考虑流固耦合的渡槽结构三维碰撞反应研究

渡槽结构在强烈地震作用下邻梁间发生的碰撞现象易对其输水安全造成重大影响。采用薄壁梁段单元和三维接触-摩擦单元借助FORTRAN程序建立了考虑流固耦合的渡槽结构整体三维碰撞分析模型,并通过工程实例进行了多工况下的地震碰撞反应分析。结果表明,随着槽内水深的增大,渡槽结构的地震反应普遍增大,邻梁碰撞次数、碰撞力和相对转角也随之增大;槽内水体固结和考虑流固耦合的碰撞反应峰值相差不大,但时程曲线差异较大,某些部位水体固结的解会小于流固耦合解,使固结简化的处理偏于不安全。研究结果可供大型渡槽结构抗震设计参考。     

江苏地震灾害的特点及其思考

简要回顾了江苏地震灾害的基本情况,介绍了该地区地震灾害的特点,从加强开展地震科普教育,加强农村建筑物抗震设防标准和施工质量的建设、地震紧急救助体系建设以及非政府组织参与防震减灾工作四个方面进行了思考,提出做好防震减灾工作的建议.     

基于地震信号波形形态差异的面波噪声稀疏优化分离方法

实际地震信号通常可表示为具有波形特征差异的多种基本波形信号的线性组合,如叠前道集中的工频干扰噪声与有效波信号、面波噪声与体波信号等.选择单一数学变换方法,往往不易实现地震信号的稀疏表示.近年来发展的形态成分分析理论,通过联合多种数学变换,可实现对复杂信号的稀疏表示.本文根据单道地震记录中面波与体波信号波形结构特征的差异性,提出一种基于形态成分分析的面波噪声衰减方法.针对面波的低频、窄带以及频散特性选择一维平稳小波变换作为其稀疏表示字典,而针对体波波形的局部相关特性选择局部离散余弦变换作为其稀疏表示字典,建立基于双波形字典的形态成分分析模型,通过求解该稀疏优化问题获得最终的信噪分离结果.理论模型和实际地震资料处理证实该方法不仅能够衰减单炮地震记录中的强面波干扰噪声,同时能够更好地保护有效信号的波形特征与频谱带宽,为地震资料的后续处理和分析提供良好的数据基础.     

内编队重力场测量系统轨道参数与载荷指标设计方法

内编队系统通过构造内卫星纯引力轨道完成高精度重力场测量,实现了不依赖于加速度计的重力卫星实施新途径.针对内编队系统轨道参数和载荷指标设计任务,从定性的角度分析了轨道高度、轨道倾角、偏心率等轨道参数的选择原则,以及外卫星定轨精度、内外卫星相对状态测量精度、内卫星非引力干扰抑制精度、系统采样率等载荷指标对内编队重力场测量性能的影响,并建立了这些参数之间的匹配关系.为获取内编队系统轨道参数和载荷指标的定量设计结果,给出了内编队重力场测量数据模拟和反演计算方法.结合轨道参数和载荷指标对重力场测量性能的影响及其匹配关系,提出了由解析推导和数值计算相结合的方法,获取重力场最高反演阶数、大地水准面精度、重力异常精度等重力场测量性能与轨道参数、载荷指标之间的解析关系,并给出了该解析关系的具体数学形式.与解析法、半解析法相比,该公式由解析推导和大量数值计算得到,因而考虑的影响因素更加全面,计算结果更加合理,可用于快速准确设计内编队系统轨道参数和载荷指标.     

多源遥感技术在汶川震后高精度数字高程模型重建中的精度分析

汶川地震后,震中地区地表形态遭到很大破坏.在该地区开展科学研究急需高精度数字高程模型支持,重建震区数字高程模型十分必要.本文以高精度重建该地区数字高程模型为目标,综合ALOS PRISM获取的三轨立体像对、ALOS PALSAR雷达影像和欧空局发布的汶川地震ENVISAT雷达影像等资料,采用光学遥感立体测图技术、InSAR技术,并融合已有全球数字高程模型,研究建立覆盖此地区15m分辨率的数字高程模型.在利用中国地壳运动监测网络和陆态网络工程项目实测的GPS数据进行高程精度分析后表明:ALOS PRISM DEM精度优于10 m(95％置信度);ALOS PALSAR DEM精度优于10 m(95％置信度),而ENVSAT ASAR DEM在平原、丘陵地区精度优于20 m(95％置信度).研究证明:ALOS PRISM能进行高精度的地形测量,ALOS PALSAR在山区仍可获得高精度数字高程模型,ENVISAT ASAR在平原地区的精度较高.因此融合光学、雷达遥感技术完全满足获取高精度、高分辨率震区数字高程模型的需要,这为在困难地区建立高精度数字高程模型提供了一个很好的途径.     

Paleomagnetic data from the Late Carboniferous-Late Permian rocks in eastern Tibet and their implications for tectonic evolution of the northern Qiangtang-Qamdo block

We report paleomagnetic results from the Late Carboniferous-Late Permian strata in eastern Tibet (China), and aim to clarify the tectonic and paleogeographic evolution of the northern Qiangtang-Qamdo block, which is the key to the study of plate boundary between the Gondwanaland and the Eurasia during the late Paleozoic. Two hundred and nineteen samples-including limestone, muddy siltstone, basalt, lava, and tuff-were collected at 24 sites in the Upper Carboniferous and Middle-Upper Permian successions. A systematic study of rock magnetism and paleomagnetism yields three reliable paleomagnetic pole positions. Both hematite and magnetite occurred in the Late Carboniferous limestone samples. The demagnetization curve shows a characteristic double-component, with the remanent magnetization (ChRM) exhibiting a positive polarity (negative inclination). In the Late Permian limestone, tuff, and basalt, magnetic information were recorded primarily in magnetite, although a small fraction of them was found in hematite in basalt. The demagnetization curve illustrates a double or single component, with the ChRM showing a negative polarity (positive inclination), which has passed the classic fold test successfully. The single polarity features of the ChRM directions of the Late Carboniferous and Middle-Late Permian rocks are respectively related to the Kiaman positive and reversed polarities under the stratigraphic coordinates. This, in turn, indicates that both ChRMs directions represent the original remanence directions. By comparison with the previously published paleomagnetic results from the late Paleozoic rocks in the northern Qiangtang Range, we suggest that: (1) Qamdo and northern Qiangtang block were independent of each other during the Late Carboniferous to the Early Permian periods. The north Lancangjiang ocean basin between the two blocks may have closed before the Middle Permian and been involved in the continent-continent collision stage in the Late Permian-Early Triassic periods. (2) The northern Qiangtang-Qamdo Block paleogeographically was situated at low to intermediate latitudes in the Southern Hemisphere in the Late Carboniferous-Late Permian periods, and began to displace northward in the Early Triassic, with an amount of more than 5000 km northward transport from its current location.     

The bedform morphology of Chinese sturgeon spawning sites in the Yangtze River

Quantitative measures of the relationships between channel morphology and the habitat use of Chinese sturgeon(Acipenser sinensis) can help management and regulatory agencies to quantify potential spawning habitats and develop recovery goals in view of the decreasing area of sturgeon spawning habitat.This study determined the specific bedform types at the pool-riffle scale and evaluated the slopes,aspects and bed load gradation composition of Chinese sturgeon spawning areas in the Yangtze River,China.A bedform differencing technique was used to objectively quantify the longitudinal riverbed profile into four distinct pool-riffle units that were independent of discharge.The vertical location of thalweg points within these units was quantified with a riffle proximity index.Chinese sturgeon spawning areas were mapped and correlated with the pool-riffle units,slopes and aspects.The results indicate that Chinese sturgeon spawning areas occur primarily in riffles.The majority of Chinese sturgeon spawning occurred at elevations greater than 75%of the difference in elevation between the nearest riffle crest and the pool bottom.The slope of spawning sites was distributed between 0.05 and 6.36,and the average aspects were 219.92 and 207.63,respectively.The bed load is mainly composted of gravel and pebble,sediment diameter concentrated on 50-500mm.These analyses of bedform morphology will assist regional fish managers in quantifying existing and potential Chinese sturgeon spawning habitats and will provide a quantitative framework for evaluating general ecological implications of channel morphology in the Yangtze River.     

老挝波乔省某磁铁矿区磁法勘探

勘查区位于老挝西北部之波乔省,地表风化严重、浮土掩盖厚、深林茂密、基岩露头少,虽然局部地段出露有大量的铁帽,但不敢判断该区是否有大规模的磁铁矿.为此,我们采用1∶10000地面高精度磁法测量以了解磁铁矿的有无、范围、延伸、规模.后期勘探阶段开展2.5D人机交互正反演工作以了解深部磁铁矿的有无.结果表明,在老挝西北部地质勘查程度低的地区开展高精度磁测扫面工作是寻找磁铁矿产行之有效的方法,能够解决基础地质问题,矿山勘查问题,后期运用2.5D人机交互正反演能够解决一定的矿层预测工作.     

花管土钉抗拔力学模型研究

花管土钉已被广泛应用于基坑工程中,但其抗拔承载机理尚不明确。根据花管土钉的支护原理,分析其三种破坏形式,提出花管土钉的四个受力阶段;基于库仑土压力理论,将滑动土体上方看作均布荷载,推导出花管土钉极限抗拔承载力的计算公式;结合兰州某基坑实例,将《建筑基坑支护技术规程》中的花管土钉极限抗拔承载力计算方法与本文计算方法进行拉拔试验,并对结果进行对比分析。研究表明：花管土钉的破坏模式主要为花管杆体被拉断、出浆锚固体被剪断及出浆锚固体前端土体变形过大;花管土钉的四个受力阶段包括静止阶段、塑性区产生阶段、塑性区扩张阶段和破坏阶段;在花管土钉极限抗拔承载力的组成中,出浆锚固体提供的抗拔力所占比重随花管埋深的增大而显著增大,是花管土钉极限抗拔承载力的重要组成部分。     

泉州地震台数字地震仪台址的地脉动噪声分析

利用2008年泉州台甚宽频带数字地震仪连续48 h和全年每月连续48 h内白天与夜间各连续4 h的地脉动记录,计算5 Hz、5 s和100s的静态地脉动噪声功率谱密度、1/3倍频程1-20Hz带宽各段的平均静态地脉动噪声有效值、1/3倍频程100-30 s带宽各段的平均静态地脉动加速度噪声有效值,以及上述3个频点和2个...