用ERS风散射计数据估算土壤水分方法的研究

欧空局ERS1/2卫星上的风散射计(WSC),分辨率是50km,4天内能覆盖全球超过80%的范围,并可在多角度下对地物目标进行观测。本文研究利用该散射计数据估算土壤水分的方法。首先,利用基于ERS散射计数据建立的全球C波段雷达后向散射系数数据库,根据传统的几何光学模型(GOM),反演得到与土壤含水量密切相关的法线方向Fresnel反射率,并与两个采样点(安多和那曲)上的实测降雨量及土壤水分相对比,证明了ERS散射计数据与土壤水分的高相关性;第二步,以水云模型为基础,结合AIEM模型,发展了一种简化模型来估算土壤水分绝对值,分别利用气象站实测点数据和同时期的Basist湿度指数(BWI)进行验证,表明反演结果能较好反映土壤水分的空间分布状况。     

热敏直接制版与数码打样技术

CTP(计算机直接制版)技术,特别是热敏直接制版技术已经在世界范围内得到了广泛应用,它是印刷工业发展的大趋势。在某种程度上说,CTP技术推动了数码打样技术的发展,数码打样设备成了CTP系统必需配备的关键设备。针对CTP技术和数码打技术以及二者的关系进行了介绍与讨论,进一步对数码打样技术的应用进行了理论上和实践上的探讨。另外,在CTP环境下,比较细致地分析和讨论了如何输出数码打样来模拟胶印效果,通过多次数码打样实验、数据分析与校正,最终数码打样与胶印结果非常接近。     

基于手持GPS洞庭湖区植被景观格局外业调绘研究

本文以1：50000的地形图为工作底图，采用手持GPS技术、利用实地调查与分解森林资源分布图相结合的方法，对洞庭湖区植被分布状况进行了外业调绘的研究。建立了外业调绘过程中植被群落斑块最小面积和边界的确定原则及其斑块类型与编码。探讨了手持GPS实现WGS-84坐标系向1954北京坐标系的转化方法。并进行了精度估算，其点位误差≤5．8m，完全可以满足洞庭湖区植被分布外业调绘的精度要求。运用该方法进行植被分布的外业调绘，可以解决运用传统的定位测量方法在湖区定位难的问题，提高了外业作业效率。     

MCZT在气枪震源信号频谱分析中的应用

气枪震源信号是短时非平稳信号,采用频谱细化算法能提高频谱分析的准确性。首先进行了改进线性调频Z变换(MCZT)和FFT两种频谱分析算法的误差仿真计算,然后进行气枪震源的水下子波信号和地震波信号的对比计算。结果表明MCZT计算误差较小、计算时间较少,能有效提高气枪震源信号频率和幅度特征提取的准确性,是气枪震源信号频谱特征分析的一个有效方法。     

首批证认8个密云射电源为BLLac天体和类星体

为了深入研究密云射电源表分类样本的性质,作为系列工作的第一部分,选出了一个２３２～４８５０ＭＨｚ平谱源样本．１９９８年５月２９至３１日,利用北京天文台２．１６米望远镜和ＯＭＲ摄谱仪,对其中１８个目标进行了观测及光谱认证．结果共证认出１５个ＡＧＮ,其中３个信噪比不小于８的ＢＬＬａｃ天体和５个类星体（最大红移为２．５１９±０．００３）是新发现的．     

北京地区Pi2型地磁脉动的初步分析

本文利用北京白家疃地磁台1977年4月至1978年3月的地磁脉动记录,使用最大熵值法（MEM）,对主要发生在夜间、短序列的Pi2型无规脉动进行了功率谱分析,同时使用复解调法分析了偏振特性。最后,根据磁层的磁流体振荡理论对Pi2型脉动的产生机制进行了初步讨论。     

COULOMB STRESS CHANGE ON ACTIVE FAULTS IN SICHUAN-YUNNAN REGION AND ITS IMPLICATIONS FOR SEISMIC HAZARD

Coulomb stress change on active faults is critical for seismic hazard analysis and has been widely used at home and abroad. The Sichuan-Yunnan region is one of the most tectonically and seismically active regions in Mainland China, considering some highly-populated cities and the historical earthquake records in this region, stress evolution and seismic hazard on these active faults capture much attention. From the physical principal, the occurrence of earthquakes will not only cause stress drop and strain energy release on the seismogenic faults, but also transfer stress to the surrounding faults, hence alter the shear and normal stress on the surrounding faults that may delay, hasten or even trigger subsequent earthquakes. Previously, most studies focus on the coseismic Coulomb stress change according to the elastic dislocation model. However, the gradually plentiful observation data attest to the importance of postseismic viscoelastic relaxation effect during the analysis of seismic interactions, stress evolution along faults and the cumulative effect on the longer time scale of the surrounding fault zone. In this paper, in order to assess the seismic hazard in Sichuan-Yunnan region, based on the elastic dislocation theory and the stratified viscoelastic model, we employ the PSGRN/PSCMP program to calculate the cumulative Coulomb stress change on the main boundary faults and in inner blocks in this region, by combining the influence of coseismic dislocations of the M≥7.0 historical strong earthquakes since the Yongsheng M7.8 earthquake in 1515 in Sichuan-Yunnan region and M≥8.0 events in the neighboring area, and the postseismic viscoelastic relaxation effect of the lower crust and upper mantle. The results show that the Coulomb stress change increases significantly in the south section of the Xianshuihe Fault, the Anninghe Fault, the northern section of the Xiaojiang Fault, the southern section of the Longmen Shan Fault, the intersection of the Chuxiong-Jianshui Fault and the Xiaojiang Fault, and the Shawan section of the Litang Fault, in which the cumulative Coulomb stress change exceeds 0.1MPa. The assuming different friction coefficient has little effect on the stress change, as for the strike-slip dominated faults, the shear stress change is much larger than the normal stress change, and the shear stress change is the main factor controlling the Coulomb stress change on the fault plane. Meanwhile, we compare the Coulomb stress change in the 10km and 15km depths, and find that for most faults, the results are slightly different. Additionally, based on the existing focal mechanism solutions, we add the focal mechanism solutions of the 5 675 small-medium earthquakes(2.5≤M≤4.9)in Sichuan-Yunnan region from January 2009 to July 2019, and invert the directions of the three principal stresses and the stress shape factor in 0.1°×0.1° grid points; by combining the grid search method, we compare the inverted stress tensors with that from the actual seismic data, and further obtain the optimal stress tensors. Then, we project the stress tensors on the two inverted nodal planes separately, and select the maximum Coulomb stress change to represent the stress change at the node. The results show that the cumulative Coulomb stress change increase in the triple-junction of Sichuan-Yunnan-Tibet region is also significant, and the stress change exceeds 0.1MPa. Comprehensive analysis of the Coulomb stress change, seismic gaps and seismicity parameters suggest that more attention should be paid to the Anninghe Fault, the northern section of the Xiaojiang Fault, the south section of the Xianshuihe Fault, the southern section of the Longmen Shan Fault and the triple-junction of the Sichuan-Yunnan-Tibet region. These results provide a basis for future seismic hazard analysis in the Sichuan-Yunnan region.     

Ulysses的观测与太阳风加速机理初议

Ulysses 是迄今为止第一次沿独特的日球纬度方向考察日球高纬度空间区域的飞船。本文描述了 Ulysses 飞船的部分主要观测结果,并进行了分析,在 Ulysses 飞船穿越太阳南,北极之前,科学家们提出了各种不同的太阳风速度、磁场等参量的纬向变化模型。分析表明,这些模型都不能解释 Ulysses 飞船的观测结果。Ulysses 飞船的观测对经典的太阳风理论提出了挑战,太阳风的加热与加速是一个远没有被解决的问题。观测与分析表明,经典热传导不可能驱动高速流,太阳风的加速伴随着加热的发生,而加热率大小可能与离子的回旋频率有关;太阳风的热源可能不是单一的形式,而且不同形式的热源对太阳的加热贡献大小与日球径向距离有关。本文讨论并分析了几种可能的太阳风加热与加速机制。     

一种基于相位的相对延迟变化测量方法

详细地介绍了VLBI系统的地面单元中电缆延迟变化的测量方法，这种基于相位的测量方法，为相关领域的高精度延迟测量提供了借鉴。概要介绍了地面单元中电缆测量、反射调制以及相位比较器的工作原理，对各个环节作了数学上的推导分析。给出了一个电缆相对延迟值随温度变化的测试样本。