对酶活力基本上没有影响;而VB1、VB6、抗坏血酸等对该酶活力均有不同程度的抑制作用.随着抑制剂浓度增大,酶活力呈指数下降,测定导致酶活力下降50%的抑制剂浓度(IC50)分别为16.0、13.5、37.5mmol/dm3.进一步研究了VB6的抑制作用动力学,结果显示:VB6对酶的抑制作用为非竞争性可逆抑制,其对酶抑制常数(KI)为 15.2mmol/dm3.该研究对凡纳滨对虾的人工养殖具有一定的参考价值.     

高海拔宇宙线观测站LHAASO概况

宇宙线发现百年以来,宇宙线起源仍然是一个谜.研究宇宙线起源主要在甚高能(VHE)伽马射线天文学和宇宙线物理学两个领域交叉展开.新一代高海拔宇宙线观测站(LHAASO)拥有高海拔、全天候和大规模优势,利用多种探测手段对宇宙线开展联合观测,大幅提升对伽马射线和宇宙线的鉴别能力.LHAASO将开展全天区伽马源扫描搜索以大量发现新伽马源,将获得30TeV以上伽马射线探测的最高灵敏度,将在宽达5个数量级的能量范围内精确测量宇宙线分成份能谱,为揭开宇宙线起源谜团给出重要判据.系统介绍了LHAASO的探测器结构、性能优势和科学目标.     

沉积物孔隙毛细管压力与甲烷水合物饱和度关系研究

To better understand the relationship between the pore capillary pressure and hydrate saturation in sediments, a new method was proposed. First, the phase equilibria of methane hydrate in fine-grained silica sands were measured. As to the equilibrium data, the pore capillary pressure and saturation of methane hydrate were calculated. The results showed that the phase equilibria of methane hydrates in fine-grained silica sands changed due to the depressed activity of pore water caused by the surface group and negatively charged characteristic of silica particles as well as the capillary pressure in small pores together. The capillary pressure increased with the increase of methane hydrate saturation due to the decrease of the available pore space. However, the capillary-saturation relationship could not yet be described quantitatively because of the stochastic habit of hydrate growth.     

Study on General Performance of Jack-up Under Elevated Condition

Method of checking for jack-up elevated performance including leg structure strength, fixation system or jacking system bearing capacity, pre-load requirements, spud can bearing capacity and overturning stability is suggested in this paper. As an example, a jack-up with truss legs is analyzed by finite element analysis method. This paper may be helpful to the rig owners, operators and designers.