Desiccation shrinkage of non‐clayey soils: multiphysics mechanisms and a microstructural model

Analysis of macroscopic desiccation shrinkage experiments indicates that most, but not all of the shrinkage during drying occurs while soil is still saturated. Shrinkage practically ceases and air starts to penetrate the soil, when the water content is still quite high, for example, above 20% for the tested soils. The remaining, unsaturated drying process occurs with a much‐reduced shrinkage rate. In this context, we examine data of the pore system evolution as represented by the mercury porosimetry experimental results. The process is then modeled as a two‐stage process of deformation and evacuation of a two‐tube vessel system driven by the external evaporation flux. In the first stage, Poiseuille flow occurs through the vessels. The amount of water evaporated in this stage equals to the reduction of volume of the vessel through the deformation of its walls. This stage ends when a negative water pressure (suction) required to further deform the vessel reaches a critical value at which air enters the pore space. Two physical interpretation of such threshold are discussed. In the subsequent stage, evaporation proceeds with a receding liquid/vapor interface starting from the open end, incrementally emptying the vessel but with a marginal water flow and vessel deformation. The leading variables of the process are identified, and a quantifiable multiphysics meso‐scale scenario of models is established. Copyright © 2012 John Wiley & Sons, Ltd.     

An iterative method for array pattern synthesis

The authors propose a novel iterative method for synthesizing radiation patterns of linear arrays with arbitrary sidelobe envelopes, with nonisotropic elements, and with nonuniform spacing between elements. Various design examples are presented and compared with other methods. It is shown that the proposed iterative method converges rapidly and yields superior results over other methods     

Anthropogenic changes in the sediment composition of Lake Gości& aogon;ż (central Poland), during the last 330 yrs*

According to historical sources, the development of settlement around Lake Goci& aogon; during the last 330 yrs was intense at two time periods: the second half of the 1700's, and from ca. 1880 until 1944. The small farms were then abandoned, following which the lake surroundings were planted with forest trees. The presented study of human influence on the lake ecosystem and surrounding vegetation has been based on analyses of general sediment composition and its chemistry, pollen, Cyanobacteria, Chlorophyceae, Rotatoria, Cladocera, and a preliminary diatom survey. The history of human impact has been divided into four phases: 1. Phase of small local hamlets (before ca. 1770): The human impact was rather moderate then, but the cultivation of Canabis sativa, Secale cereale and later of Fagopyrum is evidenced from that time. 2. Phase of Hollandii settlement (ca. 1770-1863). Its influence is indicated first by the recession of deciduous wood (Corylus, Carpinus) stands, which triggered drastic drop of calcium in sediments. The development of rural economy in the area, including, an extension of agriculture (Secale and other cereals, crucifers, potatoes), and animal breeding based partly on grazing in the forest, is evidenced only after 1820. 3. Phase of German colonization (1863-1944): In the early periods (before 1910) the pollen spectra do not document any essential change in the type of farming, however, a serious disturbance of the lake ecosystem and sediment chemistry is evidenced by the blooms of Araphidinae diatoms and Tetraedron minimum, a maximum frequency of Bosmina longirostris, disturbances of the regular spring blooms of Chrysophyceae, appearance of vivianite, distinct maxima of organic matter, potassium, and iron concentration in sediments and an increase of the sedimentation rate. An intensification of agricultural activities commenced around 1910; woods, including also pinewoods, were then heavily devastated, and farming extended on poor soils, what was symptomatic for the general poverty of population. Coincidently in the lake, Centriceae showed blooms, Araphidinae diatoms and Tetraedron minimum developed, and the content of potassium, iron and phosphorus increased substantially, indicating altogether rising eutrophication. 4. Phase of restoration of the natural landscape (after 1945): The farm degradation from ca. 1944 is very weakly expressed in pollen data, which show a substantial fall of farming indicators from 1953/6 only, when the whole area was used for forest plantation. It was accompanied by a certainly spontaneous development of Betula and Alnus woods, this process progressing till recent time. The gradual extinction of farming activity near Lake Goci was accompanied by abrupt changes in the lake ecosystem, expressed by the restored blooms of Chrysophyceae expansion of planktonic Cladocera, rapid decline of phosphorus and extinction of vivianite from sediments. As documented by the drop of Cu/Zn ratio, lake hypolimnion has been weakly oxidized since 1949, what was probably responsible for the drop of Fe and Mn content in sediments. Increasing strength of overturns affected preservation of laminae in sediments, which almost completely disappeared after 1966.     

Processes that can disturb the chronostratigraphy of laminated sediments and pollen deposition

The sediment trap technique was used to study the sedimentation processes in two parts of Lake Goci, central Poland, the deep of the main basin and the shallow bay area. From field and lab data was noted that seasonal and annual deposition of pollen grains on the lake bottom was disturbed in the main basin by an increase in water mass dynamics and by resuspension and focusing. Greater concordance between pollen sedimentation and the flowering periods of plants was found in the bay area, where sediment resuspension took place sporadically and with less intensity, compared to the main basin. Futhermore, it is suggested that resuspension of pollen can occur even if laminated sediments are formed, a process which therby diminishes the chronostratigraphic value of sediments and pollen analyses.     

Changes in PM<Subscript>10</Subscript> concentration due to large-scale rainfall

This paper is concerned with the estimation of the removal efficiency of PM₁₀ by large-scale precipitation under no-wind conditions in a background (rural) and urban areas. The changes in PM₁₀ concentrations before, during and after the presence of rainfall were studied from 2007 to 2013. The study was conducted in two different locations identified with regard to air quality. DAVIS weather stations were used to determine the meteorological conditions. The concentration of PM₁₀ was calculated with the use of the gravimetric reference method. Two hundred and ninety-nine measurement series were carried out. A linear relationship was found between the intensity and duration of rainfall and the value of the removal coefficient (ΔC). It was proved that except light rains, for the near-to-ground troposphere, the effectiveness of the removal of PM₁₀ (ΔC) did not assume different values at various locations for rainfall with the same intensity and duration. It was found that a temporary interaction of the effect of the purification by wet deposition was being minimised in areas characterised by low air quality. It was confirmed that intense rains resulted in the maintenance of higher values of air quality.     

Lithospheric structure of the Trans-European Suture Zone along the TTZ–CEL03 seismic transect (from NW to SE Poland)

The large-scale CELEBRATION 2000 seismic experiment investigated the velocity structure of the crust and upper mantle between western portion of the East European Craton (EEC) and the eastern Alps. This area comprises: the Trans-European Suture Zone, the Carpathian Mountains, the Pannonian Basin and the Bohemian Massif. This experiment included 147 chemical shots recorded by 1230 seismic stations during two deployments. Good quality data along 16 main and a few additional profiles were recorded. One of them, profile CEL03, was located in southeastern Poland and was laid out as a prolongation of the TTZ profile performed in 1993. This paper focuses on the joint interpretation of seismic data along the NW–SE trending TTZ–CEL03 transect, located in the central portion of the Trans-European Suture Zone. First arrivals and later phases of waves reflected/refracted in the crust and upper mantle were interpreted using two-dimensional tomographic inversion and ray-tracing techniques. This modelling established a 2-D (quasi 3-D) P-wave velocity lithospheric model. Four crustal units were identified along the transect. From northwest to southeast, thickness of the crust varies from 35 km in the Pomeranian Unit (NW) to 40 km in the Kuiavian Unit, to 50 km in the Radom–Łysogóry Unit and again to 43 km in the Narol Unit (SE). The first two units are thought to be proximal terranes detached from the EEC farther to the southeast and re-accreted to the edge of the EEC during the Early Palaeozoic. The origin of the remaining two units is a matter of dispute: they are either portions of the EEC or other proximal terranes. In the area of the Polish Basin (first two units), the P-wave velocity is very low (V_p < 6.1 km/s) down to depths of 15–20 km indicating that a very thick sedimentary and possibly volcanic rock sequence, whose lower portion may be metamorphosed, is present. The velocity beneath the Moho was found to be rather high, being 8.25 km/s in the northwestern portion of the transect, 8.4 km/s in the central sector, and 8.1 km/s in the southeastern sector.     

On Choosing Effective Elasticity Tensors Using a Monte-Carlo Method

A generally anisotropic elasticity tensor can be related to its closest counterparts in various symmetry classes. We refer to these counterparts as effective tensors in these classes. In finding effective tensors, we do not assume a priori orientations of their symmetry planes and axes. Knowledge of orientations of Hookean solids allows us to infer properties of materials represented by these solids. Obtaining orientations and parameter values of effective tensors is a highly nonlinear process involving finding absolute minima for orthogonal projections under all three-dimensional rotations. Given the standard deviations of the components of a generally anisotropic tensor, we examine the influence of measurement errors on the properties of effective tensors. We use a global optimization method to generate thousands of realizations of a generally anisotropic tensor, subject to errors. Using this optimization, we perform a Monte Carlo analysis of distances between that tensor and its counterparts in different symmetry classes, as well as of their orientations and elasticity parameters.     

A new magnetic index based on the external part of vertical geomagnetic variations

Variations of geomagnetic components X, Y, and Z recorded in 19 Intermagnet European observatories in 2004 were analysed. The original data from all observatories were preliminarily processed. In the first step, periods longer than three hours were filtered out. In the second step, variations of vertical geomagnetic component Z were separated into external and internal parts. We introduced a non-dimensional index η defined as the square root of a ratio of the energy of the external part of the vertical component to that of the horizontal components. Maps of the surface distribution of a new magnetic index η for the area of Europe at selected time periods were created, and their time changes are presented. The time changes of η for selected observatories are also shown. Moreover, we discuss a very interesting phenomenon we discovered, that has never been described in geophysical literature. Namely, in the recordings of all the observatories we noticed the presence of very regular variations, observed almost exclusively in the vertical component Z, which is quite unusual. These regular variations occur in the form of sinusoidal “wave packets”. The amplitudes of these variations do not depend on the geomagnetic latitude and appear in the records of all the observatories we analyzed. They occur in quiet days, which suggests that their source is in the ionosphere.     

Formation of drying crack patterns in soils: a deterministic approach

Soils, as well as most of deformable multiphase porous materials, are likely to suffer from desiccation cracking, leading to the formation of regular crack patterns affecting their permeability. The ensuing crack spacing has often been related to a concept sometimes called “sequential infilling”: it is assumed that desiccation cracks are formed by successive generations. However, such a concept does not consider the pattern of a simultaneous crack formation at a given moment. Using our desiccation cracking test results and their numerical simulation, we propose a consistent explanation for the formation of desiccation crack patterns in soils. We show that the “sequential infilling” concept is suitable only when the position of the crack(s) clearly stems from the stress field. To derive an estimate of the desiccation crack spacing, the overall energy of the system needs to be considered. Statistical variability should be superimposed on the mean deterministic conditions discussed here.     

An approach for the geophysical assessment of fissuring of estuary and river flood embankments: validation against two case studies in England and Scotland

This paper proposes a two-stage geophysical approach to map the vertical cracking and the structural integrity of flood embankments made up of clay geomaterials susceptible to fissuring. The first stage is based on a ‘coarse-resolution’ investigation using conventional electrical resistivity tomography (ERT) equipment to identify the fissured zones in the embankment. This step is complemented by an additional geophysical technique, electromagnetic, to verify the ERT measurements. The second stage is based on a ‘high-resolution’ investigation using a miniature ERT system previously developed at the laboratory scale for detailed mapping of the fissure patterns. The ‘coarse-resolution’ stage is the major focus of this paper and was validated against two case studies in England and Scotland. Longitudinal ERT survey provided a tomographic picture of the upper desiccated zones of the embankments and fissured areas in 2-D, validating the range of resistivity results obtained previously on a fissured clay model in the laboratory. A transversal embankment resistivity tomography was also completed to show the positions of fissured zones in detail in the field. The electromagnetic technique as a fast screening tool allowed cross checking the ERT results and was also efficient in detecting high and low conductivity zones, indicating areas of potential weakness during flash floods and heavy rain. The southern embankment in England showed more fluctuations in the conductivity and resistivity than the north embankment in Scotland, likely to be due to the differences in climate, vegetation and location characteristics between the two sites. Conclusions were also drawn on the potential weaknesses for both embankments and the effect of vegetation on conductivity measurements.