Arching effect and displacement on theoretical estimation for lateral force acting on retaining wall

Natural Hazards - A new approach is proposed to evaluate the non-limit active earth pressure in c–φ soil based on the horizontal slices method and limit equilibrium method, which takes...     

Direct Tensile Tests of Red Sandstone Under Different Loading Rates with the Self-developed Centering Device

To study the tensile strength of rock under different loading rates, direct tensile test is the most accurate method. However, the eccentric tension in the process of rock direct tensile test has a significant influence on the test results. In this paper, firstly, a self-developed centering device for rock direct tensile test is introduced, which can effectively eliminate the eccentric tension in the process of rock direct tensile test. Then, with the aid of the self-developed centering device, the direct tensile tests of red sandstone under the loading rates of 0.001 mm/s, 0.01 mm/s and 0.1 mm/s are successfully carried out. After tests, both the macro failure characteristics and the scanning electron microscope micrograph show that the fracture pattern of the rock is caused by pure tensile loading. The stress-strain curves of the direct tensile test of the red sandstone show that the process of the direct tensile test can be roughly divided into four stages. With the increase of loading rate, both of the tensile strength and the peak tensile strain of the rock increase obviously. The direct tensile test of the red sandstone shows obvious loading rate effect.

     

Identifying urban–rural differences in social vulnerability to natural hazards: a case study of China

Identifying and analyzing the urban–rural differences of social vulnerability to natural hazards is imperative to ensure that urbanization develops in a way that lessens the impacts of disasters and generate building resilient livelihoods in China. Using data from the 2000 and 2010 population censuses, this study conducted an assessment of the social vulnerability index (SVI) by applying the projection pursuit cluster model. The temporal and spatial changes of social vulnerability in urban and rural areas were then examined during China’s rapid urbanization period. An index of urban–rural differences in social vulnerability (SVI_D) was derived, and the global and local Moran’s I of the SVI_D were calculated to assess the spatial variation and association between the urban and rural SVI. In order to fully determine the impacts of urbanization in relation to social vulnerability, a spatial autoregressive model and Bivariate Moran’s I between urbanization and SVI were both calculated. The urban and rural SVI both displayed a steadily decreasing trend from 2000 to 2010, although the urban SVI was always larger than the rural SVI in the same year. In 17.5% of the prefectures, the rural SVI was larger than the urban SVI in 2000, but was smaller than the urban SVI in 2010. About 12.6% of the urban areas in the prefectures became less vulnerable than rural areas over the study period, while in more than 51.73% of the prefectures the urban–rural SVI gap decreased over the same period. The SVI_D values in all prefectures had a significantly positive spatial autocorrelation and spatial clusters were apparent. Over time, social vulnerability to natural hazards at the prefecture-level displayed a gathering–scattering pattern across China. Though a regional variation of social vulnerability developed during China’s rapid urbanization, the overall trend was for a steady reduction in social vulnerability in both urban and rural areas.

     

积雪变化对中国森林凋落物分解影响研究进展

森林凋落物的分解对于维持生态系统物质循环和养分平衡具有重要意义,并受到不同积雪厚度下冻融格局的影响。冻融期（包括冻结过程期、完全冻结期、融化过程期）是冻土区凋落物分解的重要时期,该时期分解的凋落物量约占全年分解总量的一半。积雪减少通常会导致土壤温度降低、冻融循环次数增加,进而影响凋落物分解。通过综述近10年来积雪变化对我国森林凋落物分解影响的研究成果发现,积雪厚度减少在冻融期通常会抑制凋落物质量损失、碳元素释放和纤维素降解,生长季则起到促进作用,从全年来看多数表现为抑制作用。因此,冻融作用造成凋落物的物理破坏,对其分解的促进作用主要发生在后续生长季。积雪厚度减少在冻融期通常抑制氮元素释放,生长季和全年则无明显规律;磷元素和木质素目前研究还存在很大差异。最后,进一步阐述了积雪变化对凋落物分解影响研究存在的问题及未来研究发展方向。     

朝鲜半岛平南盆地地质演化综述

平南盆地位于朝鲜半岛中部,处于华北克拉通(中朝克拉通)东缘;其演化历史长达10亿年,其地质记录为揭示东亚现今构造格局的形成提供重要制约。盆地发育中元古界-中生界,从下至上包括黄海群(1.3~1.1Ga)、祥原超群(1.0~0.9Ga,自下而上包括直岘群、祠堂隅群、默川群和灭岳山群等)、燕滩群(狗岘系,0.72~0.54Ga)、黄州系/超群(0.52~0.46Ga,包括下部黄州群和上部法洞群)和平安超群(0.33~0.24Ga)等5个构造层序;各单元之间均为平行不整合;沉积跨度超过10亿年,沉积物厚度累计达到15000m。另外,平南盆地南部发育临津群(0.42~0.35Ga),该地层与中元古界上部-奥陶系很可能呈构造接触关系。平南盆地沉积中心自中元古代晚期从南部逐渐向北部转移,新元古代及早古生代均位于中部,二叠纪盆地沉积中心位于北部。平南盆地沉积碎屑锆石年龄则显示物源发生多期变化:中元古代以盆地北侧基底~1.8Ga峰期岩浆-变质作用岩石为主;中元古代晚期以同沉积就位的岩浆岩为主;新元古代以1.6~1.5Ga和1.2~1.1Ga峰期的岩浆岩为主;寒武纪以~2.5Ga和~1.8Ga峰值的变质基底岩石为主。以上变化反映了古地理格局的显著变化。推测新元古代早期及之前,华北克拉通曾与某个发育1.6~1.5Ga和1.2~1.1Ga岩浆作用的克拉通或者岩浆弧相邻(近邻或远邻);地层记录了迄今所知新元古代最早的碳同位素负漂移(默川负漂移,~0.92Ga),地层可能还记录了最晚的负漂移(燕滩负漂移,可能对应全球Gaskiers负漂移,~0.55Ga),它们可能是对新元古代全球长期多次岩浆-裂解-冰期事件的响应。     

东特提斯喜马拉雅下白垩统碎屑锆石U-Pb年代学及其古地理

东特提斯喜马拉雅在中生代位于东冈瓦纳大陆的结合部位,其古地理对于了解东冈瓦纳大陆裂解至关重要.对东特提斯喜马拉雅塔嘎地区沉积地层进行了详细的碎屑锆石U-Pb年代学研究.结果表明,东特提斯喜马拉雅塔嘎地区采样剖面沉积下限为126.6±2.7 Ma.碎屑锆石年龄谱显示东特提斯喜马拉雅塔嘎地区采样地层主要包含~520 Ma、~890 Ma和~1 200 Ma的特征峰值年龄,对比结果表明东特提斯喜马拉雅塔嘎地区沉积地层碎屑锆石年龄谱与印度东部和澳大利亚西南部地层碎屑锆石年龄谱具有一定的相似性.结合东冈瓦纳岩浆活动记录以及该剖面下部玄武岩年龄,东特提斯喜马拉雅塔嘎地区地层沉积于东特提斯喜马拉雅从东冈瓦纳大陆分离时期,其物质来源可能为印度东部、澳大利亚西南部以及南极大陆.      

甘肃通渭“9·14”常河滑坡成因机理

2019年9月14日11时,受多日降雨影响,甘肃省定西市通渭县常家河镇小庄村发生大规模黄土滑坡,体积约800万m³。滑坡造成部分农田、公路及阳坡大桥损毁,直接经济损失约2 347.2万元。在对滑坡现场进行大量地面调查的基础上,通过无人机航拍、现场测绘、走访调查和数值模拟等手段对滑坡的变形破坏特征进行了分析,并在此基础上探讨了其成因机制。结果表明:斜坡体是在震裂、蠕变、软化、水动力等多种条件下按照一定的先后顺序由稳态逐步演化至失稳;该滑坡的失稳演化过程和灾变机制可以概括为原始斜坡(黄土、泥岩二元层状结构)-地震触发(滑坡堆积体、坡体震裂损伤)-蠕变弱化(层间剪切带、裂缝和落水洞扩展)-降雨激发(滑带软化、泥化,水压力作用)-失稳滑动(滑面贯通)5个阶段;由于长期的蠕变和雨水的渗透冲蚀,坡体上的落水洞和地下暗河十分发育,且是控制本次滑坡边界的关键因素;滑坡后缘和前缘变形剧烈,中部变形相对稍弱,推断该滑坡为受地形及地下水作用控制明显的牵引-推移式复合滑坡。     

Variations of methane stable isotopic values from an Alpine peatland on the eastern Qinghai-Tibetan Plateau

Acta Geochimica - Isotopic signature is a powerful tool to discriminate methane (CH4) source types and constrain regional and global scale CH4 budgets. Peatlands on the Qinghai-Tibetan Plateau are...     

Numerical characterization of slope rock mass through considerations of hydraulic and mechanical properties

Landslides - In this paper, the slope rock mass is numerically characterized by considering hydraulic and mechanical properties using two distinct element models. The flow rate and permeability are...