Zircon U–Pb–Hf isotopes and geochemistry analyses of the Huyu igneous rocks in northwestern Beijing,China: possible new evidence for the initial destruction of the North China Craton

The timing and extent of cratonic destruction are crucial to understanding the crustal evolution of the North China Craton (NCC). Zircon U–Pb–Hf isotope data and the whole-rock major and trace element characteristics of the Huyu igneous rocks in northwestern Beijing, China, provide possible new evidence for the initial destruction of the NCC. The igneous rocks occur as several sills and dikes, including lamprophyre, monzonite porphyry, and aplite. The lamprophyres have high Mg^# and K₂O contents. The monzonite porphyries have high Mg^#, high K₂O contents, and negative ε_Hf(t) values with zircon U–Pb ages of 225.5–227.7 Ma. These two types of rocks are both enriched in large ion lithosphere elements (LILEs) and light rare earth elements (LREEs) but are depleted in high field strength elements (HFSEs) and high rare earth elements (HREEs) and have almost no Eu anomalies and relatively high total rare earth element (ΣREE) contents. In contrast, the aplites exhibit high silica and K₂O contents, low MgO contents, and more negative ε_Hf(t) values with a zircon U–Pb age of 206.2 Ma. The aplites are also enriched in LILEs and LREEs but are depleted in HFSEs and HREEs, with strongly negative Eu, Ti, P, La, Ce, and Sr anomalies and relatively low ΣREE contents. These results indicate that the lamprophyres and monzonite porphyries represent a continuous cogenetic magma evolution series after melt derived from an enriched metasomatized lithospheric mantle experienced crust assimilation and fractional crystallization. The aplites were produced by the fractional crystallization of low-Mg parental magma derived from melting of the ancient Archaean crust. The occurrence of the Huyu intrusive rocks with many other plutons of similar ages on the northern margin of the NCC suggests that the northern NCC entered an intraplate extensional tectonic environment in the Late Triassic.     

新疆伊吾县宝山铁矿床矽卡岩成因研究

宝山铁矿床位于东准噶尔库兰卡孜干-北塔山-纸房-琼河坝岛弧带东段。宝山铁矿中矽卡岩与铁矿体密切共生,是重要的找矿标志。研究区矽卡岩中石榴子石、透辉石单矿物电子探针分析结果显示,石榴子石属于钙铁榴石-钙铝榴石系列,透辉石属于透辉石-钙铁辉石系列。矽卡岩中高场强元素(如Nb、Ta、Zr、Hf)相对亏损,稀土元素表现出LREE富集,HREE亏损的特点。∑REE为39.90×10~(-6)~178.43×10~(-6),∑LREE/∑HREE比值1.64~7.53,(La/Yb)N比值为1.32~10.10,轻、重稀土元素分异程度较弱,与玄武质凝灰岩具有相似的地球化学特征,这说明矽卡岩是玄武质凝灰岩受后期岩浆热液改造形成,随着温度和压力降低,磁铁矿沉淀形成铁矿体。     

A temporal analysis of the association between breast cancer and socioeconomic and environmental factors

Although some biological factors have been confirmed to increase the risk of breast cancer, they only account for a small portion of the overall incidence in females. Women’s socioeconomic status and hazardous exposures to potential breast cancer carcinogens could modify their risks of breast cancer. From a public health perspective, it is important to understand what socioeconomic and environmental factors are associated with an elevated risk of breast cancer and how they vary geographically, temporally, and among different populations. Using an integrated approach, this study examines the associations between the incidence rate of invasive breast cancer and socioeconomic characteristics and environmental risks over time in Illinois for two periods: 1999–2003 and 2009–2013. Based on data from the US Census, ACS, and EPA, this study builds two sets of regression models to investigate the associations. The findings reveal that compared to environmental risks, socioeconomic factors are much more significant factors associated with the risk of breast cancer. The significant explanatory variables differ somehow between the two periods, yet with some agreement. Among the environmental risk variables examined, two toxic carcinogens, ethylene oxide and benzene were associated with an elevated risk of breast cancer for each time period respectively.     

3D打印技术在矿床学中的应用研究——以内蒙古乌力吉敖包萤石矿Ⅲ号矿体为例

3D打印(3D printing)是一种以三维模型为样本的快速成形技术,它通过逐层打印或粉末熔铸的方式来构造需要的立体图形。本文从3D打印技术的原理及其发展现状入手,重点列举内蒙古乌力吉敖包萤石矿,利用3D打印机打印具有现实可观性的地质体实体,探讨3D打印技术作为新兴的科技手段应用于矿床学教学与研究的应用价值和发展前景。研究发现,3D打印技术在矿体三维可视化中的应用符合地质图件立体化和3D打印技术多领域化的趋势,未来3D打印技术在地质领域的应用也有助于开拓矿床学教学和研究的新方式与新思路。     

Petrophysical characterisation of tight sandstone gas reservoirs using nuclear magnetic resonance: a case study of the upper Paleozoic strata in the Kangning area,eastern margin of the Ordos Basin,China

Residual and movable porosity are significant parameters for characterising petrophysical properties, especially in tight reservoirs. Eight tight sandstone samples from the upper Paleozoic gas-bearing strata in the Kangning area, from the eastern margin of the Ordos Basin, were analysed using nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), petrography, and porosity and permeability tests. The lithology and pore types were identified and classified using petrography and SEM. The residual and movable porosity were obtained with NMR. In addition, NMR was used to visualise pore structure and pore size distribution. The results suggest that the upper Paleozoic sandstones in the study area mainly comprise feldspathic litharenite and litharenite. The sandstone porosity and permeability are low, with means of 5.9% and 0.549 mD, respectively. Four pore types exist in the tight sandstones: residual primary pores, grain dissolution pores, micropores (clay-dominated) and microfractures. The T₂ spectra under water-saturated conditions correlate with pore size and can be used to distinguish small and large pores based on the transverse relaxation time cutoff value of 10 ms, which corresponds to a pore diameter of 0.232 μm. Small pores account for 72% of the pores in the tight sandstones. The continuous bimodal T₂ spectra suggest good connectivity between small and large pores, despite the low porosity and permeability. In this study, the movable porosity of the major tight sandstone gas reservoirs is higher than the residual porosity, which confirms the effective evaluation of movable porosity to tight sandstone reservoirs, based on NMR experiments.     

Correction to: Assessing real options in urban surface water flood risk management under climate change

Windblown dust originating in China and Mongolia causes health effects and agricultural damage in its source areas and causes Asian dust events in Japan. An early warning system that could be combined with weather forecasts would be helpful in preventing serious damage. However, it is difficult to specify source areas of dust with current dust modeling systems because land surface information, including vegetation coverage and land surface soil water content, is inadequate. To find and monitor dust source regions, a semi-real-time dust erodibility map was developed based on MODIS satellite data that focuses particularly on the threshold wind speed in a target area of northeast Asia including China and Mongolia (35°–50°N, 75°–120°E). The mapping system incorporates satellite data on snow cover, areas of frozen soil, surface soil water content, and vegetation cover.     

新特提斯洋俯冲起始的地质记录:土耳其南部蛇绿岩和变质底板

在现行板块构造理论的框架下,板块的初始俯冲是岩浆活动和构造运动发生转变的重要过程,亦是理解板块运动的关键节点。在俯冲起始过程中,主要存在四个方面的地质记录,分别为一系列地球化学成分多样的岩浆活动、SSZ型蛇绿岩、变质底板和玻安岩及其对应的铬铁矿床。特提斯造山带作为公认的研究板块构造理论尤其是初始俯冲的关键场所,一直备受地学界的重视。而土耳其南部构造带作为特提斯造山带的重要组成部分,亦是确定亚欧板块和阿拉伯板块之间缝合线存在的重要标志。该南部构造带是研究新特提斯洋俯冲起始的理想场所,上述关于俯冲初始的四个地质记录均保存良好,且有如下方面的重要特点:1)不同地区的镁铁质岩石甚至同一地区的镁铁质岩石具有不同的地球化学特征,从似洋中脊玄武岩,到过渡型岩石类型和玻安质岩石均有发育; 2)大部分蛇绿岩具有完整的序列,各单元及变质底板岩石中普遍发育侵入的基性岩脉,产状多变,是多期岩浆事件的产物; 3)蛇绿岩下部通常发育一套角闪岩相变质底板,且其年龄与蛇绿岩的形成年龄基本一致; 4)蛇绿岩中普遍发育铬铁矿床,以高Cr型为主,部分蛇绿岩中还赋存高Al-高Cr的过渡型铬铁矿,均被认为是幔源岩浆与地幔橄榄岩反应的产物。因而,这些地质体完整记录了新特提斯洋形成-俯冲-消减的演化过程。     

南阿尔金泥盆纪中基性杂岩体的成因及其地质意义研究

出露于南阿尔金西段的塔什萨依辉长岩和闪长岩及其内花岗质细脉是古生代多期岩浆活动的产物,它们构成了南阿尔金俯冲碰撞杂岩带的一部分,是深入探讨该地区构造演化过程的良好材料。本文通过对这些地质体野外地质特征、岩石学、地球化学特征、锆石U-Pb年代学和锆石Hf同位素特征的系统研究,以期确定其形成时代、源区性质和岩石成因,为深入探讨南阿尔金俯冲碰撞杂岩带的演化过程提供进一步约束。本文研究表明:辉长岩和闪长岩具相对较高的SiO_2含量(50.4%~53.5%)和Mg#(57~80),低的K_2O/Na_2O比值(0.17~0.67),为钙碱性系列岩石;辉长岩的∑REE偏低(36.9×10~(-6)~83.1×10~(-6)),Eu正异常(δEu=1.17~1.85);闪长岩∑REE稍高(182×10~(-6)~190×10~(-6)),Eu负异常(δEu=0.85~0.86);二者相对富集LREE和LILE,亏损HFSE。其主量元素特征、微量元素(高Nb、Zr含量,低Zr/Y比值)、锆石Hf同位素和Sr-Nd同位素组成表明二者应为大陆板内伸展背景下软流圈交代的岩石圈地幔部分熔融的产物,并在其岩浆演化过程中经历了地壳混染和分离结晶作用。花岗质细脉具高的Si O2含量(72.4%～75.5%)和K_2O/Na_2O比值(2.33～2.56),属于钾玄岩系列岩石;与闪长岩相比,两者微量元素蛛网图相似,但花岗质细脉轻重稀土分馏程度较大,Eu负异常(δEu=0.55～0.61)和P、Ti的亏损更加显著。锆石U-Pb定年结果显示,辉长岩形成时代约为400～420Ma;闪长岩和其内花岗质细脉的形成时代基本一致,约为400Ma,并具有相似的锆石Hf同位素组成和Sr-Nd同位素组成,结合地球化学特征及野外产状,推测花岗质细脉为闪长岩分异的产物。结合南阿尔金区域地质背景综合分析,塔什萨依辉长岩和闪长岩起源于造山后伸展背景下软流圈交代的岩石圈地幔的部分熔融,并经历了地壳混染和分离结晶作用;而闪长岩进一步分异形成花岗质细脉,并在其形成过程中可能伴随少量壳源熔融物质的加入。     

The Derivation and Validation of TBM Disc Cutter Wear Prediction Model

The problem of disc cutter wear is inevitable when shield or TBM excavating hard rock for a long distance, thus, the study of disc cutter wear model has an important project value on predicting its service life and replacement opportunity. It is put forward by analyzing disc cutter wear mechanism that the main wear form is abrasive wear, which is based on plastic removal mechanism. Then, disc cutter wear rate and linear wear rate prediction models are obtained by approximate calculation and mathematical deduction, which are based on Rabinowicz equation and CSM model. At last, the two models are verified through field test data from three projects, and the results show that the prediction model can accurately reflect the real wear situation of disc cutter.     

Carbon dioxide emission reduction quota allocation study on Chinese provinces based on two-stage Shapley information entropy model

Chinese central government made a commitment to achieve a 40–45% reduction in carbon dioxide (CO₂) per unit of GDP by 2020 compared with 2005. This targeted reduction was allocated averagely among all the provinces rather than individually according to different situations of each province. Though some research has been done regarding this rough allocation, two shortcomings in previous studies exist: Firstly, CO₂ marginal abatement cost (MAC) has been ignored as one of the CO₂ emission reduction allocation indexes. Secondly, either subjective or objective method has been used rather than comprehensively of both subjective and objective method to calculate the weight of each index in the previous studies. In order to fill the gaps, this paper builds a two-stage Shapley information entropy model to allocate CO₂ emission reduction quota among the Chinese provinces based on the equity and efficiency principles. Afterward, three CO₂ emission reduction quota allocation scenarios have been proposed. The results show that the CO₂ MAC is an indispensable index in CO₂ emission reduction quota allocation, because its value of CO₂ Shapley information entropy is the highest among five indexes. CO₂ emission reduction quota of lower-MAC provinces should be allocated larger, while the quota of higher-MAC provinces should be allocated smaller. Therefore, two suggested policies have been proposed: First, differential CO₂ emission reduction quota allocation should be proposed. Second, synergetic development should be promoted.