Tracer tests, hydrochemical and microbiological investigations as a basis for groundwater protection in a remote tropical mountainous karst area, Vietnam

The Tam Duong karst area in NW Vietnam is among the poorest and remotest regions in the country. The local population largely depends on water from two main karst springs. Due to agricultural activity and untreated domestic wastewaters, the spring water is often microbiologically contaminated. In order to provide a scientific basis for groundwater protection in the area, different field methods have been applied including hydrogeological framework investigations, tracer tests, and hydrochemical and microbiological sampling and analyses. All methods had to be adapted to the conditions of a poor and remote area. These adaptations included, amongst other measures, the use of a portable microbiological water_testing kit and the involvement of the local population in the sampling campaign. The tracer tests showed simple and direct connections between two important swallow holes and the two main springs, and made it possible to determine the linear groundwater flow velocities, which are extremely high (up to 875 m/h). The hydrochemical and microbiological data confirmed the strong impact of the streams sinking into the swallow holes on the spring water quality. Future groundwater source protection strategies should consequently focus on the reduction of polluting activities near the sinking streams and within their catchment areas.     

The October 13, 2020, deadly rapid landslide triggered by heavy rainfall in Phong Dien,Thua Thien Hue,Vietnam

Landslides - At about 12:00 a.m., on October 13, 2020, a rapid rotational landslide induced by rainfall swept over Ranger Station-7 in Phong Xuan commune, Phong Dien district, Thua Thien Hue...     

Groundwater status and associated issues in the Mekong-Lancang River Basin: International collaborations to achieve sustainable groundwater resources

Groundwater is an important and readily available source of fresh water in the Mekong-Lancang River Basin. With a rapid population growth and increasing human activities, an increasing number of countries in the Mekong-Lancang River Basin are experiencing depleted and degraded groundwater supplies. In transboundary river basins, such as the Mekong-Lancang River, prioritizing the use of the shared aquifer by one riparian government may affect the opportunities of other riparian governments and lead to potential water conflicts between neighboring countries. To promote the sharing of strategies and information for the sustainable and equitable use of water resources of the shared basin, international collaborative workshops on groundwater resources have been organized for all Mekong-Lancang River countries. These workshops provide an opportunity to communicate and discuss nationally sensitive issues on groundwater by the associated countries, with topics covering multiple aspects of groundwater, such as the groundwater status in the basin, quality issues, water use conflicts, hydrological information gaps, management policies and capacity building for successful water resource management. Consensus has been reached by all countries on the importance of catchment-based groundwater management and the need for close communication among the countries. Strategies for managing transboundary aquifer issues must foster international collaboration based on the regional network, influence national networks and enhance the capacity to building maps and monitoring systems based on associated databases. The sustainability of water resources cannot be achieved without the integrated involvement and contributions by multiple countries and various stakeholders. Therefore, collaborative workshops provide a great opportunity to further our understanding of the hydrologic processes of the Mekong River Basin, share the benefits of the aquifer and provide a strategy and vision for sustainable water resource management in the Mekong-Lancang River countries.     

Starch-assisted sol–gel synthesis of magnetic CuFe<Subscript>2</Subscript>O<Subscript>4</Subscript> powder as photo-Fenton catalysts in the presence of oxalic acid

Magnetic photo-Fenton catalysts based on spinel CuFe₂O₄ were successfully prepared by the starch-assisted sol–gel method. Various synthetic conditions such as annealing temperatures (700, 800 and 900 °C) and molar ratios of Cu²⁺/Fe³⁺/C₆H₁₀O₅ in the precursor solution (from 1:2:2 to 1:2:4) were, respectively, used in order to study the influences of annealing temperatures and precursor starch contents on the magnetic and catalytic properties of CuFe₂O₄ powders. The photo-Fenton catalytic activity was evaluated via the degradation of methylene blue under ultraviolet and visible irradiation with H₂C₂O₄ as a new oxidizing agent. According to the results, when the annealing temperature increased to 800 °C, the spinel CuFe₂O₄ phase amount was increased, which strongly enhances the photo-Fenton catalytic performance. However, above 800 °C, the catalytic activity was reduced, due to the increase in particle size. The starch content also affected the surface Cu²⁺ content and the particle size of catalysts. The catalyst prepared at 800 °C with the molar Cu²⁺/Fe³⁺/C₆H₁₀O₅ ratio of 1:2:3 presented the best photo-Fenton performance, owing to its highest surface Cu²⁺ content. This catalyst also exhibits ferromagnetic properties (saturation magnetization of 25.836 emu/g and coercivity of 1010.23 Oe), which allows them to be easily separated from the solution by a magnet.     

Experimental investigation on the grain-scale compression behavior of loose wet granular material

The behavior of model granular materials (glass beads) wetted by a small quantity of liquid forming capillary bridges is studied by one-dimensional compression test combined with X-ray computed tomography (XRCT) observation. Special attention is paid to obtain very loose initial states (initial void ratio of about 2.30) stabilized by capillary cohesion. XRCT-based analyses involve spherical particle detection adapted to relatively low-resolution images, which enable heterogeneities to be visualized and microstructural information to be collected. This study on an ideal material provides an insight into the macroscopic compression behavior of wet granular materials based on the microstructural change, such as pore distance distribution, coordination number of contacts, coordination number of neighbors and number of contacts per grain.

     

Toward state-of-the-art techniques in predicting and controlling slope stability in open-pit mines based on limit equilibrium analysis,radial basis function neural network,and brainstorm optimization

Acta Geotechnica - This study aims to propose state-of-the-art techniques in predicting and controlling slope stability in open-pit mines based on limit equilibrium analysis, artificial neural...     

Seismic retrofi tting of RC columns with RC jackets and wing walls with different structural details

An original reinforced concrete(RC) column and four strengthened specimens, two with RC jackets and two with wing walls, were tested in this study. The original column specimen was designed to comply with older(pre-1999) design standards so that the usual detailing defi ciencies in existing school buildings in Taiwan could be simulated. Two different structural details were chosen to fabricate the full-scale specimens for each retrofi tting technique. The study confi rmed that either RC jacketing or the installation of wing walls with two different structural details can effectively improve the stiffness and strength of an existing column. RC jacketing shows a better improvement in energy dissipation and ductility when compared to the columns with wing walls installed. This is because the two RC jacketed columns experienced a fl exural failure, while a shear failure was found in the two columns with the wing walls installed, and thus led to a drastic decrease of the maximum lateral strengths and ductility. Since many factors may affect the installation of a post-installed anchor, it is better to use standard hooks to replace post-installed anchors in some specifi c points when using RC jacketing or installing wing walls.     

Investigation of ground rotational motions caused by direct and scattered P-waves from the 4 March 2008 TAIGER explosion experiment

High-frequency rotational motions of P-waves and coda waves were analysed using rotation rate sensors and strong motion array data from the 4 March 2008 TAiwan Integrated GEodynamics Research (TAIGER) explosion experiment in northeastern Taiwan. Theoretical and observational investigations focussed on the effects of this experiment on the free surface. The main goal of this study was to explore possible applications of combined measurements of artificial explosion-derived translational and rotational motions. Also investigated was the consistent ground rotation observed directly by rotation rate sensors and derived using translational seismic arrays. Common near-source high-frequency rotational motion observations and array-recorded translational motions from one shallow borehole explosion are analysed in this study. Using a half-space assumption of plane P-wave propagation across the recording site, we conclude that: (1) rotational motions induced by direct P-waves interacting with a free surface in theory can be used to estimate wave radial direction, velocity and anisotropic properties; (2) rotational motions derived from scattering are predominant among the observed rotations during the TAIGER explosion experiments and allow us to image the heterogeneous structure of the medium at the investigated site; and (3) rotation sensor measurements undertaken during TAIGER explosion experiments may be affected by cross-axis sensitivities, which need to be considered when using the data obtained during these experiments.     

Modelling the distribution of hard seabed using calibrated multibeam acoustic backscatter data in a tropical,macrotidal embayment: Darwin Harbour,Australia

Spatial information on the distribution of seabed substrate types in high use coastal areas is essential to support their effective management and environmental monitoring. For Darwin Harbour, a rapidly developing port in northern Australia, the distribution of hard substrate is poorly documented but known to influence the location and composition of important benthic biological communities (corals, sponges). In this study, we use angular backscatter response curves to model the distribution of hard seabed in the subtidal areas of Darwin Harbour. The angular backscatter response curve data were extracted from multibeam sonar data and analysed against backscatter intensity for sites observed from seabed video to be representative of “hard” seabed. Data from these sites were consolidated into an “average curve”, which became a reference curve that was in turn compared to all other angular backscatter response curves using the Kolmogorov–Smirnov goodness-of-fit. The output was used to generate interpolated spatial predictions of the probability of hard seabed (p-hard) and derived hard seabed parameters for the mapped area of Darwin Harbour. The results agree well with the ground truth data with an overall classification accuracy of 75% and an area under curve measure of 0.79, and with modelled bed shear stress for the Harbour. Limitations of this technique are discussed with attention to discrepancies between the video and acoustic results, such as in areas where sediment forms a veneer over hard substrate.