Sequential solutions with the bandtype system of Observation equations

The construction of formulas for sequentially computing solutions and a variance-covariance matrix with the bandtype system of observation equations, which is inherent in geodetic networks, is carried out; these formulas are illustrated with a simple numerical example in which the adjustment for the trilateration of triply coupled quadrilaterals is executed.     

The peristerite gap in low-grade metamorphic rocks

Coexisting Na-plagioclases from greenschists both in the thermal aureole of the Kasugamura Granite, Japan, and in the low-P metamorphic zone of Yap Island, western Pacific were analyzed in great detail; the peristerite solvus was determined for each suite. The asymmetric solvus has steep albite-rich and gentle oligoclase-rich limbs that are similar to those for higher pressure series. The present results together with those from Vermont, New Zealand, and the Sanbagawa belt indicate that the peristerite solvus shifts toward the albite component and higher temperature with increasing pressure. With increasing pressure, albite co-existing with oligoclase (An=100 Ca/Ca+ Na=20) varies in composition from An 8–9 (in Kasugamura), through An 3 (in Yap Island and Vermont), to An 1 (in New Zealand) and An less than 0.5 (in the Sanbagawa belt). The consolute temperatures for the peristerite solvus estimated from available geothermometry are 420° C in Kasugamura, 450–550° C in Vermont and 550°–600° C in the Sanbagawa belt. The variation of plagioclase composition in progressive metamorphic zones is explained by intersection of a plagioclase-forming reaction and the peristerite immiscibility gap in an isobaric T-X _An diagram. The greenschist zone is characterized by albite, the transition zone by occurrence of peristerite pairs and the amphibolite zone by plagioclase of An 20–50.     

Geochemical characteristics of Tertiary Sagara oil from an active forearc basin, Shizuoka, Japan

Abstract   The Sagara oil field is located in the Neogene Kakegawa Basin, close to the Izu collision zone at the junction between the main Japanese Islands and the Izu–Bonin Arc. The Sagara oil field is one of the few oil fields situated in a forearc basin on the Pacific side of Japan and is present in a sedimentary basin with poor oil-generating potential. Several crude oils from Sagara oil field were investigated to infer their origin. Organic geochemical characteristics of Sagara oils showed the influences of light biodegradation, migration-contamination, and migration-fractionation. The maturity levels of Sagara oils evaluated based on abundant alkylnaphthalenes corresponded to 0.9–1.2% vitrinite reflectance. Sagara oils were characterized by significant amounts of higher plant biomarkers, a high pristane/phytane ratio and an absence of organic sulphur compounds, suggesting a siliciclastic source rock deposited under nearshore to fluvial–deltaic environments. Numerous faults and fractures in the active forearc basin provided excellent conduits and facilitated upward migration of light hydrocarbons generated at greater depth in the Kakegawa Basin.     

The effect of surface characteristics on diffuse reflection radiation at λ=0.40 μm

The diffuse radiation in the upward direction at the top and at an internal level of an inhomogeneous atmosphere is computed at =0.40 m. The surface is assumed to reflect light in accordance with a hybrid mode of a diffuse and specular reflector. The objective is to estimate the effect of underlying surface characteristics in terms of the diffuse radiation field. By making use of these results, accuracy in monitoring the atmospheric aerosols would be increased for the use of remote sensing satellite techniques. Junge power lawv ^*=3 is adopted for the size distribution of aerosols (1963), while the data given by McClatchyet al. (1971) is used for the number density of aerosols with height distribution. It is noted from the computations that the diffuse reflection radiation is affected by the surface characteristics, even if the albedo of the surface is a fixed constant and very small.On leave from the Meterological Research Institute, Tokyo, Japan.bl]References     

Neural Network-Based Estimation of Principal Metal Contents in the Hokuroku District,Northern Japan,for Exploring Kuroko-Type Deposits

The Hokuroku district, extending over 40 × 40 km² in northern Japan, is known to be dominated by kuroko-type massive sulfide deposits that have a genetic relation to submarine volcanic activity. The deposits are hosted in a specific stratigraphic zone of Miocene volcanic rocks. Because kuroko-type deposits are under exploration in several countries, it is important to integrate the geologic and geochemical data that have been accumulated in the Hokuroku district to characterize the distribution of deposits and produce a map of mineral potential. Thus, we collected data on multiple chemical components from 1917 rock cores at 143 drillhole sites and concentrated on components with relatively large amounts of data, which are SiO₂, Al₂O₃, and Fe₂O₃ as major elements and Cu, Pb, and Zn as trace elements. Although frequencies of these data can be approximated by normal or lognormal distributions, spatial correlation structures cannot be extracted from the semivariograms of each component nor from the cross-semivariograms between two components of the major or minor elements. To handle such complexity, a spatial method of modeling content distribution, SLANS, is developed by applying a feedforward neural network. The principle of SLANS is to train a network repeatedly to recognize the relation between the data value and the location and lithology of a sample point. One-hundred outputs for each element are obtained by changing the numbers of neurons in a middle layer from 1 to 10 and sample data used for training from 3 to 12, and finally one output is selected based on the estimation precision of the network which is restricted near the target point. After constructing a geologic distribution model from the geological column classified into 25 rock codes, three-dimensional distributions of Cu, Pb, and Zn contents are estimated over the study area. The content models are considered to be valid because high-content zones are located on the known mine sites and the margins of ancient volcanoes or calderas. Some zones are distributed along strikes of major deep-seated fractures in the district.     

Distribution of fossil seawater and its role in Neogene sedimentary rock landslides in Niigata,eastern marginal region of the Japan Sea

The Neogene marine sedimentary rock area in the eastern marginal region of the Japan Sea is an area with some of the highest landslide densities in Japan. Some of the landslides in this area have been known to involve saline groundwater, which can be the cause of these landslides. In order to demonstrate the relationships between landslides and saline water, topographic, geological, groundwater, and electromagnetic surveys were performed in the eastern marginal region of the Japan Sea. Many landslides and gravitational slope deformations with linear depressions and small scarps were recognized in the study area. The resistivity profile obtained by an electromagnetic survey suggests that there is a wide zonal distribution of saline water with salt concentrations equivalent to seawater at depths of 50–100 m or more and that the groundwater shallower than 50 m has an electrical conductivity of less than 100 mS/m. The shallow resistive groundwater is inferred to be meteoric water that replaced the saline groundwater, which likely weakened the bedrock, resulting in landslides. A ridge of competent tuff overlying mudstone has many linear depressions from gravitational slope deformation and low‐resistivity water to a depth of 600 m, which suggests that the mudstone was weakened by water replacement and deformed under the tuff caprock. The saline groundwater is inferred to be fossil seawater trapped in pores during sediment deposition, which is brought near the ground surface along with rocks by tectonic movement in the hills. Thus, the saline water and its fresh water replacement are among the important basic causes of the landslides. The oil well data obtained in the eastern marginal region of the Japan Sea suggest that such saline water replacement has occurred widely and that replacement is likely one of the predispositions for the frequent landslides there.     

Effects of alkali and alkaline-earth cations on the high-pressure sound velocities of aluminosilicate glasses

Physics and Chemistry of Minerals - A black tourmaline sample from Seagull batholith (Yukon Territory, Canada) was established to be a schorl with concentrations of Fe2+ among the highest currently...     

安宁河-则木河断裂带过渡段及其附近新发现的历史大地震破裂遗迹

在近些年的野外调查中,我们在安宁河、则木河2断裂带的过渡段(礼州至西昌之间)及其附近的3个场地发现了未知年代的地表破裂。通过分析这些地表破裂的特征以及在本区历史地震重破坏区中的位置,我们认为位于杨福山村以北与大坪子村以西2个场地的破裂应是1536年大地震地表破裂带的遗迹。这不仅反映了1536年大地震破裂带的南段沿安宁河与则木河断裂带的过渡段产生,而且反映了该破裂带的南端很可能到达了或者很接近于西昌。位于西昌略北李金堡村以东的破裂应属于1850年大地震地表破裂带的遗迹,它进一步证明了1850年大地震地表破裂带的西北端可能到达西昌以北至少数千米处。因而,由文中的证据可推断西昌附近的主干活动断裂在1536年和1850年大地震时均发生了破裂     

Geology of the Gorny Altai subduction–accretion complex, southern Siberia: Tectonic evolution of an Ediacaran–Cambrian intra-oceanic arc-trench system

The Gorny Altai region in southern Siberia is one of the key areas in reconstructing the tectonic evolution of the western segment of the Central Asian Orogenic Belt (CAOB). This region features various orogenic elements of Late Neoproterozoic–Early Paleozoic age, such as an accretionary complex (AC), high-P/T metamorphic (HP) rocks, and ophiolite (OP), all formed by ancient subduction–accretion processes. This study investigated the detailed geology of the Upper Neoproterozoic to Lower Paleozoic rocks in a traverse between Gorno-Altaisk city and Lake Teletskoy in the northern part of the region, and in the Kurai to Chagan-Uzun area in the southern part. The tectonic units of the studied areas consist of (1) the Ediacaran (=Vendian)–Early Cambrian AC, (2) ca. 630 Ma HP complex, (3) the Ediacaran–Early Cambrian OP complex, (4) the Cryogenian–Cambrian island arc complex, and (5) the Middle Paleozoic fore-arc sedimentary rocks. The AC consists mostly of paleo-atoll limestone and underlying oceanic island basalt with minor amount of chert and serpentinite. The basaltic lavas show petrochemistry similar to modern oceanic plateau basalt. The 630 Ma HP complex records a maximum peak metamorphism at 660 °C and 2.0 GPa that corresponds to 60 km-deep burial in a subduction zone, and exhumation at ca. 570 Ma. The Cryogenian island arc complex includes boninitic rocks that suggest an incipient stage of arc development. The Upper Neoproterozoic–Lower Paleozoic complexes in the Gorno-Altaisk city to Lake Teletskoy and the Kurai to Chagan-Uzun areas are totally involved in a subhorizontal piled-nappe structure, and overprinted by Late Paleozoic strike-slip faulting. The HP complex occurs as a nappe tectonically sandwiched between the non- to weakly metamorphosed AC and the OP complex. These lithologic assemblages and geologic structure newly documented in the Gorny Altai region are essentially similar to those of the circum-Pacific (Miyashiro-type) orogenic belts, such as the Japan Islands in East Asia and the Cordillera in western North America. The Cryogenian boninite-bearing arc volcanism indicates that the initial stage of arc development occurred in a transient setting from a transform zone to an incipient subduction zone. The less abundant of terrigenous clastics from mature continental crust and thick deep-sea chert in the Ediacaran–Early Cambrian AC may suggest that the southern Gorny Altai region evolved in an intra-oceanic arc-trench setting like the modern Mariana arc, rather than along the continental arc of a major continental margin. Based on geological, petrochemical, and geochronological data, we synthesize the Late Neoproterozoic to Early Paleozoic tectonic history of the Gorny Altai region in the western CAOB.     

Simplified seismic design approach for steel portal frame piers with hysteretic dampers

A simplified seismic design procedure for steel portal frame piers installed with hysteretic dampers is proposed, which falls into the scope of performance‐based design philosophy. The fundamental goal of this approach is to design a suite of hysteretic damping devices for existing and new bridge piers, which will assure a pre‐defined target performance against future severe earthquakes. The proposed procedure is applicable to multi‐degree‐of‐freedom systems, utilizing an equivalent single‐degree‐of‐freedom methodology with nonlinear response spectra (referred to as strength‐demanded spectra) and a set of formulae of close‐form expressions for the distribution of strength and stiffness produced in the structure by the designed hysteretic damping devices. As an illustrative example, the proposed procedure is applied to a design of a simple steel bridge pier of portal frame type with buckling‐restrained braces (one of several types of hysteretic dampers). For the steel portal frame piers, an attempt is made to utilize not only the displacement‐based index but also the strain‐based index as pre‐determined target performance at the beginning of design. To validate this procedure, dynamic inelastic time‐history analyses are performed using the general‐purpose finite element program ABAQUS. The results confirm that the proposed simplified design procedure attains the expected performance level as specified by both displacement‐based and strain‐based indices with sufficient accuracy. Copyright © 2006 John Wiley & Sons, Ltd.