Impact of beaver dam analogues on hydrology in a semi-arid floodplain

Natural beaver ponds help connect the stream to the floodplain, maintain late summer low flows and reduce peak flow during high flow events by offering temporary surface water (SW) storage. When beavers are extirpated from the landscape, stream degradation often ensues. This study assesses the impact of beaver dam analogues (BDA) as a stream restoration technique to help maintain low flow water levels and enhance stream-floodplain interactions on a seasonal basis in Red Canyon Creek, Lander, WY. BDAs increased SW and groundwater (GW) levels, favoured the occurrence of flow reversals (i.e., stream-to-floodplain GW flow) during high flow events associated with mid-winter and early-spring thaw events, and reduced the groundwater-to-stream hydraulic gradient on an annual basis. Although GW temperatures varied seasonally, relatively cooler GW temperatures were observed in the BDA impacted reach compared to the control reach away from BDA influence. BDAs however did not significantly impact stream temperatures. Overall, results suggest that when installed in sequence, BDA complexes can successfully reconnect the stream to its floodplain, and ultimately increase SW-GW exchange at the floodplain scale by allowing flow reversals to occur and by reducing the GW to stream hydraulic gradient. Although BDAs built with fence posts, willow branches, sediments and small boulders are naturally porous and require regular maintenance, this study also highlights the viability of small BDAs as a restoration practice to enhance landscape resilience to drought and high flow events in deeply incised channels where beavers would not come back naturally.     

Practical aspects of frequency-domain identification of dynamic models of marine structures from hydrodynamic data

The motion response of marine structures in waves can be studied using finite-dimensional linear-time-invariant approximating models. These models, obtained using system identification with data computed by hydrodynamic codes, find application in offshore training simulators, hardware-in-the-loop simulators for positioning control testing, and also in initial designs of wave-energy conversion devices. Different proposals have appeared in the literature to address the identification problem in both time and frequency domains, and recent work has highlighted the superiority of the frequency-domain methods. This paper summarises practical frequency-domain estimation algorithms that use constraints on model structure and parameters to refine the search of approximating parametric models. Practical issues associated with the identification are discussed, including the influence of radiation model accuracy in force-to-motion models, which are usually the ultimate modelling objective. The illustration examples in the paper are obtained using a freely available MATLAB toolbox developed by the authors, which implements the estimation algorithms described.     

Distinction between the Youngest Toba Tuff and Oldest Toba Tuff from northern Sumatra based on the area density of spontaneous fission tracks in their glass shards

Determination of the area density of spontaneous fission tracks (ρ_s) in glass shards of Toba tephra is a reliable way to distinguish between the Youngest Toba Tuff (YTT) and the Oldest Toba Tuff (OTT). The ρ_s values for YTT, uncorrected for partial track fading, range from 70 to 181 tracks/cm² with a weighted mean of 108 ± 5 tracks/cm², based on 15 samples. Corrected ρ_s values for YTT are in the range of 77–140 tracks/cm² with a weighted mean of 113 ± 8 tracks/cm², within the range of uncorrected ρ_s values. No significant difference in ρ_s exists between YTT samples collected from marine and continental depositional settings. The uncorrected ρ_s for OTT is 1567 ± 114 tracks/cm² so that confusion with YTT is unlikely.     

The 2011 expedition to the El'gygytgyn impact structure,Northeast Russia: Toward a new geological map for the crater area

El'gygytgyn is a 3.6 Ma, 18 km diameter, impact crater formed in an approximately 88 Ma old volcanic target in Northeast Siberia. The structure has been the subject of a recent ICDP drilling project. In parallel to those efforts, a Russian‐German expedition was undertaken in summer 2011 to investigate the permafrost soil, lake terraces, and the volcanic rocks of the southern and eastern crater rim. This provided the unique opportunity for mapping and sampling of the volcanic target rocks around a large part of this complex impact structure. Samples from 43 outcrops were collected and analyzed petrographically and geochemically. The results were combined with earlier mapping outcomes to create a new geological map of this impact structure and its immediate environs, at the scale of 1:50,000. Compositions of our rock suites are compared with the lithologies of the 2009 ICDP drill core. The ignimbrite described as lower bedrock in the ICDP drill core shows petrographically and chemically strong similarities to the rhyolitic and rhyodacitic ignimbrites observed on surface. The suevite sequence exposed in the ICDP drill core is a mixture of all observed target rocks at their respective proportions in the area. In contrast to previous studies, the calculated average target composition of El'gygytgyn takes the contribution of the basic target rocks into consideration: mafic and intermediate rocks approximately 7.5%, and felsic rocks approximately 92.5%.     

Correlation and characterisation of individual glass shards from tephra deposits using trace element laser ablation ICP‐MS analyses: current status and future potential

Laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) is a high spatial resolution analytical method which has been applied to the analysis of silicic tephras. With current instrumentation, around 30 trace elements can be determined from single glass shards as small as ～ 40 µm, separated from tephra deposits. As a result of element fractionation during the ablation process using a 266 nm laser, a relatively complex calibration strategy is required. Nonetheless, such a strategy gives analyses which are accurate (typically within ±5%) and have an analytical precision which varies from ～ ±2% at 100 ppm, to ～ ±15% at 1 ppm. Detection limits for elements used in correlation and discrimination studies are well below 1 ppm. Examples of the application of trace element analysis by LA‐ICP‐MS in tephra studies are presented from the USA, New Zealand and the Mediterranean. Improvements in instrumental sensitivity in recent years have the potential to lower detection limits and improve analytical precision, thus allowing the analysis of smaller glass shards from more distal tephras. Laser systems operating at shorter wavelengths (e.g. 193 nm) are now more widely available, and produce a much more controllable ablation in glasses than 266 nm lasers. Crater sizes of <10 µm are easily achieved, and at 193 nm many of the elemental fractionation issues which mar longer wavelengths are overcome. By coupling a short wavelength laser to a modern ICP‐MS it should be possible to determine the trace element composition of glass shards as small as 20 µm and, providing sample preparation issues can be overcome, the determination of the more abundant trace elements in glass shards as small as 10 µm is within instrumental capabilities. This will make it possible to chemically fingerprint tephra deposits which are far from their sources, and will greatly extend the range over which geochemical correlation of tephras can be undertaken. Copyright © 2007 John Wiley & Sons, Ltd.     

Eruptive environments and inferred exploration potential of metabasalts from New South Wales

The Honeysuckle Beds, Jindalee Beds, Woolomin Beds and Nambucca Beds all contain metavolcanic units of dismembered ophiolite suites in the Palaeozoic of New South Wales. It is assumed that no major changes in the distribution of stable trace elements have taken place during metamorphism. Geological evidence and stable trace element data indicate that the Honeysuckle and Jindalee Beds may contain metabasalts of marginal basin origin whereas the Woolomin and Nambucca Beds may contain metabasalts erupted during the opening phase of a major ocean. Comparison with massive sulphide-bearing metabasalts elsewhere suggests that the Honeysuckle Beds and Jindalee Beds, which chemically resemble metabasalts from the Troödos Massif of Cyprus, have the greatest exploration potential.     

Community collaboration and climate change research in the Canadian Arctic

Research on climate change impacts, vulnerability and adaptation, particularly projects aiming to contribute to practical adaptation initiatives, requires active involvement and collaboration with community members and local, regional and national organizations that use this research for policy-making. Arctic communities are already experiencing and adapting to environmental and socio-cultural changes, and researchers have a practical and ethical responsibility to engage with communities that are the focus of the research. This paper draws on the experiences of researchers working with communities across the Canadian Arctic, together with the expertise of Inuit organizations, Northern research institutes and community partners, to outline key considerations for effectively engaging Arctic communities in collaborative research. These considerations include: initiating early and ongoing communication with communities, and regional and national contacts; involving communities in research design and development; facilitating opportunities for local employment; and disseminating research findings. Examples of each consideration are drawn from climate change research conducted with communities in the Canadian Arctic.     

Climate change policy responses for Canada's Inuit population: The importance of and opportunities for adaptation

We identify and examine how policy intervention can help Canada's Inuit population adapt to climate change. The policy responses are based on an understanding of the determinants of vulnerability identified in research conducted with 15 Inuit communities. A consistent approach was used in each case study where vulnerability is conceptualized as a function of exposure-sensitivity to climatic risks and adaptive capacity to deal with those risks. This conceptualization focuses on the biophysical and human determinants of vulnerability and how they are influenced by processes and conditions operating at multiple spatial-temporal scales. Case studies involved close collaboration with community members and policy makers to identify conditions to which each community is currently vulnerable, characterize the factors that shape vulnerability and how they have changed over time, identify opportunities for adaptation policy, and examine how adaptation can be mainstreamed. Fieldwork, conducted between 2006 and 2009, included 443 semi-structured interviews, 20 focus groups/community workshops, and 65 interviews with policy makers at local, regional, and national levels. Synthesizing findings consistent across the case studies we document significant vulnerabilities, a function of socio-economic stresses and change, continuing and pervasive inequality, and magnitude of climate change. Nevertheless, adaptations are available, feasible, and Inuit have considerable adaptive capacity. Realizing this adaptive capacity and overcoming adaptation barriers requires policy intervention to: (i) support the teaching and transmission of environmental knowledge and land skills, (ii) enhance and review emergency management capability, (iii) ensure the flexibility of resource management regimes, (iv) provide economic support to facilitate adaptation for groups with limited household income, (v) increase research effort to identify short and long term risk factors and adaptive response options, (vi) protect key infrastructure, and (vii) promote awareness of climate change impacts and adaptation among policy makers.     

Trace metal variations in the shells of Ensis siliqua record pollution and environmental conditions in the sea to the west of mainland Britain

Shells of the pod razor shell (Ensis siliqua) from 13 locations around the west coast of mainland Britain have been analysed by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) for a range of trace metals including Zn, Cd, Pb, U, Ba, Sr and Mg. The trace metal record in these shells is a proxy record for changes in seawater chemistry during the 1990s. Regional variations exist in the median concentrations of the analysed metals. Barium concentrations are related to increased productivity from sewage sludge dumping at sea. Strontium shows a local relationship to salinity, but there is no clear relationship over the study area, instead high Sr is often associated with high Ba, and may reflect ontogenetic factors such as growth rate. Magnesium shows a seasonal variation within individual shells and can be used to calculate sea surface temperatures from groups of shells. Contaminant metals show a clear regional relationship with known sources, thus high Pb and Zn are typically associated with former metal mining areas (e.g. Cardigan Bay, Anglesey), and high Pb, Zn, Cd and U are associated with industrial activity in Liverpool Bay. Anomalies such as the high U in shells from northern Scotland cannot at present be explained. A seasonal variation of Pb is also seen in Cardigan Bay and Liverpool Bay, relating to increased winter fluxes of these metals to the marine environment. The regional distribution of these metals is consistent with known sources of contamination and patterns of seawater migration around the coast of Britain.