Simulation of the east asian summer monsoon using a variable resolution atmospheric GCM

The East Asia summer monsoon (EASM) is simulated with a variable resolution global atmospheric general circulation model (GCM) developed at the Laboratoire de Météorologie Dynamique, France. The version used has a local zoom centered on China. This study validates the model's capability in reproducing the fundamental features of the EASM. The monsoon behaviors over East Asia revealed by the ECMWF reanalysis data are also addressed systematically, providing as observational evidence. The mean state of the EASM is generally portrayed well in the model, including the large-scale monsoon airflows, the monsoonal meridional circulation, the cross-equatorial low-level jets, the monsoon trough in the South China Sea, the surface cold high in Australia, and the upper-level northeasterly return flow. While the performance of simulating large-scale monsoonal climate is encouraging, the model's main deficiency lies in the rainfall. The marked rainbelt observed along the Yangtze River Valley is missed in the simulation. This is due to the weakly reproduced monsoonal components in essence and is directly related to the weak western Pacific subtropical high, which leads to a fragile subtropical southwest monsoon on its western flank and results in a weaker convergence of the southwest monsoon flow with the midlatitude westerlies. The excessively westward extension of the high, together with the distorted Indian low, also makes the contribution of the tropical southwest monsoon to the moisture convergence over the Yangtze River Valley too weak in the model. The insufficient plateau heating and the resulting weak land-sea thermal contrast are responsible for the weakly reproduced monsoon. It is the deficiency of the model in handling the low-level cloud cover over the plateau rather than the horizontal resolution and the associated depiction of plateau topography that results in the insufficient plateau heating. Comparison with the simulation employing regular coarser mesh model reveals that the local zoom technique improves, in a general manner, the EASM simulation.     

地震作用下的灰坝液化特征及其动力稳定性分析--以安阳电厂为例

根据安阳电厂灰坝岩土工程性质及其动力学特性,建立了适合灰坝工程的动力分析模型并采用有限元法进行了动力分析.在此基础上,在不同工况条件下对灰坝进行了抗液化安全评价及抗震稳定性分析.研究表明,在不设碎石桩、无排渗体条件下,粉煤灰子坝的抗液化安全系数Ks＜1.25,将发生液化;在设碎石桩、有排渗体条件下,粉煤灰子坝的抗液化安全系数明显提高,Ks≥1.25,不会发生液化.抗震稳定性分析表明,在上述两种工况条件下灰坝是稳定的.     

鄂尔多斯古生界流体包裹体特征及其与油气演化关系

对鄂尔多斯盆地奥陶系碳酸盐岩、石炭-二叠系石英砂岩成岩作用研究的基础上,分别对上述岩石流体包裹体作了初步研究。奥陶系碳酸盐岩包裹体均一温度具有三个区段 :6 0～ 10 0℃,10 0～ 16 0℃,16 0～ 2 2 0℃;石炭-二叠系石英砂岩包裹体均一温度三个区段为 90～ 110℃,12 0～ 14 0℃,16 0～ 2 2 0℃。并利用包裹体测温资料结合已有的镜质体反射率、磷灰石裂变径迹等研究成果,对流体包裹体在鄂尔多斯盆地油气田形成、演化中应用作了初步探讨。     

ODP 1144站钻孔沉积物中微玻璃陨石的元素地球化学特征

利用电子探针和激光探针等离子体质谱方法分析了取自南海北部的ODP1144钻孔沉积物中的微玻璃陨石和取自邻近的广东省湛江和吴川玻璃陨石的主元素和微量元素组成。结果显示，这些微玻璃陨石属于亚洲-澳大利亚散落区的普通微玻璃陨石。从成分上看，这些微玻璃陨石存在两种不同的类型，其中的绝大部分Al2O3含量在19.0%以上，属于高Al类型，相应的难熔微量元素含量也比较高；个别微玻璃陨石Al2O3含量（13.0%)和难熔微量元素含量较低，微量元素含量和特征比值都与邻近的广东省湛江和吴川的玻璃陨石相近。元素地球化学特征意味着，这些微玻璃陨石来源于同一靶源区，但靶区的物质组成并不均一。     

全谱直读等离子发射光谱法直接测定天然矿泉水中的SO2-4

采用全谱直读等离子发射光谱(ICP-AES)直接测定天然矿泉水中SO2-4的方法在优化工作条件下SO42-的测定下限为0.09mgL-1,方法简便,快速,适用于批量生产.     

X射线衍射峰五基本要素的物理学意义与应用

本文根据Bragg衍射方程、Scherrer方程、衍射强度计算原理，研究讨论了X射线衍射5构成要素中的衍射峰位置、衍射峰宽度、衍射峰高度的物理学意义。根据实验研究证明了衍射峰不对称性的几何条件特征，并用地质事实验证了衍射形态变化与晶格应变和粒度大小的内在联系。从而阐明了单个衍射峰5基本构成要素的完整物理学意义，并以实例论证了5要素的实际应用价值。     

Origin of a large breccia-vein system in the Sanerlin uranium deposit, southern China: a reinterpretation

The early Tertiary Sanerlin uranium deposit is located near the southwestern margin of the Chaling-Yongxing pull-apart basin defined by the Chaling-Yongxing and Chenxian-Linwu sinistral strike-slip faults in southern China. The uranium ores are hosted in 15 breccia-vein bodies, which are separately located in the cores of three secondary anticlines of the Upper Permian Dangchong Formation. Individual breccia-vein bodies are composed of fragments of silicified shale and sandstone from the Dangchong Formation, and quartz veinlets as cements. These fragments, together with quartz veins, form a mosaic texture. Hydrothermal pitchblende is the only commercial uranium mineral, mainly occurring as disseminated grains within quartz veins or coating fragments. Other metallic minerals include molybdenite, pyrite, chalcopyrite, galena, sphalerite, and red microcrystalline hematite. Fluid inclusions in quartz veins have homogenization temperatures ranging from 150 to 280 °C, and calculated salinity values between 5.6 and 13.4 wt% NaCl equivalent. Stable isotope analyses show that the mineralizing fluid was characterized by '¹⁸O values of -2.2 to +2.6‰ and 'D_H2O values of -134 to -110‰. These analytical data demonstrate that hydrothermal fluids were mainly derived from formation waters (brines) of the Chaling-Yongxing basin. Fluid overpressuring was caused by an abnormal geothermal gradient and impermeable shales in the deposit area. The geometry, texture, and structure of the breccia-vein system, along with the fluid pressure estimates, suggest that hydraulic fracturing generated the mineralized breccia-vein system. Pitchblende and associated minerals were deposited when gaseous phases were released abruptly from the ore fluids due to the hydraulic fracturing.