Pressure and temperature dependence of the viscosity of a NaAlSi<Subscript>2</Subscript>O<Subscript>6</Subscript> melt

The viscosity of a silicate melt of composition NaAlSi₂O₆ was measured at pressures from 1.6 to 5.5 GPa and at temperatures from 1,350 to 1,880°C. We employed in situ falling sphere viscometry using X-ray radiography. We found that the viscosity of the NaAlSi₂O₆ melt decreased with increasing pressure up to 2 GPa. The pressure dependence of viscosity is diminished above 2 GPa. By using the relationship between the logarithm of viscosity and the reciprocal temperature, the activation energies for viscous flow were calculated to be 3.7 ± 0.4 × 10² and 3.7 ± 0.5 × 10² kJ/mol at 2.2 and 2.9 GPa, respectively.     

Ground subsidence in Semarang-Indonesia investigated by ALOS–PALSAR satellite SAR interferometry

The focus of this study is investigation of land subsidence in Semarang city Indonesia with the use of Interferometry Synthetic Aperture Radar (InSAR) of ALOS–PALSAR satellite. We processed 22 ascending SAR images during January 2007 to January 2009 plus two descending SAR images acquired on 6 June 2006 and 17 June 2007. The time series analysis of interferometry was performed by using 12 pairs of interferogram relative to 21 January 2007 and 8 pairs of interferogram relative 24 January 2008. The topographic phase contribution was removed using the 3-arcsec (90 m) Shuttle Radar Topography Mission (SRTM), Digital Elevation Model (DEM). We performed precision baseline estimation to vanish the fringes from baseline effect between master and slave data. In order to investigate the contribution of horizontal movement in our analysis, we constructed two interferograms of ascending orbit and descending orbit. The time series results exhibited that the area is subsiding continuously without a significant seasonal effect during January 2007 to January 2009. The land subsidence observed from InSAR data is approximately up to 8 cm/year. Three cross sections on image displacement show the extreme land subsidence occurred especially along the coastal area and lowland area where this area is considered as industrial with high-density settlements, consuming a lot of groundwater, and land is changed from agriculture and cultivation purposes to industrial estates and house. Our result also shows a consistency with historical pattern of subsidence measured by leveling data. The results highlight the potential use of InSAR measurements to provide better constraints for land subsidence in Semarang city Indonesia.     

Importance of intracellular Fe pools on growth of marine diatoms by using unialgal cultures and on the Oyashio region phytoplankton community during spring

We report on the ability for luxury Fe uptake and the potential for growth utilizing intracellular Fe pools for 4 coastal centric diatom isolates and in situ phytoplankton assemblages, mainly composed of diatoms. Iron uptake of the diatom isolates and natural phytoplankton assemblages in the Oyashio region during spring blooms were prevented by adding hydroxamate siderophore desferrioxamine B (DFB). After the addition of DFB, intracellular Fe in the diatom isolates supported 2.4–4.2 cell divisions with 1.2–2.6 Chl a doublings. The intracellular Fe was primarily used for cell generation rather than Chl a production, leading to a reduction in the Chl a cell quota in the Fe-starved cells with time. The metabolic properties of the Fe-starved cells with their cell morphologies were different among species or genera. An on-deck incubation experiment also exhibited 1.9 cell divisions and 0.81 Chl a doublings of phytoplankton after the addition of DFB, also indicating the preference of cell generation over Chl a production. A decrease in the level of cellular Chl a, a main light-harvesting pigment in Fe-starved diatoms, may become a superior survival strategy to protect the cells from high irradiance that can cause photo-oxidative damages through photosynthesis. Such relatively low-Fe with high-light conditions could often occur in surface waters of the Oyashio region from spring to summer.     

Formation process of pyrite polyframboid based on the heavy-metal analysis by micro-PIXE

Pyrite framboid in sedimentary rocks could be concerned with arsenic contamination in groundwater of acidic environment and has been studied for the formation process of its unique morphology. However, not much has been discussed about the formation process based on the heavy-metal distribution in pyrite framboids and their aggregates. To reveal the formation process of pyrite framboids and their aggregates, mudstone from the Late Cretaceous Hakobuchi Group, central Hokkaido, Japan, are investigated for mode, petrographical, mineralogical, and micro-PIXE (particle-induced X-ray emission) analysis in this study. Spherical and sub-spherical pyrite framboids observed in polyframboids can be divided into two types based on the diameter of framboids (D) and the average diameter of microcrystals (d) within framboids: type 1, ranging from 2 to 9 μm and from 0.4 to 0.9 μm, respectively, and type 2, ranging from 8 to 50 μm and from 0.5 to 1.8 μm, respectively. Based on the quantitative traverse analyses and 2-D elemental mapping results by micro-PIXE, heterogeneities in the concentrations of heavy metals within the analyzed aggregations of pyrite are exhibited. On the basis of the As and Pb zoning patterns, the time range and chronological stages of pyrite-aggregation growth are revealed.     

A study of the morphology of winter sprites in the Hokuriku area of Japan in relation to cloud charge height

Continuous observations of sprites in the Hokuriku area of Japan were performed from two optical sites during the three winter periods. The purpose of this observation is to study the major effect in the appearance of sprites and in determining the morphology of sprites (columns or carrots). Detailed analysis is performed based on the estimation of the height of ?10 °C at the time of sprite occurrence. When the height of ?10 °C is lower than 1800 m, the occurrence of sprites is infrequent, and the dominant shape is column. Then when it is increased (1800–3000 m), a new situation takes place, namely the occurrence of sprites is very enhanced and more spectacular shapes like carrots tend to be frequently observed in addition to column sprites. These sprite characteristics are first compared with those of parent lightning in the Hokuriku area and with our latest computer simulations on sprite initiation.     

Three-dimensional EM computer simulation on sprite initiation above a horizontal lightning discharge

The purpose of this paper is to study the three-dimensional (3D) effects of the source current and the electromagnetic (EM) pulse on the distribution of upper atmospheric electric field and ionization created. A new lightning model has been employed; i.e., we have included a horizontal channel in addition to the conventional vertical channel. The effects of the horizontal lightning channel are summarized as follows: (1) the effect of a vertical channel plays a fundamental role in the whole view of sprite initiation; (2) the position of a sprite is shifted from the position of its parent vertical channel in response to the length of a horizontal channel; and (3) we observe very fine structures with local maxima and minima in the “reduced” electric field (the electric field divided by the neutral gas density). These theoretical inferences are discussed and compared with the observational facts so far reported (such as lateral shift of sprites, morphological difference of sprites, etc.).     

Simulation of near source ground motion and its characteristics

It is fact that the severe ground motions of shear waves have a strong effect on the dynamic behavior of buildings and civil structures. We simulate near source strong motions of a pure shear wave and synthesize small motions, using the parameters based on the recorded accelerograms at the site that is regarded as a base rock in the Osaka basin, Japan. By making use of a stochastic technique, we can easily introduce higher frequency contents in the motions and apply the technique to the synthesis of small waves regarding as a green function. We also introduce to the analysis the useful relationships among the time duration T_d, the seismic moment M₀, the corner frequency f_c and the high cutoff frequency f_max which were regressed by a simple representation scheme. Considering two active faults that may affect severe damage on buildings and civil structures, we try to predict strong ground motions in Osaka basin and show the characteristics of them.     

Thermobaric structure of the Kokchetav ultrahigh-pressure–high-pressure massif deduced from a north–south transect in the Kulet and Saldat–Kol regions, northern Kazakhstan

Abstract To investigate the regional thermobaric structure of the diamondiferous Kokchetav ultrahigh‐pressure and high‐pressure (UHP–HP) massif and adjacent units, eclogite and other metabasites in the Kulet and Saldat–Kol regions, northern Kazakhstan, were examined. The UHP–HP massif is subdivided into four units, bounded by subhorizontal faults. Unit I is situated at the lowest level of the massif and consists of garnet–amphibolite and acidic gneiss with minor pelitic schist and orthogneiss. Unit II, which structurally overlies Unit I, is composed mainly of pelitic schist and gneiss, and whiteschist locally with abundant eclogite blocks. The primary minerals observed in Kulet and Saldat–Kol eclogites are omphacite, sodic augite, garnet, quartz, rutile and minor barroisite, hornblende, zoisite, clinozoisite and phengite. Rare kyanite occurs as inclusions in garnet. Coesite inclusions occur in garnet porphyroblasts in whiteschist from Kulet, which are closely associated with eclogite masses. Unit III consists of alternating orthogneiss and amphibolite with local eclogite masses. The structurally highest unit, Unit IV, is composed of quartzitic schist with minor pelitic, calcareous, and basic schist intercalations. Mineral assemblages and compositions, and occurrences of polymorphs of SiO₂ (quartz or coesite) in metabasites and associated rocks in the Kulet and Saldat–Kol regions indicate that the metamorphic grades correspond to epidote–amphibolite, through high‐pressure amphibolite and quartz–eclogite, to coesite–eclogite facies conditions. Based on estimations by several geothermobarometers, eclogite from Unit II yielded the highest peak pressure and temperature conditions in the UHP–HP massif, with metamorphic pressure and temperature decreasing towards the upper and lower structural units. The observed thermobaric structure is subhorizontal. The UHP–HP massif is overlain by a weakly metamorphosed unit to the north and is underlain by the low‐pressure Daulet Suite to the south; boundaries are subhorizontal faults. There is a distinct pressure gap across these boundaries. These suggest that the highest grade unit, Unit II, has been selectively extruded from the greatest depths within the UHP–HP unit during the exhumation process, and that all of the UHP–HP unit has been tectonically intruded and juxtaposed into the adjacent lower grade units at shallower depths of about 10 km.     

Os, Pb, and Nd isotope geochemistry of the Permian Emeishan continental flood basalts: Insights into the source of a large igneous province

The nature of the source of continental flood basalts (CFB) is a highly debated topic. Proposed mantle sources for CFBs, including both high- and low-Ti basalts, include subcontinental lithospheric mantle (SCLM), asthenospheric mantle, and deep, plume-related mantle. Re-Os isotope systematics can offer important constraints on the sources of both ocean island basalts (OIB) and CFB, and may be applied to distinguish different possible melt sources. This paper reports the first Re-Os isotope data for the Late Permian Emeishan large igneous province (LIP) in Southwest China. Twenty one CFB samples including both low- and high-Ti basalts from five representative sites within the Emeishan LIP have been analyzed for Os, Nd, and Pb isotopic compositions. The obtained Os data demonstrate that crustal assimilation affected Os isotopic compositions of some Emeishan basalt samples with low Os concentrations but not all of the samples, and the Emeishan basalts with high Os contents likely experienced the least crustal contamination. The low and high-Ti basalts yield distinct Os signatures in terms of ¹⁸⁷Os/¹⁸⁸Os and Os content. The low-Ti basalt with the highest Os concentration (400 ppt) has a radiogenic Os isotopic composition (γOs(t), +6.5), similar to that of plume-derived OIB. Because the Os isotopic composition of basalts with relatively high Os concentrations (typically >50 ppt) likely represents that of their mantle source, this result implies a plume-derived origin for the low-Ti basalts. On the other hand, the high-Ti basalts with high Os concentration (over 50 ppt) have unradiogenic Os isotopic signatures (γOs(t) values range from −0.8 to −1.4), suggesting that a subcontinental lithosphere mantle (SCLM) component most likely contributed to the generation of these magmas. Combining Pb and Nd isotopic tracers with the Os data, we demonstrate that the low-Ti basaltic magmas in the Emeishan CFB were mainly sourced from a mantle plume reservoir, whereas the high-Ti basaltic magmas were most likely derived from a SCLM reservoir or were contaminated by a significant amount of lithospheric mantle material during plume-related magma ascent through the SCLM.