Structure, biomass distribution and trophodynamics of the pelagic ecosystem in the Oyashio region, western subarctic Pacific

Biomass distribution and trophodynamics in the oceanic ecosystem in the Oyashio region are presented and analyzed, combining the seasonal data for plankton and micronekton collected at Site H since 1996 with data for nekton and other animals at higher trophic levels from various sources. The total biomass of biological components including bacteria, phytoplankton, microzooplankton, mesozooplankton, micronekton, fishes/squids and marine birds/mammals was 23 g C m⁻², among which the most dominant component was mesozooplankton (34% of the total), followed by phytoplankton (28%), bacteria (15%) and microzooplankton (protozoans) (14%). The remainder (9%) was largely composed of micronekton and fish/squid. Marine mammals/birds are only a small fraction (0.14%) of the total biomass. Large/medium grazing copepods (Neocalaus spp., Eucalanus bungii and Metridia spp.) accounted for 77% of the mesozooplankton biomass. Based on information about diet composition, predators were assigned broadly into mean trophic level 3–4, and carbon flow through the grazing food chain was established based on the estimated annual production/food consumption balance of each trophic level. From the food chain scheme, ecological efficiencies as high as 24% were calculated for the primary/secondary production and 21% for the secondary/tertiary production. Biomass and production of bacteria were estimated as 1/10 of the respective values for phytoplankton at Site H, but the role of the microbial food chain remains unresolved in the present analysis. As keystone species in the oceanic Oyashio region, Neocalanus spp. are suggested as a vital link between primary production and production of pelagic fishes, mammals and birds.     

Discrimination of spurious self-correlation in nondimensionalized analyses of fluid dynamical data

Nondimensionalization of variables enables us to treat experiment data much more simply and efficiently by decreasing the number of variables. In some cases, trivial conclusions (which Kenney, 1982, called spurious self-correlation) result from a formal application of dimensional analyses. In contrast, in some cases fully significant conclusions can be derived. We first discuss how to construct nondimensional variables retaining the physical meanings of variables. We then propose simple and efficient methods, especially the use of “spurious triangle (SpT)”, to discriminate between significant conclusions and spurious self-correlations in the analysis of nondimensionalized variables.     

Modeling Arctic Ocean heat transport and warming episodes in the 20th century caused by the intruding Atlantic Water

This study investigates the Arctic Ocean warming episodes in the 20th century using both a high-resolution coupled global climate model and historical observations. The model, with no flux adjustment, reproduces well the Atlantic Water core temperature （AWCT） in the Arctic Ocean and shows that four largest decadalscale warming episodes occurred in the 1930s, 70s, 80s, and 90s, in agreement with the hydrographic observational data. The difference is that there was no pre-warming prior to the 1930s episode, while there were two pre-warming episodes in the 1970s and 80s prior to the 1990s, leading the 1990s into the largest and prolonged warming in the 20th century. Over the last century, the simulated heat transport via Fram Strait and the Barents Sea was estimated to be, on average, 31.32 TW and 14.82 TW, respectively, while the Bering Strait also provides 15.94 TW heat into the west- ern Arctic Ocean. Heat transport into the Arctic Ocean by the Atlantic Water via Fram Strait and the Barents Sea correlates significantly with AWCT （ C = 0.75 ） at 0- lag. The modeled North Atlantic Oscillation （NAO） index has a significant correlation with the heat transport （ C = 0.37 ）. The observed AWCT has a significant correlation with both the modeled AWCT （ C =0.49） and the heat transport （ C =0.41 ）. However, the modeled NAO index does not significantly correlate with either the observed AWCT （ C = 0.03 ） or modeled AWCT （ C = 0.16 ） at a zero-lag, indicating that the Arctic climate system is far more complex than expected.     

沙虫干呈味及功能性成分研究

对沙虫干抽提物成分的组成进行的研究结果表明 :游离氨基酸含量 w为 10 .3% ,占抽提物含氮物质的 77.9%。抽提物组成中 ,呈甘味的 Gly(3.2 % )、Ala(2 .5% )和呈鲜味的 IMP(0 .2 7% )、Glu(0 .2 5% )、琥珀酸 (0 .35% )等成分同沙虫干独特的风味有关 ,Na 、Cl-等无机离子也同其呈味相关。此外 ,牛磺酸含量 w高达 3.2 % ,是富含牛磺酸的一种海洋生物 ;精氨酸的含量 w亦较高 ,为 1.2 %。     

Mineralogical and Geochemical Constraints on Arsenic Mobility in a Philippine Geothermal Field

Arsenic is usually associated with sulphide minerals formed in the geothermal environment. However, sulphide minerals are prone to dissolution after contact with meteoric water under surface oxidizing conditions. Secondary precipitates that form from the dissolution of the primary sulfides exert a greater influence on arsenic mobility in the geothermal environment. Fe-hydroxides have very good affinity with dissolved arsenate and are stable under most surface oxidizing conditions. Both amorphous silica directly precipitated from geothermal fluids and possibly a kaolinite alteration can host a small significant amount of arsenic. These silicates are also more stable under a wide range of pH and redox conditions.     

Degradation and utilization of protein derived from <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> by marine microbial community

Microbial degradation and utilization of proteins derived from bacterial detritus were investigated in a microcosm experiment using Pseudomonas aeruginosa detritus as a substrate. To assess the effects of natural marine microbial communities on degradation and utilization of protein derived from P. aeruginosa cells, four microcosms were prepared: natural seawater (containing the natural microbial community) with P. aeruginosa detritus (N+Pa), autoclaved seawater with P. aeruginosa detritus (A+Pa), natural seawater (N) and autoclaved seawater (A) without adding anything as a control. The numbers of total and growing bacterial cells, protease activity, and transition of P. aeruginosa proteins were monitored in the four microcosms. Changes in the numbers of total and growing bacterial cells and protease activities indicated that bacterial detritus significantly stimulated the microbial community in the microcosms. Both the surviving P. aeruginosa in A+Pa and natural microbial community in N+Pa microcosms were able to degrade and utilize P. aeruginosa detritus; however, the community in N+Pa including various microbes maintained high activity longer, indicating that diversity is an important factor in keeping the community active. Even under the very high protease activity in N+Pa, 39-kDa and 48-kDa proteins from P. aeruginosa remained in the microcosm during the entire experiment (150 days). Immunoblotting suggested the 48-kDa protein was an intact molecule of OprP, which had been detected from the dissolved fraction of natural seawater in previous studies. This result suggests that the protein molecules that had been detected from natural seawater actually had a high tolerance to microbial degradation.     

Origin of calcium in aerosols over the western North Pacific

Weekly aerosol samples were collected from March 1981 to June 1983 at the six stations in the western North Pacific region and analyzed for Ca and Na. By coupling data with those previously reported for Al (Tsunogai et al., 1985), the following results and conclusion have been obtained. There was a positive correlation between the atmospheric concentration of Al and the concentration of nonsea salt Ca (nssCa). The nssCa/Al ratios from the six stations, however, considerably varied (from 0.84±0.36 to 3.00±1.91), and the ratios were usally larger than those of the crustal average or of usual soil in Japan. The Ca/Al ratios of Asian desert soil and loess vary from 0.52 to 1.29, which are similar to the nssCa/Al ratios of aerosols in the surface air over the western North Pacific region except at Onna, Okinawa. The exception may be due to a local effect of coral. These results suggest that a large part of nonsea salt Ca in the surface air over the western North Pacific is derived from arid regions in Asia and that the nssCa/Al ratio in aerosol varies with that of the source material.     

Attenuation of compressional waves in peridotite measured as a function of temperature at 200 MPa

A technique has been developed to determine attenuation in rocks at high temperature using a gas-media, high-pressure apparatus. A pulse transmission technique and a spectral ratio method are used to study compressional seismic properties of rocks. Seismic waves are transmitted to and from the sample through buffer rods of mullite. The effect of seismic wave reflections within the sample assembly are cancelled out by taking ratios of the spectra measured at different temperatures. In order to obtain good signal-to-noise ratio for resolving the attenuation at high pressure and temperature, special care is taken in the sample assembly and the ultrasonic coupling between the sample, buffer rods and transducers. A very tight connection of the sample-buffer rod-transducer is essential for obtaining high frequency signals (>300 kHz) at high temperature. A small mass is attached to each outside end of the transducer to drive low frequency signals (<250 kHz) into the sample. Before attenuation measurements, the sample and the buffer rods are tightly compacted in a platinum tube at high pressure and room temperature to ensure pressure seal of the sample assembly. The frequency range of measurement covers 50 to 450 kHz for the sample. Attenuation is very small in the buffer rod compared to the sample for the entire temperature range of the study. Because of the small attenuation, a wide frequency band of 50 kHz to 3.2 MHz can be covered for investigating the attenuation in the buffer rod. The technique has been used to measure attenuation at high confining pressure, and temperatures including sub- and hyper-solidus of upper mantle rocks. Therefore, effects of partial melting on attenuation can be studied.The method is applied to the attenuation measurement in a peridotite as a function of temperature to 1225°C at 200 MPa confining pressure. At high temperature, signal amplitude decays more rapidly at high frequency than at low frequency, from which attenuation (andQ) can be determined using a spectral ratio method. No frequency dependence ofQ is resolved for both the sample and the buffer rod over the entire temperature and frequency ranges of the measurement. The results show thatQ decreases rapidly with increasing temperature even in the temperature range below the solidus of peridotites. Such temperature sensitivity ofQ is probably more useful to probe thermal structure in the upper mantle than that of conductivity at temperatures below the solidus. The results in this study are compared with available seismic velocity, electrical conductivity and solidus data for peridotites, suggesting that there is no discontinuous change in both mechanical and electrical properties of peridotites at the solidus temperature. Even at hypersolidus temperatures, it appears that velocity drops and conductivity increases continuously (not abruptly) with increasing melt fraction. This implies that mechanical and electrical properties of the upper mantle will gradually change at the boundary where the geotherm crosses the solidus.     

Characteristics of amorphous kerogens fractionated from terrigenous sedimentary rocks

A preliminary attempt to fractionate amorphous kerogens from terrigenous bulk kerogen by a benzene-water two phase partition method under acidic condition was made. Microscopic observation revealed that amorphous kerogens and structured kerogens were fractionated effectively by this method. Characteristics of the amorphous and structured kerogens fractionated by this method were examined by some chemical analyses and compared with those of the bulk kerogen and humic acid isolated from the same rock sample (Haizume Formation, Pleistocene, Japan). The elemental and infrared (IR) analyses showed that the amorphous kerogen fraction had the highest atomic$\text{H}\text{C}$ ratio and the lowest atomic $\text{N}\text{C}$ ratio and was the richest in aliphatic structures and carbonyl and carboxyl functional groups. Quantities of fatty acids from the saponification products of each geopolymer were in agreement with the results of elemental and IR analyses. Distribution of the fatty acids was suggestive that more animal lipids participate in the formation of amorphous kerogens because of the abundance of relatively lower molecular weight fatty acids (such as C₁₆ and C₁₈ acids) in saponification products of amorphous kerogens. On the other hand, although the amorphous kerogen fraction tends to be rich in aliphatic structures compared with bulk kerogen of the same rock samples, van Krevelen plots of elemental compositions of kerogens from the core samples (Nishiyama Oil Field, Tertiary, Japan) reveal that the amorphous kerogen fraction is not necessarily characterized by markedly high atomic $\text{H}\text{C}$ ratio. This was attributed to the oxic environment of deposition and the abundance of biodegraded terrestrial amorphous organic matter in the amorphous kerogen fraction used in this work.