<Emphasis Type="Italic">In-situ</Emphasis> trace element analyses and Pb-Pb dating of zircons in granulite from Huangtuling,Dabieshan by LAM-ICP-MS

It is revealed by CL images that there are multi-stage growth internal structures of zircons in the Huangtuling granulite, including the inherited zircons, protolith zircons, sector and planar zone zircons and retrograde zircons. In-situ trace element compositions and Pb-Pb ages have been analyzed by LAM-ICP-MS. The sector and the planar zone domains show typical trace element characteristics of granulite zircon (low Th, U, Th/U, total REEs, clear negative Eu anomalies, relatively depleted HREE and small differential degree between MREE and HREE, etc.), indicating that they formed during granulite-facies metamorphism. The protolith zircons have trace element characteristics of crustal zircon (high Th, U, Th/U, total REEs and enriched HREEs, etc.). 12 analyzed spots on granulite-facies domains give a weighted mean ²⁰⁷Pb/²⁰⁶Pb age of (2154±26) Ma (MSWD = 3.8), which is the best estimated age of granulite-facies metamorphism of this sample. The weighted mean ²⁰⁷Pb/²⁰⁶Pb age of 5 analyzed spots on protolith zircon domains is (2714 ± 22) Ma (MSWD = 1.4), which represents the protolith forming time. The discovery of ca. 3.4 Ga inherited zircon indicates that there are Palaeoarchean continental materials in this area. The interpretation of formation conditions and the ages of zircons can be constrained by simultaneous in-situ analysis of trace elements and ages.     

Numerical investigation of the seismic response of a UHV composite bypass switch retrofitted with wire rope isolators

An ultra-high voltage(UHV)composite bypass switch(BPS)faces increasing seismic challenges when UHV projects extend to high seismic intensity areas.The UHV composite BPS still generates excessive stress at the bottom section although hollow composite insulators with high flexural strength are adopted.Since the standard retrofitting strategy by using stiffer supports cannot reduce stress responses,wire rope isolation is introduced.The optimal design of isolation considers both stress and displacement responses since the slenderness and composite material of insulators contribute to significant displacement.The results show that properly designed isolation can significantly reduce stress without excessive displacement responses.A larger radius configuration helps to improve the applicability of small stiffness isolators under high winds.When the isolation still cannot satisfy the requirement,smaller stiffness isolators with a larger radius,or isolators with increased loops and smaller radius,can be introduced to gain better energy dissipation capacity and effectiveness in response mitigation.Accordingly,a three-step design procedure is proposed to increase the damping force but fix the rotational stiffness of isolation.Hence,the application of wire rope isolation can be extended to UHV composite BPS with a low natural frequency,but conductors with enough redundancy should be used.     

Age and nature of eclogites in the Huwan shear zone,and the multi-stage evolution of the Qinling-Dabie-Sulu orogen,central China

In situ LA-ICPMS U-Pb, trace element, and Hf isotope data in zircon demonstrate a Carboniferous age for eclogite-facies metamorphism in Siluro-Devonian protoliths in the Huwan shear zone, Dabie Mountains, Central China. This age contrasts with the more prevailing Triassic age for high- to ultrahigh pressure (HP to UHP) metamorphism in the Qinling-Dabie-Sulu orogen. Metamorphic zircon in two eclogite samples from Sujiahe is characterized by low Th/U ratios, small negative Eu anomalies, flat HREE patterns, and low ¹⁷⁶Lu/¹⁷⁷Hf ratios. These geochemical signatures suggest that the zircon crystallized in the presence of garnet and in the absence of plagioclase feldspar. Furthermore, temperatures of ~ 655 and ~ 638 °C, calculated using the Ti content of zircon, are consistent with their formation during eclogite-facies metamorphism. The weighted mean ²⁰⁶Pb/²³⁸U age of 309 ± 4 Ma (2δ) for this zircon improves previous age estimates for eclogite-facies metamorphism in the Huwan shear zone, ranging from 420 to 220 Ma. Metamorphic zircon from one eclogite sample from Hujiawan, most likely formed during prograde metamorphism, yields an equivalent age estimate of 312 ± 11 Ma. Magmatic zircon cores in the three samples yield ages for the magmatic protoliths of the eclogites ranging from 420 ± 7 to 406 ± 5 Ma, and post-dating the middle Paleozoic collision of the North China and the Qinling terrain. The zircon crystals in the three eclogite samples display a large variation of ε_Hf (t) values of ? 4.9 to 21.3. The metamorphic zircon overgrowths show the same range of ε_Hf (t) values as those of the inherited magmatic crystal interiors. This suggests that the metamorphic zircon overgrowths may have formed by dissolution-reprecipitation of pre-existing magmatic zircon thereby preserving their original Hf isotopic composition. The high ε_Hf (t) values suggest that the protoliths were derived from depleted mantle sources, most likely Paleotethyan oceanic crust; while the low ε_Hf (t) values are attributed to crustal contamination. Some eclogites in the Huwan shear zone have a distinctive signature of continental crust most probably derived from the Yangtze Craton. The coexistence of Paleozoic oceanic crust and Neoproterozoic continental crust with similar metamorphic ages in the Huwan shear zone implies that Paleozoic Paleotethyan oceanic crust was produced within a marginal basin of the northern Yangtze Craton. The opening of the Paleo-Tethyan ocean was slightly younger than the collision of the North China Craton and the Qinling terrain during the Late Paleozoic in the Qinling-Dabie-Sulu orogen. Subduction of the Paleo-Tethyan oceanic crust and associated continental basement resulted in the 309 ± 2 Ma (2σ) eclogite-facies metamorphism in the Huwan shear zone. The subsequent Triassic continent-continent collision led to the final coalescence of the Yangtze and Sino-Korean cratons. Amalgamation of the Yangtze and North China cratons was, therefore, a multistage process extending over at least 200 Ma.     

Morphological responses ofLimnocythere inopinata (Ostracoda) to hydrochemical environment factors

Living ostracod and hydrochemical samples were collected synchronously from more than 50 lakes and small water body in the eastern edge area of the Tibetan Plateau, Northern Tibetan, Southern Tibet and mid-Tibet. The comparison of the adult body length ofLimnocythere inopinata and hydrochemical parameters of their habitats shows that a quantitative relationship exists between the adult body length and salinity expressed as conductivity. An empirical formula to reconstruct paleosalinity is suggested first and applied to salinity reconstruction of CE-2 core from Cuoe Lake, Tibet. The method is verified by comparing its outcome with results of other environment reconstruction methods.

     

Compensation of time‐delay for control of civil engineering structures

Time‐delay is an important issue in structural control. Applications of unsynchronized control forces due to time‐delay may result in a degradation of the control performance and it may even render the controlled structures to be unstable. In this paper, a state‐of‐the‐art review for available methods of time‐delay compensation is presented. Then, five methods for the compensation of fixed time‐delay are presented and investigated for active control of civil engineering structures. These include the recursive response method, state‐augmented compensation method, controllability based stabilization method, the Smith predictor method and the Pade approximation method, all are applicable to any control algorithm to be used for controlled design. Numerical simulations have been conducted for MDOF building models equipped with an active control system to demonstrate the stability and control performance of these time‐delay compensation methods. Finally, the stability and performance of the phase shift method, that is well‐known in civil engineering applications, have also been critically evaluated through numerical simulations. Copyright © 2000 John Wiley & Sons, Ltd.     

Biomonitoring of coastal pollution status using protozoan communities with a modified PFU method

Structural and functional parameters of protozoan communities were assessed as indicators of water quality in Korean coastal waters in the summer of 2000. A modified polyurethane foam unit (PFU) method, named the bottled PFU (BPFU) system, was used in order to carry out the bioassessment. Both parameters suggested that biomonitoring using the BPFU system was more effective than the conventional PFU method in offshore areas. The species number collected by the BPFU system generally decreased as pollution intensity increased at three main stations and was greater than that collected using the PFU method (paired t-test, t = 4.83, p < 0.0001). The Margalef diversity index coincided well with the water conditions. The diversity index values calculated from the BPFU system were also significantly higher than those from the PFU method (paired t-test, t = 5.37, p < 0.0001). Furthermore, the functional parameters, i.e. S(eq),G and T90%, correlated with the pollution status and could thus clearly discriminate the different classes of water quality.     

Introduction of structural aseismic research in China in recent four years

Introduction Greeting the coming of the 21st century, Professor HU Yu-xian and other Chinese scholars briefed the trend of earthquake engineering in China and aboard (HU, 1999; HU, ZHOU, 1999). The experiences and lessons learning from the destructive earthquakes in China and abroad in re-cent years, the damage action of the large velocity impulse in ground motion in near field in seis-mic design, numerous earthquake examples show that there are many weaknesses in aspects of earthquake p…     

山东省气象局电视会商会议系统简介

主要介绍了山东省气象局电视会商会议系统，包括该系统的整体结构、设备和网络情况，以及该系统所具有的功能及其在气象工作中的作用。     

Production of Levulinic Acid from Bagasse and Paddy Straw by Liquefaction in the Presence of Hydrochloride Acid

A method of levulinic acid production from bagasse and paddy straw is presented. Biomass waste was mixed with hydrochloride acid and water, and then liquefied at about 200°C in a pressurized reactor. Both the mass of the biomass and the amount of hydrochloride acid were kept as constants, and the effects of temperature, reaction time, and acid concentration on the levulinic acid yield were studied. It was found that the yield of levulinic acid was maximum when the reaction temperature was carried out for 45 min at 220°C using 4.45% concentration of hydrochloride acid, and the maximum yields of levulinic acid were 22.8 and 23.7% for bagasse and paddy straw, respectively. The products were analyzed using NMR, HPLC, and GC/MS.     

Faults有限元程序在Windows平台上的移植

Faults有限元软件综合高程、热流、断层等多个地球物理场参数,相较于Ansys、Adina等商用有限元软件能更好的处理断层的摩擦机制,因此Faults有限元软件在地学模拟中有独特优势.目前使用的Faults软件基于IBM科学与工程数学库(ESSL),使用环境较为苛刻,使用不便,需要移植源代码.利用Linpack免费数...