The size, mass, and composition of plastic debris in the western North Atlantic Ocean

This study reports the first inventory of physical properties of individual plastic debris in the North Atlantic. We analyzed 748 samples for size, mass, and material composition collected from surface net tows on 11 expeditions from Cape Cod, Massachusetts to the Caribbean Sea between 1991 and 2007. Particles were mostly fragments less than 10 mm in size with nearly all lighter than 0.05 g. Material densities ranged from 0.808 to 1.24 g ml⁻¹, with about half between 0.97 and 1.04 g ml⁻¹, a range not typically found in virgin plastics. Elemental analysis suggests that samples in this density range are consistent with polypropylene and polyethylene whose densities have increased, likely due to biofouling. Pelagic densities varied considerably from that of beach plastic debris, suggesting that plastic particles are modified during their residence at sea. These analyses provide clues in understanding particle fate and potential debris sources, and address ecological implications of pelagic plastic debris.     

A study of ozone in the Colorado mountains

The seasonal and diurnal variations of ozone mixing ratios have been observed at Niwot Ridge. Colorado. The ozone mixing ratios have been correlated with the NO _x (NO+NO₂) mixing ratios measured concurrently at the site. The seasonal and diurnal variations in O₃ can be reasonably well understood by considering photochemistry and transport. In the winter there is no apparent systematic diurnal variation in the O₃ mixing ratio because there is little diurnal change of transport and a slow photochemistry. In the summer, the O₃ levels at the site are suppressed at night due to the presence of a nocturnal inversion layer that isolated ozone near the surface, where it is destroyed. Ozone is observed to increase in the summer during the day. The increases in ozone correlate with increasing NO _x levels, as well as with the levels of other compounds of anthropogenic origin. We interpret this correlation as in-situ or in-transit photochemical production of ozone from these precursors that are transported to our site. The levels of ozone recorded approach 100 ppbv at NO _x mixing ratios of approximately 3 ppbv. Calculations made using a simple clean tropospheric chemical model are consistent with the NO _x -related trend observed for the daytime ozone mixing ratio. However, the chemistry, which does not include nonmethane hydrocarbon photochemistry, underestimates the observed O₃ production.     

Earthquake Rupture at Focal Depth,Part II: Mechanics of the 2004 M2.2 Earthquake Along the Pretorius Fault,TauTona Mine,South Africa

We analyze here the rupture mechanics of the 2004, M2.2 earthquake based on our observations and measurements at focal depth (Part I). This event ruptured the Archean Pretorius fault that has been inactive for at least 2 Ga, and was reactivated due to mining operations down to a depth of 3.6 km depth. Thus, it was expected that the Pretorius fault zone will fail similarly to an intact rock body independently of its ancient healed structure. Our analysis reveals a few puzzling features of the M2.2 rupture-zone: (1) the earthquake ruptured four, non-parallel, cataclasite bearing segments of the ancient Pretorius fault-zone; (2) slip occurred almost exclusively along the cataclasite-host rock contacts of the slipping segments; (3) the local in-situ stress field is not favorable to slip along any of these four segments; and (4) the Archean cataclasite is pervasively sintered and cemented to become brittle and strong. To resolve these observations, we conducted rock mechanics experiments on the fault-rocks and host-rocks and found a strong mechanical contrast between the quartzitic cataclasite zones, with elastic-brittle rheology, and the host quartzites, with damage, elastic–plastic rheology. The finite-element modeling of a heterogeneous fault-zone with the measured mechanical contrast indicates that the slip is likely to reactivate the ancient cataclasite-bearing segments, as observed, due to the strong mechanical contrast between the cataclasite and the host quartzitic rock.     

FeS-Induced Radical Formation and Its Effect on Plasmid DNA

Plasmid DNA was incubated at 25°C with aqueous solutions of dissolved Fe(II), S(-II), and nanoparticulate FeS with a mackinawite structure, FeS_m. At ??0.1 mM total dissolved Fe(II) and S(-II), an increase in the proportion of the relaxed plasmid DNA occurs, through scission of the DNA backbone. In solutions where FeS_m was precipitated, nanoparticulate FeS_m binds to the DNA molecules. In solutions with concentrations below the FeS_m solubility product, nicking of supercoiled pDNA occurs. Plasmid DNA appears to be a sensitive proxy for radical reactions. The reactant is proposed to be a sulfur-based radical produced from the iron-catalyzed decomposition of bisulfide, in a manner analogous to the Fenton reaction. This is further supported by experiments that suggest that sulfide free radicals are produced during the photolysis of aqueous solutions of polysulfides. Supercoiling of DNA affects nearly all DNA?Cprotein transactions so the observation of relaxation of supercoiled forms through reaction with FeS solutions has direct implications to biochemistry. The results of this experimentation suggest that genotoxicity in FeS-rich systems is a further contributory factor to the limited survival of organisms in sulfidic environments. Mutations resulting from the interactions of organisms and mobile elements, such as plasmids, in sediments will also be affected in sulfide-rich environments.     

Provenance analysis of the Paleozoic sequences of the northern Gondwana margin in NW Iberia: Passive margin to Variscan collision and orocline development

The Cantabrian Zone of NW Iberia preserves a voluminous, almost continuous, sedimentary sequence that ranges from Neoproterozoic to Early Permian in age. Its tectonic setting is controversial and recent hypotheses include (i) passive margin deposition along the northern margin of Gondwana or (ii) an active continental margin or (iii) a drifting ribbon continent. In this paper we present detrital zircon U–Pb laser ablation age data from 13 samples taken in detrital rocks from the Cantabrian Zone sequence ranging from Early Silurian to Early Permian in depositional age. The obtained results, together with previously published detrital zircon ages from Ediacaran–Ordovician strata, allow a comprehensive analysis of changing provenance through time. Collectively, these data indicate that this portion of Iberia was part of the passive margin of Gondwana at least from Ordovician to Late Devonian times. Zircon populations in all samples show strong similarities with the Sahara Craton and with zircons found in Libya, suggesting that NW Iberia occupied a paleoposition close to those regions of present-day northern Africa during this time interval. Changes in provenance in the Late Devonian are attributed to the onset of the collision between Gondwana and Laurussia.Additionally, the Middle Carboniferous to Permian samples record populations consistent with the recycling of older sedimentary sequences and exhumation of the igneous rocks formed before and during the Variscan orogeny. Late-Devonian to Permian samples yield zircon populations that reflect topographic changes produced during the Variscan orogeny and development of the lithospheric scale oroclinal buckling.     

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.     

In search of a hidden long-term isolated sub-chondritic Nd/Nd reservoir in the deep mantle: Implications for the Nd isotope systematics of the Earth

Here we search for evidence of the existence of a sub-chondritic ¹⁴²Nd/¹⁴⁴Nd reservoir that balances the Nd isotope chemistry of the Earth relative to chondrites. If present, it may reside in the source region of deeply sourced mantle plume material. We suggest that lavas from Hawai’i with coupled elevations in ¹⁸⁶Os/¹⁸⁸Os and ¹⁸⁷Os/¹⁸⁸Os, from Iceland that represent mixing of upper mantle and lower mantle components, and from Gough with sub-chondritic ¹⁴³Nd/¹⁴⁴Nd and high ²⁰⁷Pb/²⁰⁶Pb, are favorable samples that could reflect mantle sources that have interacted with an Early-Enriched Reservoir (EER) with sub-chondritic ¹⁴²Nd/¹⁴⁴Nd.High-precision Nd isotope analyses of basalts from Hawai’i, Iceland and Gough demonstrate no discernable ¹⁴²Nd/¹⁴⁴Nd deviation from terrestrial standards. These data are consistent with previous high-precision Nd isotope analysis of recent mantle-derived samples and demonstrate that no mantle-derived material to date provides evidence for the existence of an EER in the mantle.We then evaluate mass balance in the Earth with respect to both ¹⁴²Nd/¹⁴⁴Nd and ¹⁴³Nd/¹⁴⁴Nd. The Nd isotope systematics of EERs are modeled for different sizes and timing of formation relative to ε¹⁴³Nd estimates of the reservoirs in the μ¹⁴²Nd = 0 Earth, where μ¹⁴²Nd is ((measured ¹⁴²Nd/¹⁴⁴Nd/terrestrial standard ¹⁴²Nd/¹⁴⁴Nd)−1 * 10⁻⁶) and the μ¹⁴²Nd = 0 Earth is the proportion of the silicate Earth with ¹⁴²Nd/¹⁴⁴Nd indistinguishable from the terrestrial standard. The models indicate that it is not possible to balance the Earth with respect to both ¹⁴²Nd/¹⁴⁴Nd and ¹⁴³Nd/¹⁴⁴Nd unless the μ¹⁴²Nd = 0 Earth has a ε¹⁴³Nd within error of the present-day Depleted Mid-ocean ridge basalt Mantle source (DMM). The 4567 Myr age ¹⁴²Nd-¹⁴³Nd isochron for the Earth intersects μ¹⁴²Nd = 0 at ε¹⁴³Nd of +8 ± 2 providing a minimum ε¹⁴³Nd for the μ¹⁴²Nd = 0 Earth. The high ε¹⁴³Nd of the μ¹⁴²Nd = 0 Earth is confirmed by the Nd isotope systematics of Archean mantle-derived rocks that consistently have positive ε¹⁴³Nd.If the EER formed early after solar system formation (0-70 Ma) continental crust and DMM can be complementary reservoirs with respect to Nd isotopes, with no requirement for significant additional reservoirs. If the EER formed after 70 Ma then the μ¹⁴²Nd = 0 Earth must have a bulk ε¹⁴³Nd more radiogenic than DMM and additional high ε¹⁴³Nd material is required to balance the Nd isotope systematics of the Earth.     

Market intermediaries and rural people in Bolivia's forest products sector: Are trusting partnerships possible?

Decentralization in access to and control of Bolivia's forest resources, coupled with a rising global demand for tropical hardwoods, raises important questions about whether increased trade and community forest management (CFM) initiatives can enable forms of market integration that have more favourable outcomes for rural communities. This paper assesses the prospects for such a transition through an examination of the relationships linking wood product market intermediaries (brokers and buyers) to rural suppliers and forest communities in Bolivia. The analysis centres on whether trust – conceptualized as a power‐laden sociospatial process driven by multiscalar factors – can evolve between buyers and suppliers such that more progressive (sustainable and mutually beneficial) partnerships devolop. Focusing on three types of buyer–supplier relationships in Bolivia – direct ties between wood brokers/buyers and suppliers, nongovernmental organization (NGO) mediated exchange relationships and Forest Stewardship Council (FSC) certification of suppliers – our findings show how trust building initiatives that focus on one scale may fail if factors at other scales create obstacles to collaboration, Given these relational constraints, CFM strategies in Bolivia currently face limitation on their viability as economic development strategies.