点分布-双蛇模型用于矢量边界更新

在利用遥感影像更新GIS矢量数据的过程中,往往忽略了对已知信息的有效利用,针对这一问题,本文提出一种基于点分布的双蛇模型用于GIS矢量数据更新,该模型利用已有遥感影像信息计算目标边界点的平均分布,以此为"镜面"建立初始矢量边界的"镜像",将两边界各自演化的结果取平均作为更新后的GIS矢量边界。该方法同时利用了GIS和遥感的历史数据作为先验知识,分别作为蛇模型的初始位置和区域约束信息,使遥感与GIS信息结合更加紧密。仿真实验表明,基于点分布的双蛇模型在GIS矢量边界更新的应用中,可以得到比以传统蛇模型更好的更新准确率和多边形相似度,并且接近手工方法的效果。     

东昆仑造山带低山头花岗岩体岩石地球化学特征及其地质意义

低山头一带花岗岩体归属东昆仑弧盆系北昆仑岩浆弧带,位于东昆仑成矿带伯喀里克—香日德成矿亚带东昆仑造山带中段,岩石类型主要为石英闪长岩、正长花岗岩及二长花岗岩。为了加强该地区花岗岩体岩石地球化学与成岩成矿背景探讨,对花岗岩体开展了主量元素、微量元素及矿质元素研究。主量元素组成上,石英闪长岩具中硅（57.64%和58.47%）、富钠（Na₂O/K₂O均为2.57）特点,正长花岗岩具高硅（75.45%~75.99%）、富钾（Na₂O/K₂O为0.74~0.94）特点,二长花岗岩具高硅（66.80%~73.45%）、富钠（Na₂O/K₂O为1.50~2.13）特点;花岗岩体铝饱和指数A/CNK<1,为准铝质岩浆岩;碱饱和指数NK/A集中在0.26~0.69之间,属钙碱性岩石;里特曼组合指数σ₄₃在1.18~2.31之间,属钙碱性类型。花岗岩体轻稀土元素相对重稀土元素富集,岩浆分异特征明显,大离子亲石元素（LILE）富集Rb、K、Ba、Th、Sr、Nd,仅正长花岗岩Sr亏损,高场强元素（HFSE）富集Zr、Hf、Ce,而Nb、P、Ti明显亏损,源区物质为壳幔混合物质,属挤压应力环境中同碰撞I型花岗岩。在岩体实测剖面中获得11种元素分析数据,与青海全省、东昆仑成矿带及其亚成矿带平均元素丰度值进行对比,初步划分不同岩性、不同类型、不同时代花岗岩,以及富集的含矿元素为Au、Zn、Y、Pb等。与区域有成矿事实且为I型花岗岩成因进行对比,认为研究区有较好的找矿前景。     

藏南沙拉岗锑矿流体包裹体红外显微测温研究

沙拉岗锑矿是藏南金锑成矿带内最具有代表性的锑矿床。为了更直接地了解该矿床的流体物理化学特征,本文利用红外显微镜对辉锑矿及紧密共生石英中的流体包裹体进行了显微测温研究。红外显微测温分析结果表明,辉锑矿中包裹体均一温度在134.9～221.9℃,峰值在160～190℃之间,盐度在1.7%～7.3%NaCleqv,峰值在5.0%～6.0%NaCleqv之间,密度在0.879～0.958g/cm3之间,平均值为0.934g/cm3;共生石英中包裹体均一温度在142.5～205.6℃,峰值在160～190℃之间,盐度在2.3%～7.0%NaCleqv,峰值在4.0%～6.0%NaCleqv之间,密度在0.910～0.947g/cm3之间,平均值为0.929g/cm3。通过对比研究认为沙拉岗辉锑矿及共生石英形成于同一物理化学条件,捕获同一成矿流体。结合石英中单个流体包裹体激光拉曼成分分析认为成矿流体为含微量CO2、N2、CH4气体的低温、低盐度和低密度的NaCl-H2O热液体系。成矿流体的沸腾作用是辉锑矿大量沉淀主要原因。     

RFID技术在数字城市建设中的应用

介绍了RFID的基本概念和特点,并对RFID技术进行详细地阐述,探讨了RFID技术在数字城市建设中的应用。     

多媒体电子地图集数据开放管理的设计与实践

作为一种新颖的地图集,多媒体电子地图集具有超乎以往的多媒体可视效果。为此本文将多媒体电子地图集的媒体数据管理权由编制者转向用户,以地理信息为主体,多媒体为支撑,提出一种便捷灵活的数据管理思路。同时,根据目前用户需求及计算机信息化特点,设计并实现了图集数据开放式管理系统,提高了图集的安全性、开放性、灵活性和易用性,以推进多媒体电子地图集的发展和应用。     

一个两时间层分裂显格式海洋环流模式(MASNUM)及其检验

A two-time-level, three-dimensional numerical ocean circulation model（named MASNUM） was established with a two-level, single-step Eulerian forward-backward time-differencing scheme. A mathematical model of large-scale oceanic motions was based on the terrain-following coordinated, Boussinesq, Reynolds-averaged primitive equations of ocean dynamics. A simple but very practical Eulerian forward-backward method was adopted to replace the most preferred leapfrog scheme as the time-differencing method for both barotropic and baroclinic modes. The forward-backward method is of second-order of accuracy, computationally efficient by requiring only one function evaluation per time step, and free of the computational mode inherent in the three-level schemes. This method is superior to the leapfrog scheme in that the maximum time step of stability is twice as large as that of the leapfrog scheme in staggered meshes thus the computational efficiency could be doubled. A spatial smoothing method was introduced to control the nonlinear instability in the numerical integration. An ideal numerical experiment simulating the propagation of the equatorial Rossby soliton was performed to test the amplitude and phase error of this new model. The performance of this circulation model was further verified with a regional（northwest Pacific） and a quasi-global（global ocean simulation with the Arctic Ocean excluded） simulation experiments. These two numerical experiments show fairly good agreement with the observations. The maximum time step of stability in these two experiments were also investigated and compared between this model and that model which adopts the leapfrog scheme.     

Incorporating uncertainty into the estimation of biological reference points for a spiny lobster (Panulirus penicillatus) fishery

The status of a fishery is often defined as the probability of fishing mortality rate exceeding a perilous level for long‐term sustainability. Lobster stock assessments are often subject to large uncertainty in input data and high levels of natural variability in lobster life history processes, which calls for incorporating uncertainty associated with both indicator and management reference points in an evaluation of biological risk of overfishing. Using a Monte Carlo simulation approach, we evaluated the impacts of uncertainty in modelling on the determination of the status of the Taitung spiny lobster (Panulirus penicillatus) fishery (Taiwan), which has not been quantitatively determined despite its commercial importance. The commonly used biological reference points derived from the per recruit model (F _0.1 the fishing mortality rate where the slope of the curve of yield‐per‐recruit model is 10% of the maximum slope and F _4Q%, the fishing mortality rate that reduces the expected egg production for a cohort of female lobsters to 40% of that produced in the absence of a fishery of the egg‐per‐recruit model) were influenced by uncertainties associated with lobster life history and fishery parameters. A large uncertainty in the current fishing mortality rate (F _cnr) and estimates of biological reference points (F _BRPs) increased the uncertainty in determining the risk of overexploitation throughout the confidence levels of the stochastic decision‐making framework. This simulation study suggests that the target reference point of F _40% is less sensitive to the input parameters’ uncertainty than F _0.1 We suggest a further evaluation of other F‐based references points and development of biomass‐based reference points before final selection and implementation for the management of the Taitung lobster fishery.     

实验室培养端足类日本大螯蜚对镉的毒理敏感性研究

沉积物毒性生物检测是沉积物环境质量评价重要内容之一[1].在沉积物毒性生物检测实验中,常用的受试生物有端足类(Amphipoda)、多毛类(Polychaeta)、软体动物(Mollusca)、棘皮动物(E-chinodermata)和枝角类(Cladocera)等中的部分种类[2-3].端足类是目前开展海洋沉积物毒性检测的优选受试生物,对其研究工作进行的最多,经验积累也最丰富,用其进行的有关沉积物毒性检测的方法也比较成熟[3].目前国外已有20多种海洋端足类用于沉积物毒性生物检测中.野生受试生物受季节、数量的限制不能满足检测工作的需要.     

极端事件再现时间长程相关性与群发性研究

利用百分位阈值方法定义极端事件,从极端事件再现时间的角度,研究了极端事件发生时间间隔的长程相关性.发现若原时间序列具有长程相关性,则它的极端事件再现时间序列也具有长程相关性;计算表明两者的标度指数α相当接近,这一特性与随机产生的再现时间序列有着本质的差别,再现时间序列的长程相关性是由原序列的长程相关性决定的.具有长程相关性的时间序列再现时间的概率分布明显不同于随机序列,其小值再现时间的概率较大,反映出极端事件的群发现象.本文根据这一特征定义了再现时间的群发性指数,发现时间序列的长程相关性是导     

水平轴潮流能叶轮尖速比特性分析研究

针对设计尖速比对水平轴潮流能叶轮动力特性的影响问题开展研究工作。基于叶素-动量理论建立叶轮动力特性仿真模型,以叶片数量分别为2、3、4的叶轮为对象,考察设计尖速比对叶轮的功率系数的影响。研究结果表明:设计尖速比越大的叶轮,其最大效率也越高;叶片数量多的叶轮,其功率系数略优于叶片数量少的叶片。结合分析结果,给出了水平轴潮流能叶轮的设计尖速比的选择建议。