The Influence of Wellbore Inflow on Electromagnetic Borehole Flowmeter Measurements

This paper describes a combined field, laboratory, and numerical study of electromagnetic borehole flowmeter measurements acquired without the use of a packer or skirt to block bypass flow around the flowmeter. The most significant finding is that inflow through the wellbore screen changes the ratio of flow through the flowmeter to wellbore flow. Experiments reveal up to a factor of two differences in this ratio for conditions with and without inflow through the wellbore screen. Standard practice is to assume the ratio is constant. A numerical model has been developed to simulate the effect of inflow on the flowmeter. The model is formulated using momentum conservation within the borehole and around the flowmeter. The model is embedded in the MODFLOW-2000 ground water flow code.     

The Application of Petroleum Hydrocarbon Fingerprint Characterization in Site Investigation and Remediation

Tremendous resources have been and continue to be spent investigating and remediating petroleum hydrocarbon compounds (PHCs) in soil and ground water. Investigating and planning a remedial strategy for sites affected by PHCs is often a challenging task because of the complex chemical nature of the PHCs. the complex regulatory environment related to PHC cleanup, and the use of analytical methods that provide quantitation but not identification of PHCs. From a technical standpoint, the PHC impacting soil and/or ground water is frequently inadequately characterised, both in identification as well as in is general properties (solubility, toxicity). From a regulatory standpoint, promulgated or recommended total petroleum hydrocarbon (TPH) cleanup levels generally relate to assumed properties of specific unweathered products and are inconsistent among different agencies and regions. This produces a prime situation for unwillingly spending more resources on investigation or remediation than may be necessary, especially when the PHC in the subsurface has different properties from unweathered products such as gasoline or diesel.
Accurately identifying the PHC and its nature, a process known as fingerprint characterization, is critical to the determination of appropriate regulatory goals and design of cost-effective remedial approaches. This paper presents several case studies in which fingerprint characterization made a significant difference in the project outcome. In each instance the nature of the organic material was better understood, the regulatory cleanup levels were negotiated based on the nature of the material, and a remedial approach was implemented that differed significantly from and was generally less costly than what would have been required without fingerprint characterization data.     

A Method for Installing Piezometers in Large Cobble Bed Rivers

An impact drive point method is described for emplacing piezometers in a cobble river bottom where this has previously been difficult without the use of drilling rigs. To force the drive point piezometers through coble, the vibrational impact of an air-powered hammer was carried directly to the drive point by the use of an internal drive rod. After insertion to depth, the drive rod was removed from the lower portion of the piezometer and a standpipe was added to extend the piezometer above the river level. Piezometers installed in this way have permitted water quality analysis and dynamic measurement of vertical potentials in cobble sediments ranging in size from 2.5 to >30 cm and the method has been successfully used in the Columbia River, USA, and Töss River, Switzerland. This innovative method provides information on the hydrodynamics of pore water in highly permeable, cobble deposits that are common in high-energy river and lake bottoms. Piezometers installed using the internal drive rod method facilitate the assessment of the temporal and spatial dynamics of recharge and discharge at the ground water/surface water interface and analyses of the ecological connectivity between the hyporheic zone and surface water of rivers and streams. This information will lead to improved management decisions related to our nation's ground water and surface water supplies.     

Estimating australian forest fire danger under conditions of doubled carbon dioxide concentrations

The most appropriate indices with which to quantify Australian bushfire danger are the McArthur fire danger meters. These meters use meteorological information to produce a fire danger index that is directly related to the chance of a fire starting - and to the severity of a fire once it has started. The Mark 5 forest-fire danger meter uses air temperature, relative humidity and wind speed, plus a drought factor that is calculated using daily rainfall and temperature information.Three years of daily data generated from the CSIRO four-level general circulation model, and thirty years of daily data generated from the CSIRO nine-level model were used to estimate the daily McArthur forest fire danger index for simulations corresponding to present conditions, and to those corresponding to doubled atmospheric CO₂. The performance of these models with respect to fire danger was tested by comparing the fire danger index for Sale (in the Eastern part of Victoria, South-eastern Australia) calculated from analysis of daily climatological data with the modelled annual cumulative forest fire danger index for the grid point that was representative of Sale. Data from both models for all Australian grid points were also examined. Both models predict an increase in fire danger over much of Australia for their doubled CO₂ scenarios.The results from the models confirm that annually averaged daily relative humidity is the single most important variable in the estimation of forest fire danger on an annual basis, yet the models tend to produce relative humidities that are slightly too low so that the fire danger is overestimated. A simple one-box model of evaporation indicates that the value of relative humidity to be expected under an altered climatic regime depends on the modelled relation between actual and potential evaporation, the present values of relative humidity and evaporation rate, as well as on the expected changes in wind speed.     

Timing and mechanisms controlling evaporite diapirism on Ellef Ringnes Island,Canadian Arctic Archipelago

The Permo‐Carboniferous to Eocene Sverdrup Basin in Canada's Arctic Archipelago is strongly influenced by evaporite diapirism. However, salt structures within the basin have not been extensively investigated recently due to their remote location. This study includes the interpretation of legacy seismic reflection and borehole data to characterize the geometry of selected evaporite domes, and 1D backstripping of wells to investigate tectonic and sedimentary influences on diapirism. Extensional rift‐structures appear to have played a significant role in the formation of evaporite domes by triggering and directing salt movement. Diapirism was initiated by at least the Middle Triassic and continued to develop during the Mesozoic. Differential loading of salt on opposing east–west dome margins led to their present day asymmetric geometries. Diapir growth rates in the Mesozoic were closely linked to the rate of sedimentation and influenced by regional tectonism.     

Structural and Functional Composition of Benthic Nematode Assemblages During a Natural Recovery Process of <Emphasis Type="Italic">Zostera noltii</Emphasis> Seagrass Beds

In 2008, the stable seagrass beds of the Mira estuary (SW Portugal) disappeared completely; however, during 2009, they have begun to present early symptoms of natural recovery, characterised by a strongly heterogeneous distribution. This study was designed to investigate the spatial and temporal variability patterns of species composition, densities and trophic composition of the benthic nematode assemblages in this early recovery process, at two sampling sites with three stations each and at five sampling occasions. Because of the erratic and highly patchy seagrass recovery and the high environmental similarity of the two sampling sites, we expected within-site variability in nematode assemblages to exceed between-site variability. However, contrary to that expectation, whilst nematode genus composition was broadly similar between sites, nematode densities differed significantly between sites, and this between-site variability exceeded within-site variability. This may be linked to differences in the Zostera recovery patterns between both sites. In addition, no clear temporal patterns of nematode density, trophic composition and diversity were evident. Nematode assemblages generally resembled those of other estuarine muddy intertidal areas, which have a high tolerance of stress conditions.