The Transition to Potassic Alkaline Volcanism in Island Arcs: The Ringgit--Beser Complex, East Java, Indonesia

The origin of potassic lavas with within-plate characteristicsin island are settings is unclear. The volcanic complex of Ringgit—Beser,situated in eastern Java, has erupted lavas of both normal islandare calc-alkaline type and atypical potassic lavas, includingsome highly magnesian lavas. The occurrence of these primitivelavas gives an unusual insight into the source characteristicsof the potassic lavas. The lavas from Ringgit—Beser have a wide range of K₂O(1.1–6.4 wt. %) and MgO contents (18.0–1.6 wt.%).The most magnesian lavas have high Ni and Cr contents. The calc-alkalinelavas have incompatible trace element patterns typical of islandare lavas with enrichments in large ion lithophile elements(LILE) and light rare earth elements (LREE) relative to highfield strength elements (HFSE) and heavy REE (HREE). The potassiclavas may be divided into two series on the basis of Ba andNb contents, with the enriched potassic (EK) series having higherBa and Nb contents for a given MgO content than the potassic(K) series. The EK and K series lavas have some incompatibletrace element ratios similar to within-plate lavas (e.g., highCe/Pb, low LILE/HFSE ratios, and low B/Be). However, both theEK series and K series lavas have negative Ti and Zr anomalies,and the EK series lavas have high Ba/La similar to are lavas.There is little distinction in Sr and Nd isotopes between theK and EK series, but the calc-alkaline lavas have lower ₈₇Sr/₈₆Srand higher ₁₄₃Nd/₁₄₄Nd ratios than the potassic lavas. The EKseries lavas have lower ₂₀₆Pb/₂₀₄Pb and higher ₂₀₈Pb/₂₀₄Pb thanthe K series lavas, but similar ₂₀₇Pb/₂₀₄Pb ratios. The K serieslavas define an almost horizontal trend in ₂₀₇Pb–₂₀₆Pbspace. The Pb isotopic ratios indicate that the EK series lavasare derived from a single mantle source, whereas the K seriesoriginate from a mixture of two mantle components. Calc-alkalinelavas have Pb isotope ratios similar to other calc-alkalineand tholeiitic lavas from Java, and plot on a mixing line betweenIndian Ocean mid-ocean ridge basalt (MORB) and Indian Oceansediment. Incompatible trace element and Pb isotope data for the calc-alkalinelavas indicate that these lavas have a similar source to othercalc-alkaline lavas erupted in Java, namely melts of the IndianOcean MORB mantle fluxed by fluids from the subducted slab.The potassic lavas originate from enriched mantle sources withinthe wedge which have not been affected by recent subductionprocesses. The EK series lavas are derived from a metasomatizedzone which has EMI-type characteristics. The K series lavasare derived from mixing of melts from Christmas Island-type(EMII) mantle and the metasomatized zone. The metasomatizedzone is probably situated at the base of the lithosphere andthe Indian Ocean MORB and Christmas Island-type mantle componentsare situated in the asthenosphere of the wedge. Isotopic datafor Ringgit—Beser lavas confirm that the mantle wedgeof the Sunda arc is extremely heterogeneous (Foden & Varne,1980; Varne, 1985; Wheller et al., 1987). The similarity in geochemistry between Indonesian potassic lavasand those erupted in continental settings indicates that themagma source is essentially the same, namely a metasomatizedphlogopite-rich layer generated by melts of recycled subductedlithosphere. The lack of negative Ti anomalies in the continentalpotassic lavas is ascribed to lower oxidation states in themantle in continental settings.     

Symplectitic augite: evidence for discontinuous precipitation as an exsolution mechanism in Ca-rich clinopyroxene

Abstract Part of the augite in the Artfjället gabbro consists of symplectitic intergrowths between augite and blebs or lamellae of orthopyroxene. Mineral compositions are consistent with formation of these symplectites by exsolution of orthopyroxene from magmatic augite at a temperature of ca . 900–1000°C. The microstructures indicate that the exsolution mechanism is discontinuous precipitation, whereby the boundary of an augite grain sweeps through a neighbouring augite, leaving the symplectite in its wake. The formation of this symplectitic augite is catalysed by the presence of an intergranular water-rich fluid phase, which promotes grain boundary mobility.     

Interpretation of grain-size distributions from measured sediment data, Platte River, Nebraska

Breaks in the slope of log-probability plots of cumulative grain-size distributions of bed material are compared with frequency distributions of bedload and suspended sediment over a range of discharges at two stations on the Platte River in south-central Nebraska. The break between suspension and intermittent suspension as determined from the bed-material curve coincides with the upper limit of the grain-size overlap between bedload particles and suspended-sediment particles, whereas the break between intermittent suspension and traction corresponds to the grain size at the lower limit of overlap of bedload particles and suspended-sediment particles. Although grain-size distributions of bedload change little with discharge, the size of the coarsest grains in suspension increases with increasing discharge. Thus, the length of overlap of bedload and suspended-sediment distributions increases with increasing discharge. The limits of grain-size overlap of bedload and suspended-sediment distribution curves associated with near-flood discharges most closely approximate the breaks in the bed material grain-size distribution.     

Uranium Tailings Samples UTS-1 to UTS-4 of CCRMP

The Canadian Certified Reference Materials Project announces the availability of reference uranium tailings sample UTS-1, -2, -3 and -4. Eighteen laboratories participated in the interlaboratory program for total iron, titanium, aluminium, calcium, barium, uranium, thorium, total sulphur, sulphate and arsenic. Eight laboratories participated in the inter-laboratory program for thorium-230, radium-226, lead-210 and polonium-210 in all four samples and for thorium-232, radium-228 and thorium-228 in UTS-1 and UTS-2.     

Stratigraphy and Petrology of the Mulcahy Lake Layered Gabbro: An Archean Intrusion in the Wabigoon Subprovince, Ontario

The Mulcahy Lake gabbro is an Archean layered intrusion of tholeiiticbulk composition located in the Wabigoon subprovince. The intrusionis 6 km thick at the thickest and is exposed over an area of63 km². It intrudes basaltic to siliceous volcanics of the CrowLake-Savant Lake greenstone belt and is intruded by the Atikwabatholith. Zircon U-Pb data indicate crystallization at 27322+1·0/–0·9m·y. Principal phases are plagioclase, orthopyroxene, augite (andpigeonite in iron-rich rocks), olivine, hornblende and magnetite.Olivine is confined to several horizons. Apatite and then zirconare prominent accessory phases at advanced stages of fractionation.Plagioclase, pyroxenes and olivine are cumulate phases. Hornblendeis invariably an intercumulus phase. Magnetite is ubiquitousthroughout the intrusion, generally as a cumulate phase, andforms centimeter thick layers in fractionated rocks. Fractionationfollowed a tholeiitic trend with iron enrichment in the liquid. The intrusion is divided into lower, mixed, middle, upper andmarginal zones. The lower and middle zones are 2·0 and2·5 km thick respectively. The upper zone is approximately1 km thick, and the marginal zone is measured in hundreds ofmeters. A 200 m thick mixed zone is interposed between the lowerand middle zones. The base of the lower zone consists of ultramaficunits containing olivine of Fo₈₂. The top of the zone has olivineof Fo₂₈. Fractionation of the lower zone, from the floor up,was interrupted by the introduction of pristine liquid whichmixed with more dense and cooler residual liquid in the chamberto form the mixed zone. Further introduction of several minorpulses of liquid constructed the lower part of the middle zone.The upper part of the middle zone was constructed from a majorpulse of liquid plus several minor pulses each of which is representedby reversals in cryptic layering. The upper zone consists ofultramafic to iron-rich gabbro cumulates formed by cooling throughthe roof plus horizons formed by influx of pristine liquid.Marginal zone rocks represent cooling through the walls of theintrusion. Rhythmic layering is well developed in lower and middle zonecumulates. Petrofabric data show that orthopyroxene has a lineationin the plane of layering and parallel to structures suggestiveof flow. Plagioclase laths also have a preferred orientationin many cumulates and in unlayered gabbros as well. Flow, possiblylaminar, of liquid-crystal material is suggested and may belinked to the ultimate development of layering. Pressure during the course of crystallization probably was greaterthan 2 and less than 5 kb. Temperatures estimated from pyroxenesvaried from approximately 1200 to 1000 °C.f_o², is not wellconstrained but was sufficient to allow the formation of thinlocal magnetite cumulates late in the crystallization. The primarymelt was hydrous as indicated by the presence of hornblende.It is very unlikely that the melt was saturated with water duringcrystallization of the cumulate phases.     

Petrogenesis of the Kinsman Intrusive Suite: Peraluminous Granitoids of Western New Hampshire

The Kinsman Intrusive Suite occurs in six major plutons of westernNew Hampshire, covering a total area of 2240 km². It is an Acadian-agesyntectonic gneissic S-type peraluminous granitoid, rangingin composition from quartz diorite to granite. Much of the Kinsmanis characterized by very large (up to 120 mm in maximum dimension)megacrysts of alkali feldspar, but the bulk chemistry of therocks indicates that these cannot be phenocrysts crystallizedfrom initially homogeneous melts. Locally, there is abundant(20 per cent) almandine-rich garnet, and graphite is a commonaccessory.In contrast to the unannealed orthoclase in surroundingmetapelites, the alkali feldspar of the Kinsman has, for themost part, inverted to maximum microcline. The garnets havecore temperatures in the range of 800 to 900 ?C, and are pseudomorphedby, or show reaction rims to, biotite. Plagioclase commonlyshows zoning, some of it oscillatory. These features are magmaticin nature, and argue against the conclusions of previous investigatorsthat the mineralogy and textures of the rock are due to regionalmetamorphism of a previously-crystallized two-mica granitoidwhich has undergone prograde reactions such as:muse + bio +3 qtz 2 Kfs + gar + 2H₂O.The intrusives have also producedrecognizable contact-metamorphic features in the wallrocks andare probably coeval with the dominant M2 Acadian metamorphism.Majorelement analytical data for the Kinsman suite has been examinedby least squares mixing-model and extended Q-mode factor analysis.These calculations, supported by consideration of REE data,suggest that the most likely origin for the Kinsman magmas isby deep-crustal anatexis of slightly calcareous metapelites,and involves a reaction such as:bio + Al₂SiO₅ + qtz + feldspars gar + cord + Kfs + plag + melt.In non-calcareous pelites thisreaction produces a water-undersaturated peraluminous melt attemperatures above 700 ?C, and allows for the early crystallizationor recrystallization of K-feldspar, plagioclase, and garnetin a crystal-liquid mush or migma. Geochemically, garnet + plagioclaseare treated as restite, and a minimum-melt granite as the magmain the Q-mode and mixing-model calculations. The variabilityin chemistry of the Kinsman Intrusive Suite is best explainedon the basis of mixing of leucogranitic anatectic melts withgarnet-plagioclase restitic material and a quartz-feldspar-sillimanite-biotiterock, but only very slightly affected by crystal settling.     

Deep marine arc apron deposits and syndepositional magmatism in the Alisitos group at Punta Cono, Baja California, Mexico

Rocks exposed at Punta Cono include very fine-grained to coarse-grained tuffs, lapilli tuffs, and tuff breccias deposited in a deep marine environment. Syndepositional basaltic intrusive activity was common. In one locality a hyaloclastite-peperite complex formed. Slumped sections with fluidal basalt ‘clasts’, derived from intrusions that entered the sediment pile from below, are present elsewhere. Abundant soft-sediment folds in fine-grained laminated subaqueous fall-out tuff suggest steep gradients; these are cut by shallow channels filled with coarse-grained tuff, lapilli tuff, and rare tuff breccia. The combination of marine fossils, extreme textural immaturity, abundant slump features, and syndepositional magmatism indicates deposition upon the submarine flanks of an active volcano. Recognition of magma-wet sediment interaction is hampered in volcaniclastic rocks because of the similarity between host and intrusive fragments. Products of magma-water-sediment interactions at Punta Maria include: (1) jigsaw-puzzle hyaloclastite, formed by non-explosive hydroclastic fragmentation of magma upon contact with water and water-bearing sediment; (2) peperites, produced by mixing of magma with sediment; and (3) an unusual tuff breccia unit, the result of non-explosive mixing of ‘wisps’of lava with sediment during remobilization of an unconsolidated section. Low-explosivity magma-water-sediment interactions are favoured by relatively high hydrostatic pressures in sub-wave base settings.     

THE INFLUENCE OF PERMEABILITY ON COMPRESSIONAL WAVE VELOCITY IN MARINE SEDIMENTS*

To investigate the effect of permeability on the propagation of seismo-acoustic waves through marine sediments, a theoretical model based on Biot's equations is established which relates the compressional wave velocity measured at a fixed frequency to computed velocities at zero and infinite frequencies in terms of sediment porosity and permeability. The model is examined experimentally in a standard soil mechanics consolidation test (itself dependent, among other things, on sediment porosity and permeability) which has been modified to include measurements of compressional wave velocity at 1 MHz and shear-wave velocity at 5 kHz. This test allows the elastic modulus of the sediment frame to be assessed under different load conditions simultaneous with the velocity determinations. From a number of tests on different samples, five samples are chosen to typify the range of sediment sizes. The results show that the difference between the measured velocity at 1 MHz and the model-derived velocity at zero frequency increases with increasing particle size (from clays to fine sand), with decreasing porosity, and with increasing permeability. For sediments coarser than fine sand the simple model breaks down, possibly because of the dominance of scattering/diffraction effects at the high frequency of the experiment. Within this limitation the model seems satisfactory to offer a capability of predicting the permeability of a sea floor sediment to an order of magnitude by the in situ measurement of seismic velocities over a wide range of frequencies; the prediction process requires a good in situ determination of sediment porosity such as that offered by electrical formation factor measurements.     

Scanning electron microscopy of Pleistocene tills in Estonia

Tills from four Pleistocene glaciations were recovered from drill cores in Estonia and subjected to particle size and microtexture analyses by Scanning Electron Microscope (SEM). All tills were deposited by thick continental ice-sheets following the transport of, at most, several hundred kilometers during four Fennoscandian glaciations. The main problem is to determine if the type and range of microtextures present on the grain surfaces are diagnostic of transport in continental ice. The frequency of occurrence of microtextures including fractures, abrasion, and relief features are used to test the ability of continental ice to damage quartz particles emplaced as till. The range of quartz dissolution and presence of coatings on grains are also used to reconstruct the paleoenvironment that existed prior to transport as well as to estimate diagenetic effects that occurred following emplacement. The available data indicate a high degree of reworking of quartz grains from one glaciation to another. While the shapes and microtextures of grains from source rocks are not known, the great range of fracture and abrasion microfeatures, and high frequency of occurrence on grains in all tills, indicate that glaciers are effective crushing agents. An increase in the prevalence of chemically etched grains from older to younger tills suggests that some grains ( c . 50%) escape crushing, either because of preservation in the ice and lack of grain-to-grain contact, or as a result of massive reworking of weathered grains following interglaciations.