A device for measuring downwearing rates on cohesive shore platforms

The device described in this paper, known as the traversing erosion beam, is believed to be the first to be designed specifically for measuring rates of downwearing of cohesive foreshores, such as clay shore platforms, under high‐energy wave conditions. It is primarily constructed of Flexlink Aluminium Structural System components and consists of a horizontal beam with a main leg and two further support legs. A sliding ‘dolly’ module is moved along the beam at precise intervals using a longitudinal scale as a reference. The topographic profile of the measurement surface is transferred to the dolly by a vertical sliding steel alloy rod, from which the relative height differences are measured by a separate engineer's digital height gauge placed on the dolly. The main leg of the device fits into a marine grade stainless steel box, which is deeply embedded into the foreshore or shore platform to act a permanent datum. The box is robust and can be expected to have a lifetime of at least a year, and possibly even five years or more. Sample data are provided from a clay shore platform at Warden Point in the Isle of Sheppey, Kent (UK), which demonstrate that the TEB can provide information on seasonal as well as annual rates of downwearing. The device has also been tested successfully on a peat and clay foreshore at Pett Level in Sussex and on a shore platform cut in glacial till at Easington, Yorkshire. Copyright © 2007 John Wiley & Sons, Ltd.     

Progress in Carrier Phase Time Transfer

The progress of the joint Pilot Project for time transfer, formed by the International GPS Service (IGS) and the Bureal International des Poids et Mesures (BIPM), was recently reviewed. Three notable milestones were set. (1) The IGS will implement, at least in a test mode, an internally realized time scale based on an integration of combined frequency standards within the IGS network. This will eventually become the reference time scale for all IGS clock products (instead of the current GPS broadcast time). (2) A new procedure for combined receiver and satellite clock products will be implemented officially in November 2000. Receiver clocks are an entirely new product of the IGS. (3) The BIPM will coordinate an effort to calibrate all Ashtech Z12-T (and possibly other) receivers suitable for time transfer applications, either differentially or absolutely. Progress reports will be presented publicly in the spring 2001. ? 2001 John Wiley & Sons, Inc.     

210Pb and 137Cs dating methods in lakes: A retrospective study

²¹⁰Pb has been used for more than two decades to provide the geochronology of annually deposited sediments and to construct pollution histories. Evidence from some lakes suggests that this radionuclide may be adequately mobile to compromise dating reliability. This study provides one test of that possibility by comparing recent measurements of ²¹⁰Pb and trace metals to ones carried out more than 20 yrs in the past. ¹³⁷Cs dating is used to confirm sediment accumulation rates in the recent cores. In the three Connecticut, USA, lakes studied, sediment accumulation rates changed abruptly to higher values between 40-50 yrs ago (increasing by factors of 2.2, 2.9, and 3.0). In all three lakes, rates calculated from ²¹⁰Pb distributions both above and below this horizon agreed, within measurement uncertainty, in recent and older cores. Furthermore, when the older data were corrected for 20 yrs of burial, the changes in slope in ²¹⁰Pb distributions occurred at the same depth in each pair of cores. The depth of sharp peaks in concentrations of trace metals also matched. In general, this evidence supports the idea that sediments in these lakes have simply been buried, without significant diagenetic remobilization of ²¹⁰Pb and trace metals . Nevertheless, some important differences were also observed. For two of the three lakes, there was a significant difference in average sediment accumulation rate during the past 33 yrs as calculated from ¹³⁷Cs and ²¹⁰Pb in the recent cores. Most potential causes for this difference can be ruled out, and it appears that one of the two nuclides is remobilized compared to the other. There were also significant differences in the total inventories of both ²¹⁰Pb and trace metals (both up to 2 ×) between recent and older cores in some cases. This may be due to dissimilar sediment focusing, since it is not known for certain whether the new cores were collected at exactly the same sites as in the past.     

Economics and the ‘greenhouse effect’

There is growing scientific and public concern that increasing concentrations of greenhouse gases in the atmosphere will produce global warming and other climatic changes. Although economic activity is the main source of greenhouse gas emissions, information and incentive problems make it difficult to translate concern about global warming into economic behaviour and policy conducive to reducing emissions. The paper considers a set of near term (carbon tax), intermediate term (afforestation, energy efficiency) and long term (new non-fossil fuel technologies) strategies for reducing CO₂ in the atmosphere. Each strategy has useful attributes, but shortcomings or limitations too. While the near term and intermediate term strategies can slow and perhaps reverse the growth of CO₂ emissions, only a successful long term strategy of fostering the development of some promising non-fossil fuel technologies, such as solar and solar-hydrogen, can eventually halt the build-up of CO₂ in the atmosphere. Moreover, public investment in the development of new non-fossil fuel technologies would largely obviate the information and incentive problems that currently stand in the way of an economically viable greenhouse policy.     

Thermal evolution of the Tertiary Shimanto Belt, Muroto Peninsula, Shikoku, Japan

Abstract The Shimanto accretionary complex on the Muroto Peninsula of Shikoku comprises two major units of Tertiary strata: the Murotohanto Sub-belt (Eocene-Oligocene) and the Nabae Sub-belt (Oligocene-Miocene). Both sub-belts have been affected by thermal overprints following the peak of accretion-related deformation. Palaeotemperatures for the entire Tertiary section range from ～ 140 to 315°C, based upon mean vitrinite reflectance values of 0.9–5.0%R_m. Values of illite crystallinity index are consistent with conditions of advanced diagenesis and anchimetamorphism. Illite/mica b₀ lattice dimensions indicate that burial pressures were probably no greater than 2.5kbar. In general, levels of thermal maturity are higher for the Murotohanto Sub-belt than for the Nabae Sub-belt. The Eocene-Oligocene strata also display a spatial decrease in thermal maturity from south to north and this pattern probably was caused by regional-scale differential uplift following peak heating. Conversely, the palaeothermal structure within the Nabae Sub-belt is fairly uniform, except for the local effects of mafic intrusions at the tip of Cape Muroto. There is a paleotemperature difference of ～ 90°C across the boundary between the Murotohanto and Nabae Sub-belts (Shiina-Narashi fault), and this contrast is consistent with approximately 1200 m of post-metamorphic vertical offset. Subduction prior to Middle Miocene probably involved the Kula or fused Kula-Pacific plate and the background geothermal gradient during the Eocene-Oligocene phase of accretion was ～ 30–35°C/km. Rapid heating of the Shimanto Belt evidently occurred immediately after a Middle Miocene reorganization of the subduction boundary. Hot oceanic lithosphere from the Shikoku Basin first entered the subduction zone at ～ 15 Ma; this event also coincided with the opening of the Sea of Japan and the rapid clockwise rotation of southwest Japan. The background geothermal gradient at that time was ～ 70°C/km. Whether or not all portions of the inherited (Eocene-Oligocene) palaeothermal structure were overprinted during the Middle Miocene remains controversial.     

Internally consistent gahnitic spinel-cordierite-garnet equilibria in the FMASHZn system: geothermobarometry and applications

The equilibrium (Mg, Fe, Zn)₃Al₂Si₃O₁₂+2Al₂SiO₅=3(Mg, Fe, Zn)Al₂O₄+5SiO₂ garnet + sillimanite/kyanitc = spinel + quartz was calibrated in the piston-cylinder apparatus between 11 and 30 kbar, and over the temperature range of 950 to 1200°C. Three experimental mixes of Mg no. [100^*MgO/(MgO+FeO)] 40, 47 and 60, in the FeO –MgO–Al₂O₃–SiO₂–ZnO (FMASZn) system were used under low oxygen fugacities and anhydrous conditions. We derive a ternary Fe–Mg–Zn symmetric mixing model for aluminous spinels in equilibrium with garnet, to quantify the increase in gahnitic end-member of spinel with increasing pressure and descreasing temperature. Further experiments in the spinel-cordieritequartz-sillimanite field were combined with garnet-cordierite data from the literature to produce a consistent set of equations describing the exchange reactions in FMASHZn relevant to quartz-sillimanite bearing rocks at granulite facies conditions. As spinel is an important mineral participating in many rocks of aluminous composition at granulite-facies conditions, and as zinc contributes to an enlargement of spinel's stability field towards higher pressures and lower temperatures, the thermobarometric calibrations presented here will be most significant in delineating the prograde and retrograde trajectory of P-T paths.