Geophysical and Geoarchaeological Investigations at Aganoa Beach,American Samoa: An Early Archaeological Site in Western Polynesia

Archaeological investigations at Aganoa, a coastal site in American Samoa, western Polynesia, revealed a marine resources exploitation base for the early inhabitants of the island. A series of 19 radiocarbon age determinations indicates the principal period of site utilization began no later than 570 B.C., and probably earlier, and lasted for about 300 years. This site is squarely in the phase identified by previous scholars as “ancestral Polynesian.” Geophysical survey in the form of long, shore‐perpendicular transects showed the accretionary history of this beach and ridge area. Surprisingly, it revealed that the earlier ridges were directly below the modern ridge (i.e., progradation of this geomorphic feature had not occurred). The survey revealed a buried paleosol with little or no disturbance, which yielded a well‐preserved assemblage of plain and decorated ceramics, stone artifacts, fishhooks, and archaeofauna. No evidence of archaeological continuity was seen between the end of the terminal Lapita occupation and the later reoccupation of the site after about A.D. 700. This study demonstrates the utility and feasibility of using ground‐penetrating radar for the discovery of deeply buried coastal sites.     

Determination of Ga,Ge, Mo,Ag, Cd,In, Sn,Sb, W,Tl and Bi in USGS Whole‐Rock Reference Materials by Standard Addition ICP‐MS

A procedure for determining a wide range of chalcophile and siderophile elements in typical crustal rocks using standard addition and ICP‐SFMS (inductively coupled plasma sector field mass spectrometry) is presented. New results for Ga, Ge, Mo, Ag, Cd, In, Sn, Sb, W, Tl and Bi abundances in USGS whole‐rock reference materials AGV‐2, BHVO‐1, BIR‐1, G‐2, GSP‐1 and W‐2 are reported using this analytical procedure. Intermediate precision of means based on multiple dissolved aliquots of each USGS reference material was 10% RSD or better for Ga, Ge, In and Sn in all, and similarly good for Ag, Cd, Sb, Tl and Bi in most reference materials. Poorer intermediate precision of Mo and W measurements in several reference materials is probably due to higher analytical blanks on these elements and powder heterogeneity due to a sulfide‐related nugget effect in the specific case of Mo in GSP‐1. Results for all elements fell within the range of available published data with the exception of Ag, which yielded systematically higher concentrations than found in the literature for five of the six reference materials, likely reflecting interference from unresolved polyatomic species.     

pH effects in the adsorption of heavy metal ions by clays

The amount of hydroxonium or hydroxyl ion sorbed by the sodium form of clays (kaolin, illite or montmorillonite) has been found to increase in proportion with the amount added (i.e., data fits a Boedeker type equation). The adsorptive capacities, and bonding strengths (as evaluated from Langmuir isotherm plots) varied with clay type and nature of the adsorbing species (values for OH^? being greater than for H⁺).The presence of clay suspensions reduced the pH required for total precipitation of heavy metal ions (e.g., Cu, Pb, Cd, Zn), as hydroxy species, and this behaviour has been re-examined in terms of observed pM, pOH relationships and the effect of ligand additions.     

Supraglacial weathering crust dynamics inferred from cryoconite hole hydrology

Water levels in cryoconite holes were monitored at high resolution over a 3‐week period on Austre Brøggerbreen (Svalbard). These data were combined with melt and energy balance modelling, providing insights into the evolution of the glacier's near‐surface hydrology and confirming that the hydrology of the near‐surface, porous ice known as the ‘weathering crust’ is dynamic and analogous to a shallow‐perched aquifer. A positive correlation between radiative forcing of melt and drainage efficiency was found within the weathering crust. This likely resulted from diurnal contraction and dilation of interstitial pore spaces driven by variations in radiative and turbulent fluxes in the surface energy balance, occasionally causing ‘sudden drainage events’. A linear decrease in water levels in cryoconite holes was also observed and attributed to cumulative increases in near‐surface ice porosity over the measurement period. The transport of particulate matter and microbes between cryoconite holes through the porous weathering crust is shown to be dependent upon weathering crust hydraulics and particle size. Cryoconite holes therefore yield an indication of the hydrological dynamics of the weathering crust and provide long‐term storage loci for cryoconite at the glacier surface. This study highlights the importance of the weathering crust as a crucial component of the hydrology, ecology and biogeochemistry of the glacier ecosystem and glacierized regions and demonstrates the utility of cryoconite holes as natural piezometers on glacier surfaces. Copyright © 2015 John Wiley & Sons, Ltd.     

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.     

A near‐annual palaeohydrological study based on testate amoebae from a sub‐alpine mire: surface wetness and the role of climate during the instrumental period

We present the first testate amoeba‐based palaeohydrological reconstruction from the Swiss Alps, and the first depth to the water table (DWT) calibration dataset for this region. Compared to existing models, our new calibration dataset performs well (RMSEP = 4.88), despite the length of the water table gradient covered (53 cm). The present‐day topography and vegetation of the study mire Mauntschas suggest that it is partly ombrotrophic (large Sphagnum fuscum hummocks, one of which was the coring site) but mostly under the minerotrophic influence of springs in the mire and runoff from the surrounding area. Ombrotrophic Sphagnum fuscum hummocks developed at the sampling site only during the last 50 years, when testate amoebae indicate a shift towards dry and/or acid conditions. Prior to AD 1950 the water table was much higher, suggesting that the influence of the mineral‐rich water prevented the development of ombrotrophic hummocks. The reconstructed DWT correlated with Pinus cembra pollen accumulation rates, suggesting that testate amoebae living on the mire and P. cembra growing outside of it partly respond to the same factor(s). Finally, temperature trends from the nearby meteorological station paralleled trends in reconstructed DWT. However, contrary to other studies made on raised bogs of northwestern Europe, the highest correlation was observed for winter temperature, despite the fact that testate amoebae would more logically respond to moisture conditions during the growing season. The observed correlation with winter temperature might reflect a control of winter severity on surface moisture during at least the first part of the growing season, through snow melt and soil frost phenomena influencing run‐off. More ecohydrological work on sub‐alpine mires is needed to understand the relationships between climate, testate amoebae and peatland development. Copyright © 2009 John Wiley & Sons, Ltd.     

Use of radio-occultation data for ionospheric imaging during the April 2002 disturbances

In 1994, Hajj et al. (1994) proposed the use of radio occultation data in ionospheric imaging. The advantages gained by including this data source are examined in this paper. Many data sources including ground-based and satellite-based observations are available for the events of the April 2002 ionospheric disturbance. This period has been chosen to study simultaneous images of the disturbed ionosphere over the USA and Europe. A 4D tomographic imaging technique known as Multi-instrument Data Analysis System (MIDAS) (Mitchell and Spencer, 2003) is applied in this study. The primary purpose of the study is to compare images produced with and without the use of radio-occultation data. The work investigates whether GPS occultation combined with ground-based GPS data improves the determination of peak height and peak density in the images. The results indicate that the occultation data improve both the peak height and the peak density in the images. The use of ionosonde data is also examined and the results are compared between the USA and Europe.