Circulation anomalies associated with tropical-temperate troughs in southern Africa and the south west Indian Ocean

Daily rainfall variability over southern Africa (SA) and the southwest Indian Ocean (SWIO) during the austral summer months has recently been described objectively for the first time, using newly derived satellite products. The principle mode of variability in all months is a dipole structure with bands of rainfall orientated northwest to southeast across the region. These represent the location of cloud bands associated with tropical temperate troughs (TTT). This study objectively identifies major TTT events during November to February, and on the basis of composites off NCEP reanalysis data describes the associated atmospheric structure. The two phases of the rainfall dipole are associated with markedly contrasting circulation patterns. There are also pronounced intra-seasonal variations. In early summer the position of the temperate trough and TTT cloud band alternates between the SWIO and southwest Atlantic. In late summer the major TTT axis lies preferentially over the SWIO, associated with an eastward displacement in the Indian Ocean high. In all months, positive events, in which the TTT cloud band lies primarily over the SWIO, are associated with large-scale moisture flux anomalies, in which convergent fluxes form a pronounced poleward flux along the cloud band. This suggests that TTT events are a major mechanism of poleward transfer of energy and momentum. Moisture transport occurs along three principle paths: (1) the northern or central Indian Ocean (where anomalous fluxes extend eastward to the Maritime Continent), (2) south equatorial Africa and the equatorial Atlantic, (3) from the south within a cyclonic flow around the tropical-temperate trough. The relative importance of (2) is greatest in late summer. Thus, synoptic scale TTT events over SA/SWIO often result from large-scale planetary circulation patterns. Hovmoeller plots show that TTT development coincides with enhanced tropical convection between 10°–30°E (itself exhibiting periodicity of around 5 days), and often with convergence of eastward and westward propagating convection around 40°E. Harmonic analysis of 200 hPa geopotential anomalies show that TTT features are forced by a specific zonally asymmetric wave pattern, with wave 5 dominant or significant in all months except February when quasi-stationary waves 1, 2 and 3 dominate. These findings illustrate the importance of tropical and extratropical dynamics in understanding TTT events. Finally, it is suggested that in November–Januar TTT rainfall over SA/SWIO may be in phase with similar rainfall dipole structures observed in the South Pacific and South Atlantic convergence zones. Received: 11 August 1998 / Accepted: 28 May 1999     

A composite spessartite–appinite intrusion from Port-na-Blagh,County Donegal,Ireland

A sheet-like appinite from Breaghy Head, North Donegal, is closely associated with a spessartite intrusion. Field, mineralogical, and geochemical similarities indicate that the parent magmas were very similar, and the appinite magma may have been derived from the spessartite by small degrees of crystal fractionation. The appinite is divided into an amphibole-rich lower part and a felsic upper part; the mineralogical contrast between the two is best explained by two-pulse intrusion of a batch of spessartitic magma within which amphibole and pyroxene had already segregated due to crystal settling or flow sorting. Unlike other Caledonian appinites, the Breaghy Head intrusion is not one of a cluster, and appears to be an isolated development. Possible reasons for its location are discussed.     

Small Purge Method to Sample Vapor from Groundwater Monitoring Wells Screened Across the Water Table

Groundwater monitoring wells are present at most hydrocarbon release sites that are being assessed for cleanup. If screened across the vadose zone, these wells provide an opportunity to collect vapor samples that can be used in the evaluation of vapor movement and biodegradation processes occurring at such sites. This paper presents a low purge volume method (modified after that developed by the U.S. EPA) for sampling vapor from monitoring wells that is easy to implement and can provide an assessment of the soil gas total petroleum hydrocarbon (TPH) and O₂ concentrations at the base of the vadose zone. As a result, the small purge method allows for sampling of vapor from monitoring wells to support petroleum vapor intrusion (PVI) risk assessment. The small purge volume method was field tested at the Hal's service station site in Green River, Utah. This site is well‐known for numerous soil gas measurements containing high O₂ and high TPH vapor concentrations in the same samples which is inconsistent with well‐accepted biodegradation models for the vapor pathway. Using the low purge volume method, monitoring wells were sampled over, upgradient, and downgradient of the light nonaqueous phase liquid (LNAPL) footprint. Results from our testing at Hal's show that vapor from monitoring wells over LNAPL contained very low O₂ and high TPH concentrations. In contrast, vapor from monitoring wells not over LNAPL contained high O₂ and low TPH concentrations. The results of this study show that a low purge volume method is consistent with biodegradation models especially for sampling at sites where low permeability soils exist in and around a LNAPL source zone.     

Impacts of a Rural Subdivision on Groundwater Quality: Results of Long-Term Monitoring

A rural subdivision in south central Wisconsin was instrumented with monitoring wells and lysimeters before, during, and after its construction to examine the impacts of the unsewered subdivision on groundwater quality and quantity. Prior to construction, the 78-acre (32 ha) site was farmland. Sixteen homes were constructed beginning in 2003. Initial monitoring from 2002 to 2005 showed that groundwater beneath the site had been impacted by previous agricultural use, with nitrate-N values as high as 30 mg/L and some detections of the herbicide atrazine. Our 12-year study shows that the transition from agricultural to residential land use has changed groundwater quality in both negative and positive ways. Although groundwater elevations showed typical seasonal fluctuations each year, there were no measurable changes in groundwater levels or general flow directions during the 12-year study period. Chloride values increased in many wells, possibly as a result of road salting or water softener discharge. Nitrate concentrations varied spatially and temporally over the study period, with some initial concentrations substantially above the drinking water standard. In some wells, nitrate and atrazine levels have declined substantially since agriculture ceased. However, atrazine was still present at trace concentrations throughout the site in 2014. Wastewater tracers show there are small but detectable impacts from septic effluent on groundwater quality. Particle traces based on a groundwater flow model are consistent with the hypothesis that septic leachate has impacted groundwater quality.     

An Instrument for the Determination of a Hydropneumograph in a Bubbling Spring

In order to enable greater accuracy in the determination of the mass discharge of gas and water-gas ratios (WGR) in groundwater from springs, we have developed a field-deployable instrument using commercially available components to independently measure the gas and water mass flow rates in springs with bubbling mixed-phase flow. Collecting and measuring the free gas phase will allow for further compositional analysis that may be useful in improving gas-derived parameters such as recharge temperature and age, as well as quantification of methanogenesis and flux of crustal/mantle gasses. By installing a phase separator at the spring discharge, a thermal mass flow sensor is utilized to measure the gas flow rate (ebullition + flux) generated from a spring. The water flow rate is determined by a standard weir. Field performance of the device was tested on a spring discharging from the Arbuckle-Simpson aquifer near the town of Connerville in south-central Oklahoma, USA.     

MATLAB Algorithm Availability Simulation Tool

This paper describes a set of MATLAB functions currently being developed for Space Based Augmentation System (SBAS) availability analysis. This toolset includes simulation algorithms that are constantly being developed and updated by various working groups. This set of functions is intended for use as a fast, accurate, and highly customizable experimental test bed for algorithm development. A user-friendly interface has also been developed for the tool. It is open source and can be downloaded from the Stanford GPS Research Laboratory web site (). Therefore, it provides a common ground for different working groups to compare their results. This paper demonstrates the utility of this toolset by analyzing the SBAS service volume models for the Conterminous United States. The paper describes the functionality provided within the software, and shows an example set of contour plots which are the means for investigating how different algorithms and parameters impact availability.     

Evaluating weather observations and the Climate Forecast System Reanalysis as inputs for hydrologic modelling in the tropics

Correctly representing weather is critical to hydrological modelling, but scarce or poor quality observations can often compromise model accuracy. Reanalysis datasets may help to address this basic challenge. The Climate Forecast System Reanalysis (CFSR) dataset provides continuous, globally available records, and CFSR data have produced satisfactory hydrological model performance in some temperate and monsoonal locations. However, the use of CFSR for hydrological modelling in tropical and semi‐tropical basins has not been adequately evaluated. Taking advantage of exceptionally high rainfall station density in the catchments of the Rio Grande de Loiza above San Juan, Puerto Rico, we compared model performance based on CFSR records with that based on publicly available weather stations in the Global Historical Climate Network (GHCN, n = 21) and on a dataset of rainfall records maintained by the United States Geological Survey Caribbean Water Science Center (USGS, n = 24). For an implementation of the Soil and Water Assessment Tool (SWAT) with subbasins defined at 11 streamflow gages, uncalibrated measures of Nash–Sutcliffe efficiency (NSE) were >0 at 8 of 11 gages using USGS precipitation data for daily simulations over the period 1998–2012, but were <0 using GHCN weather station records (8 of 11) and CFSR reanalysis data (9 of 11). Autocalibration of individual SWAT models for each of the 11 basins against each of the available weather datasets yielded NSE values > 0 using all precipitation inputs, including CFSR. However, the ground weather station closest to the geographic basin centre produced the highest NSE values in only 5 of 11 cases. The spatially interpolated CFSR data performed as well or better than single ground observations made further than 20–30 km, and sometimes better than individual weather stations <10 km from the basin centroid. In addition to demonstrating the need to evaluate available weather inputs, this research reinforces the value of CFSR data as a means to supplement ground records and consistently determine a baseline for hydrologic model performance. Copyright © 2016 John Wiley & Sons, Ltd.     

The appraisal of surface orbital vibrators with buried geophone array for permanent reservoir monitoring

Time-lapse seismic is one of the main methods for monitoring changes in reservoir conditions caused by production or injection of fluids. One approach to time-lapse seismic is through permanent reservoir monitoring, whereby seismic sources and/or receivers are permanently deployed. Permanent reservoir monitoring can offer a more cost-effective and environmentally friendly solution than traditional campaign-based surveys that rely on temporarily deployed equipment while facilitating more frequent measurements. At the CO2CRC Otway Project, surface orbital vibrators were coupled to a buried geophone array to form a permanent reservoir monitoring system. These are fixed position seismic sources that provide both P and S waves using induction motor-driven eccentric masses. After an initial injection of CO₂ in February 2016, five months of continuous seismic data were acquired, and reflection imaging was used to assess the system performance. Analysis of the data showed the effects of weather variations on the near-surface conditions and the sweep signatures of surface orbital vibrators. Data processing flows of the continuous data was adapted from Vibroseis four-dimensional data processing flows. Ground roll proved a significant challenge to data processing. In addition, variations in the surface wave pattern were linked to major rainfall events. For the appraisal of surface orbital vibrators in imaging, a Vibroseis four-dimensional monitor survey data with similar geometry was also processed. Surface orbital vibrators are observed to be reliable sources with a potential to provide a repeatable signal, especially if the ground roll should fall outside the target window of interest. To guide future permanent reservoir monitoring applications, a repeatability analysis was performed for the various key data processing steps.