Stars with Discrepant <Emphasis Type="Italic">v</Emphasis> sin <Emphasis Type="Italic">i</Emphasis> as Derived from the Ca II 3933 and Mg II 4481 Å Lines. VII. HD9531 (SB), HD31592 (SB2), HD129174 (SB?)

In this paper of the series we analyze three stars listed among stars with discrepant v sin i: HD9531 and HD31592, which also show radial velocity variations inherent to spectroscopic binaries, and HD129174 which is an Mn-type star with a possible magnetic field. In HD9531 we confirm the radial velocity derived fromthe hydrogen lines as well as fromthe Ca II line at 3933 Å as variable. The profile of the calcium line also appears variable, and with the estimated magnetic induction B_e = ?630 ± 1340 G, this suggests that the abundance of calcium possibly varies over the surface of the star. We identified the lines of the secondary component in the spectrum of HD31592 revealing thus it is an SB2 binary with B9.5V and A0V components. While the primary star rotates with v sin i = 50 km s^?1, the secondary star is faster with v sin i = 170 km s^?1. We find that only 60% of the Mn lines identified in the spectrum of HD129174 can be fitted with a unique abundance value, whereas the remaining lines are stronger or fainter. We also identified two Xe II lines at 5339.33 Å and 5419.15 Å and estimated their log g f.     

Saturation of groundwaters with respect to minerals of the host rocks

Calculations of the saturation of groundwaters with respect to minerals of the rocks hosting these waters indicate that most of the analyzed groundwaters were saturates with respect to calcite, dolomite, and quartz. Brines of chloride-calcic composition were determined to be saturated with respect to calcite, whereas brines of chloride-sodic composition are saturated with respect to dolomite and quartz. The solution was simultaneously saturated with respect to six minerals for the association ankerite-calcite-dolomite-pyrite-quartz-strontianite. An increase in the number of minerals with respect to which solution is saturated is correlated with an increase in the diversity of types of groundwaters and an increase in the runoff rate. The paper proposes possible avenues for searches for relations between hydrogeological and geochemical parameters that make it possible to adapt the thermodynamic models to real geological-hydrogeological conditions. The research was centered on the testing of groundwaters for their saturation with respect to minerals of the rocks hosting these waters. This parameter plays a significant part in forming the geochemical type of natural waters because it reflects the crystallization of a mineral from a solution and, consequently, the removal of an element from the aqueous solution.     

Novae in M31 in 1999–2005

We present the results of our study of 19 novae in the galaxy M31 on photographs taken with wide-field telescopes in 1999–2005. Two of the six novae discovered in our program (ShA 65 and ShA 67) have been identified with supersoft X-ray sources, the discovery of one nova (ShA 69) was reported in IAU Circulars, and the other three novae (ShA 66, ShA 68, and ShA 70) are reported for the first time.     

Four thousand years of atmospheric lead pollution in northern Europe: a summary from Swedish lake sediments

This paper presents a large palaeolimnological study of the pre-industrial and industrial history of atmospheric lead pollution deposition in Sweden. Both lead concentrations and ²⁰⁶Pb/²⁰⁷Pb ratios have been analysed in 31 lakes covering most of Sweden, plus one lake in north-west Russia. Four of the lakes have varved (annually-laminated) sediments. Isotope analysis is a sensitive and effective method to distinguish pollution lead from natural catchment lead and to detect early pollution influence, because the ²⁰⁶Pb/²⁰⁷Pb ratio in unpolluted background sediments in Sweden was > 1.3, while that of lead from pollution, derived from ores and coal, was < 1.2. The sediments show a consistent picture of past temporal changes in atmospheric lead pollution. These changes include: the first traces of pollution 3,500-3,000 yrs ago; a pollution peak in Greek-Roman Times (about 0 AD); lower lead fall-out between 400 and 900 AD; a significant and permanent increase in atmospheric lead fall-out from about 1000 AD; an increase with the Industrial revolution; a major increase following World War II; the maximum peak in the 1970s; and decreasing fall-out over the last decades. The four varved sediments provide high-resolution records of atmospheric pollution. They reveal pollution peaks about 1200 and 1530 AD which match the history of metal production in Europe. According to the varve records the lead pollution level in the late 1990s had decreased beneath the level of the 1530s. The pollution level 1200 AD was about 35% of the 1980s, when lead pollution was still near its all time high. About 50% of the total accumulated atmospheric lead pollution deposition through time was deposited in the pre-industrial period. The sediments also show a consistent picture of the geographic distribution of atmospheric lead deposition over time, with higher deposition in south Sweden and declining levels to the north, which supports the hypothesis that the main sources of pre-industrial atmospheric lead pollution in Sweden were cultural areas in mainland Europe and Great Britain.     

The MPE X-ray test facility PANTER: Calibration of hard X-ray (15–50 kev) optics

The Max-Planck-Institut für extraterrestrische Physik (MPE) in Garching, Germany, uses its large X-ray beam line facility PANTER for testing X-ray astronomical instrumentation. A number of telescopes, gratings, filters, and detectors, e.g. for astronomical satellite missions like Exosat, ROSAT, Chandra (LETG), BeppoSAX, SOHO (CDS), XMM-Newton, ABRIXAS, Swift (XRT), have been successfully calibrated in the soft X-ray energy range (< 15keV). Moreover, measurements with mirror test samples for new missions like ROSITA and XEUS have been carried out at PANTER. Here we report on an extension of the energy range, enabling calibrations of hard X-ray optics over the energy range 15–50 keV. Several future X-ray astronomy missions (e.g., Simbol-X, Constellation-X, XEUS) have been proposed, which make use of hard X-ray optics based on multilayer coatings. Such optics are currently being developed by the Osservatorio Astronomico di Brera (OAB), Milano, Italy, and the Harvard-Smithsonian Center for Astrophysics (CfA), Cambridge, MA, USA. These optics have been tested at the PANTER facility with a broad energy band beam (up to 50 keV) using the XMM-Newton EPIC-pn flight spare CCD camera with its good intrinsic energy resolution, and also with monochromatic X-rays between C-K (0.277 keV) and Cu-Kα (8.04 keV). PACS: 95.55.Ka, 95.55.Aq, 41 50.+h, 07.85.Fv     

Gold–quartz deposits of the Zhdaninsky ore–placer cluster,eastern Yakutia: Structural control and formation conditions

Gold deposits and occurrences small in reserves and high in Au grade conventionally determine the line of prospecting in terrigenous sequences of the Verkhoyansk–Kolyma region. In this paper, the geological structure of such gold objects is considered with the example of the deposits and prospects making up the Zhdaninsky ore–placer cluster in the Republic of Sakha (Yakuia). From lithological, structural, and mineralogical–geochemical data, the formation conditions of ore-bearing complexes are specified, the geological evolution history of the northern Ol’chan Zone of the Kular–Nera Belt is reconstructed, and the zonal distribution of mineralization within the ore–placer cluster is revealed. The structural–compositional complexes were formed in the following succession: (1) sedimentation at the shelf of the passive margin accompanied by synsedimentation deformations; (2) metagenesis of sediments and the development of bedding-plane intraformational detachments of collision stage D₁ under conditions of tangential compression and accompanied by the formation of carbon dioxide–aqueous metamorphic fluid at a temperature of 300°C and under a pressure of 1.4 kbar; (3) folding and faulting of orogenic stage D₂ with the formation of synkinematic magmatic bodies, metasomatic alteration, and Au-bearig mineral assemblages. Small Au-bearing objects with veined mineralization and high Au grade are localized in structures of stage D₂ transverse to bedding-plane schistosity S₁. They form at the collision stage above intraformational detachment surfaces and are controlled by shear structures of the orogenic stage with misalignment of these deformations. The ore zoning is determined by the distribution of Co and Ni minerals and by variations in the anionic composition of ore (S, As, Sb).     

Evolution on the AGB and beyond: on the formation of H-deficient post-AGB stars

The evolution on the AGB and beyond is reviewed with respect to the origin of Wolf-Rayet central stars. We focus on thermal pulses due to their particular importance for the evolution of hydrogen deficient stars. It is shown that overshoot applied to all convection regions is a key ingredient to model these objects leading to intershell abundances already close to the surface abundances of Wolf-Rayetcentral stars. In contrast to standard evolutionary calculations, overshoot models do show dredge up for very low envelope masses and efficient dredge up was found even during the post-AGB stage. Three thermal pulse scenarios for Wolf-Rayet central stars can nowbe distinguished: an AGB Final Thermal Pulse (AFTP) occurring at the very end of the AGB evolution, a Late Thermal Pulse (LTP) occurring during the post-AGBevolution when hydrogen burning is still on, and a Very Late Thermal Pulse (VLTP) occurring on the cooling branch when hydrogen burning has already ceased. All scenarios lead to hydrogen-deficient post-AGB stars with carbon and oxygen abundances as observed for Wolf-Rayet stars.Hydrogen is either diluted by dredge up (AFTP, LTP) or completely burnt (VLTP).     

Production of organic molecules in the outer solar system by proton irradiation: Laboratory simulations

In the past few years considerable attention has been given to the determination of likely compounds that could account for the various colors observed in the outer solar system: and to possible formation mechanisms for these compounds. Many experiments have been done using electrical discharges (Chadha, M. S., et al., 1971, Icarus15, 39) and ultraviolet light (Khare, B. N., and Sagan, C., 1973, Icarus20, 311) on mixtures of CH₄, NH₃, and H₂S, which are most likely the dominant minor constituents of the atmospheres of Jupiter, Saturn, Titan, and possibly the other satellites early in their histories. Colored polymers, usually brownish-red, have been produced in these experiments. With the passage of Pioneer 10 around Jupiter, there is another source of energy worthy of consideration, energetic protons (and electrons). Preliminary experiments to investigate the formation of colored polymers and other interesting molecules by the irradiation of gas mixtures by protons are discussed. Two to four Mev protons were used, with corresponding beam fluxes (as measured at 6R_J from the planet) equivalent to approximately 80 Earth years at Jupiter per hour of exposure. As in the other types of experiments, colored polymers have been produced. An important feature of this work is the presence or absence of absorption at 5 μm in the different materials produced; Titan is quite dark at this wavelength and Io is fairly bright. Such features may provide criteria for accepting or rejecting various materials produced in these experiments as reasonable coloring agents for the outer solar system.     

Eagle Nebula Pillars: From Models to Observations

Over the past few years, our group has been developing hydrodynamic models to simulate formation of the Eagle Nebula pillars. The true test of any model is, of course, how well it can reproduce the observations. Here, we discuss how we go about testing our models against observations. We describe the process by which we “observe” the model data to create synthetic maps. We show an example of this technique using one of our model runs and compare the resultant synthetic map to the real one.