东昆仑五龙沟金矿田控矿构造带的变形条件——来自EBSD组构的启示

五龙沟金矿田是东昆仑地区最重要的金矿集中区之一,金矿田主要控矿构造为偏脆性断裂破碎带,在三条控矿构造带中仅在萤石沟—红旗沟构造带邻近北侧的局部出露韧性变形带。本文作者运用电子背散射衍射技术(EBSD)技术方法,对东昆仑五龙沟金矿田萤石沟—红旗沟构造带变形岩石的组构分析显示,花岗质糜棱岩韧性变形强烈,大部分样品石英变形机制是以中温I级柱面(1010)1120滑移为主,变形式样比较单一;少量样品为中高温II级柱面(101—0)0001滑移和中低温底面(0001)112—0滑移。从岩石组构特点结合宏观构造分析,五龙沟金矿田萤石沟—红旗沟构造带及其邻近北侧经历了中-中深层次、中-中高温条件(15~25 km,t=350~550°C,P=0.40~0.60 Gpa)的韧性变形,局部叠加中浅层次、中低温条件(10~15 km,t=250~350°C,P=0.25~0.40 Gpa)的韧脆性变形;而岩金沟和三道梁—苦水泉构造带为低温低压条件的脆性破碎带。结合变形花岗闪长岩年代学资料,确定构造变形时代为早中生代。     

2017年九寨沟7.0级地震序列震源机制解和构造应力场特征

九寨沟余震序列的震源机制和构造应力场有助于认识本次地震的发震构造和孕震机理。本文基于四川区域地震台网的波形资料, 采用波形拟合(CAP)方法和P波初动+振幅比(HASH)方法反演得到2017年8月8日九寨沟7.0级地震序列中59次ML≥3.0地震的震源机制解, 并基于该结果采用阻尼线性逆推法(DRSSI), 计算研究区域的平均构造应力场, 给出该区域的应力场特征。结果显示, 利用CAP方法反演得到的本次主震的最佳双力偶机制解节面I: 走向248°/倾角86°/滑动角–169°, 节面II: 走向157°/倾角79°/滑动角–4°, 矩震级为Mw6.31, 矩心深度5 km, 属走滑型地震事件; 大部分余震的震源机制解错动类型与主震一致, 矩心深度集中在3~10 km; 应力场反演结果显示, 该区域周边的应力性质为走滑型, 最大主应力方向呈NWW–SEE向, 与该区域的应力场方向一致, 表明本次地震主要受区域应力的控制。结合该区域的地震地质构造等已有研究成果, 分析认为此次地震的发震断层为走向NW–SE、倾向SW的左旋走滑断裂——树正断裂, 巴颜喀拉块体向E-SE向的水平运动受到华南块体的强烈阻挡导致此次地震的发生, 汶川地震的发生对本次地震具有一定的促进作用。     

新疆西南天山阿万达金矿区赋矿围岩物源及形成时代:碎屑锆石U-Pb年代学制约

阿万达金矿位于西南天山造山带内。此次研究在简要总结其矿床地质特征基础上,对与阿万达金矿成矿密切相关的阿克苏群中硅质片岩围岩分别进行了岩石地球化学分析和LA-ICP-MS碎屑锆石U-Pb定年研究,以期对围岩的沉积环境、物源及形成时代进行讨论。岩石地球化学分析结果显示,阿万达金矿赋矿围岩中硅质片岩的原岩可能为一套成熟度较低的泥岩或砂岩,物源主要为石英岩质沉积物,沉积环境可能处于活动大陆弧内的沉积盆地内。U-Pb定年结果显示,其碎屑锆石定年数据主要形成了加权平均年龄值为405 Ma或406 Ma的年龄峰,其谐和年龄最小峰值即405 Ma可以作为其最大沉积年龄。因此笔者认为阿克苏群中硅质片岩的沉积时代并不是前人所定的长城纪,而是不老于早泥盆世。另外,这一地层的物源组成具有多样性,～405 Ma碎屑锆石占主体,可能与哈尔克山北缘火山弧内的早泥盆世岩浆活动有关;～745Ma的碎屑锆石的出现,表明其物源有少部分来自新元古代岩石;极少数～2.50 Ga的碎屑锆石的出现,反映了华北地台对本地层有物源上的贡献。     

丹阳天王寺边坡稳定性评价及防治措施

针对苏南地区典型露采边坡的地层岩性及地质构造特点,以极限平衡理论为基础,运用GeoStudio软件中的SLOPE/W模块和VADOSE/W模块计算分析江苏丹阳天王寺边坡在天然工况、暴雨工况及地震工况下的稳定性。结果表明:天然工况下,潜在滑动面分布范围最小,稳定性最高,存在滑动的危险性;暴雨工况下,潜在滑动面分布范围有所增大,稳定性降低,边坡滑动的可能性较大;地震工况下,潜在滑动面分布范围最广,稳定性最低,边坡滑动的可能性很大。基于上述结果,提出防治措施。     

Development Phases and Mechanisms of Tectonic Fractures in the Longmaxi Formation Shale of the Dingshan Area in Southeast Sichuan Basin, China

Shale gas has currently attracted much attention during oil and gas exploration and development. Fractures in shale have an important influence on the enrichment and preservation of shale gas. This work studied the developmental period and formation mechanism of tectonic fractures in the Longmaxi Formation shale in the Dingshan area of ??southeastern Sichuan Basin based on extensive observations of outcrops and cores, rock acoustic emission (Kaiser) experiments, homogenization temperature of fracture fill inclusions, apatite fission track, thermal burial history. The research shows that the fracture types of the Longmaxi Formation include tectonic fractures, diagenetic fractures and horizontal slip fractures. The main types are tectonic high-angle shear and horizontal slip fractures, with small openings, large spacing, low densities, and high degrees of filling. Six dominant directions of the fractures after correction by plane included NWW, nearly SN, NNW, NEE, nearly EW and NW. The analysis of field fracture stage and fracture system of the borehole suggests that the fractures in the Longmaxi Formation could be paired with two sets of plane X-shaped conjugate shear fractures, i.e., profile X-shaped conjugate shear fractures and extension fractures. The combination of qualitative geological analysis and quantitative experimental testing techniques indicates that the tectonic fractures in the Longmaxi Formation have undergone three periods of tectonic movement, namely mid-late Yanshanian movement (82–71.1 Ma), late Yanshanian and middle Himalaya movements (71.1–22.3 Ma), and the late Himalayan movement (22.3–0 Ma). The middle-late period of the Yanshanian movement and end of the Yanshanian movement-middle period of the Himalayan movement were the main fracture-forming periods. The fractures were mostly filled with minerals, such as calcite and siliceous. The homogenization temperature of fracture fill inclusions was high, and the paleo-stress value was large; the tectonic movement from the late to present period was mainly a slight transformation and superposition of existing fractures and tectonic systems. Based on the principle of tectonic analysis and theory of geomechanics, we clarified the mechanism of the fractures in the Longmaxi Formation, and established the genetic model of the Longmaxi Formation. The research on the qualitative and quantitative techniques of the fracture-phase study could be effectively used to analyze the causes of the marine shale gas fractures in the Sichuan Basin. The research findings and results provide important references and technical support for further exploration and development of marine shale gas in South China.     

Two Phases of Mineralization in the Dabaoshan Polymetallic Deposit,Guangdong Province: Constraints from Re-Os Geochronology of Black Carbonaceous Mudstone and MolybdeniteEI北大核心CSCD

The Dabaoshan polymetallic deposit is a polygenetic composite ore deposit located at south of the Qinhang (Qinzhou-Hangzhou) Metallogenic Belt, which is composed mainly of SEDEX type Cu-Pb-Zn and porphyry-skarn type W-Mo orebodies. Systematic field study shows that the W-Mo mineralization exhibits as quartz-vein type and skarn type orebodies around the granodioritic porphyry, or superimposes on the SEDEX type Cu-Pb-Zn orebody, while the Cu-Pb-Zn mineralization occurs mainly in the Qiziqiao Formation as stratiform-substratiform type and breccia type orebodies with typical SEDEX-type characteristics. Re-Os dating of five molybdenite separates from porphyry-skarn type W-Mo orebodies yielded isochron ages of 163.6±1.0 Ma (MSWD=0.58), which represents the age of W-Mo mineralization. Re-Os dating of seven black carbonaceous mudstone samples from a Cu-Pb-Zn orebody yielded isochron age of 387.6±9.9 Ma (MSWD=56), which is interpreted to be the age of SEDEX-type Cu-Pb-Zn mineralization. These ages indicate that there are at least two stages of ore mineralization in the Dabaoshan polymetallic deposit. The W-Mo mineralization is related to the Yanshanian intermediated-acidic intrusions, while the stratiform-substratiform SEDEX-type Cu-Pb-Zn mineralization is associated with the Hercynian seafloor hydrothermal activities. © 2018, Science Press. All right reserved.     

基于BOTDR技术的深埋岩溶土洞监测分析

岩溶洞穴发育成地表塌陷影响因素复杂。为了获得岩溶土洞监测标识区域的应力特征,在太沙基松动土压力理论基础上,对岩溶土洞发育历程中松动区竖向土压力进行了分析。松动区的空间位置由洞穴特征及其上方岩土介质的物理、力学性质决定;平面应变和非平面应变条件下,松动区竖向土压力的分布特征差异明显。根据岩溶土洞上方松动区竖向土压力的分布特征,结合BOTDR技术优点,提出应用BOTDR技术监测岩溶土洞的发育,针对光纤监测系统设计中光纤布线型式进行了分析。岩溶土洞应力场变化特征的定量研究对光纤传感技术应用于岩溶土洞监测设计提供理论依据和指导。      

川滇黔邻区龙马溪组页岩气富集主控因素与勘探方向

中国的页岩气资源评价必须立足于中国主要陆块的地质条件与构造演化特点之上,对于不同层系、不同地区的页岩气选区评价,也必须抓住关键因素。川滇黔邻区的五峰组-龙马溪组富有机质页岩发育,但保存条件较渝东南地区更为复杂。印支期以来,该区经历了多期次构造应力场转换,断裂、褶皱发育,因此,建立针对性的页岩气选区评价参数体系是该区页岩气勘探走出困局的当务之急。本文在分析该区已有页岩气钻井成效的基础上,立足于扬子海相层系页岩气勘探应是基于保存条件的"连续型甜点区"的选区评价基本思路,结合前人研究成果,系统梳理出一套评价指标体系。该体系涵盖5大因素(区域盖层、直接盖层、底板条件、页岩层自身条件、构造改造强度)、4个等级、17个选区评价参数。另外,根据已有相关钻井数据,总结提出了5个页岩气层评价表征参数(含气量、孔隙度、电阻率、氮气组分含量和压力系数)。根据该指标体系,对川滇黔邻区的主要构造单元进行了梳理分析,优选出5个有利区,提出了各有利区的首选可能突破点。本研究对复杂构造区页岩气有利区带优选具有一定的指导意义。