Incentives for field hydrology and data sharing: collaboration and compensation: reply to “A need for incentivizing field hydrology,especially in an era of open data”*

We thank Allen and Berghuijs for continuing the discussion on field hydrology and data sharing and discuss two incentives to promote data collection and sharing in hydrological sciences: a collaborative attitude and additional funding to make data publicly available.     

Removal of selenium from contaminated agricultural drainage water by nanofiltration membranes

Seleniferous agricultural drainage wastewater has become a new major source of pollution in the world. In the USA, large areas of farmland in 17 western states, generate contaminated salinized drainage with Se concentrations much higher than 5 μg/I, the US Environmental Protection Agency water-quality criterion for the protection of aquatic life; Se values locally reach 4200 wg/1 in western San Joaquin Valley, California. Wetland habitats receiving this drainage have generally shown Se toxicosis in aquatic birds causing high rates of embryonic deformity and mortality, or have indicated potential ecological damage.Results of our laboratory flow experiments indicate that nanofiltration, the latest membrane separation technology, can selectively remove > 95% of Se and other multivalent anions from > 90% of highly contaminated water from the San Joaquin Valley, California. Such membranes yield greater water output and require lower pressures and less pretreatment, and therefore, are more cost effective than traditional reverse osmosis membranes. Nanofiltration membranes offer a potential breakthrough for the management of Se contaminated wastes not only from agricultural drainage, but from other sources also.     

Evaluation of Zerovalent Zinc for Treatment of 1,2,3‐Trichloropropane‐Contaminated Groundwater: Laboratory and Field Assessment

The efficacy and feasibility of using zerovalent zinc (ZVZ) to treat 1,2,3‐trichloropropane (TCP)‐contaminated groundwater was assessed in laboratory and field experiments. In the first portion of the study, the reactivity of commercially available granular ZVZ toward TCP was measured in bench‐scale batch‐reactor and column experiments. These results were used to design columns for on‐site pilot‐scale treatment of contaminated groundwater at a site in Southern California. Two of the ZVZ materials tested were found to produce relatively high rates of TCP degradation as well as predictable behavior when scaling from bench‐scale to field testing. In addition, there was little decrease in the rates of TCP degradation over the duration of field testing. Finally, no secondary impacts to water quality were identified. The results suggest that ZVZ may be an effective and feasible material for use in engineered treatment systems, perhaps including permeable reactive barriers.     

Reconstructing disease transmission dynamics from animal movements and test data

Disease outbreaks are often accompanied by a wealth of data, usually in the form of movements, locations and tests. This data is a valuable resource in which data scientists and epidemiologists can reconstruct the transmission pathways and parameters and thus devise control strategies. However, the spatiotemporal data gathered can be both vast whilst at the same time incomplete or contain errors frustrating the effort to accurately model the transmission processes. Fortunately, several techniques exist that can be used to infer the relevant information to help explain these processes. The aim of this article is to provide the reader with a user friendly introduction to the techniques used in dealing with the large datasets that exists in epidemiological and ecological science and the common pitfalls that are to be avoided as well as an introduction to inference techniques for estimating parameter values for mathematical models from spatiotemporal datasets.     

Opening a new window to other worlds with spectropolarimetry

A high level of diversity has already been observed among the planets of our own Solar System. As such, one expects extrasolar planets to present a wide range of distinctive features, therefore the characterisation of Earth- and super Earth-like planets is becoming of key importance in scientific research. The Search (Spectropolarimetric Exoplanet AtmospheRe CHaracerisation) mission proposal of this paper represents one possible approach to realising these objectives. The mission goals of Search include the detailed characterisation of a wide variety of exoplanets, ranging from terrestrial planets to gas giants. More specifically, Search will determine atmospheric properties such as cloud coverage, surface pressure and atmospheric composition, and may also be capable of identifying basic surface features. To resolve a planet with a semi major axis of down to 1.4 AU and 30 pc distant Search will have a mirror system consisting of two segments, with elliptical rim, cut out of a parabolic mirror. This will yield an effective diameter of 9 m along one axis. A phase mask coronagraph along with an integral spectrograph will be used to overcome the contrast ratio of star to planet light. Such a mission would provide invaluable data on the diversity present in extrasolar planetary systems and much more could be learned from the similarities and differences compared to our own Solar System. This would allow our theories of planetary formation, atmospheric accretion and evolution to be tested, and our understanding of regions such as the outer limit of the Habitable Zone to be further improved.     

Geochemical evidence for Se mobilization by the weathering of pyritic shale, San Joaquin Valley, California, U.S.A.

Acidic (pH 4) seeps issue from the weathered Upper Cretaceous-Paleocene marine sedimentary shales of the Moreno Formation in the semi-arid Coast Ranges of California. The chemistry of the acidic solutions is believed to be evidence of current reactions ultimately yielding hydrous sodium and magnesium sulfate salts, e.g. mirabilite and bloedite, from the oxidation of primary pyrite. The selenate form of Se is concentrated in these soluble salts, which act as temporary geological sinks. Theoretically, the open lattice structures of these hydrous minerals could incorporate the selenate (SeO₄⁻²) anion in the sulfate (SO₄⁻²) space. When coupled with a semi-arid to arid climate, fractional crystallization and evaporative concentration can occur creating a sodium-sulfate fluid that exceeds the U.S. Environmental Protection Agency limit of 1000 μg l⁻¹ for a toxic Se waste. The oxidative alkaline conditions necessary to ensure the concentration of soluble selenate are provided in the accompanying marine sandstones of the Panoche and Lodo Formations and the eugeosynclinal Franciscan assemblage. Runoff and extensive mass wasting in the area reflect these processes and provide the mechanisms which transport Se to the farmlands of the west-central San Joaquin Valley. Subsurface drainage from these soils consequently transports Se to refuge areas in amounts elevated to cause a threat to wildlife.     

The political topology of urban uprisings

This article examines the relationship between political uprising and megaproject-based global city reform in Paris and London. On the one hand, it considers the banlieue uprisings in Paris in November 2005 as an impetus for the Grand Paris renewal initiative launched in April 2007. This is compared with the large-scale reformations of space across London in advance of the 2012 Olympics as a contributing factor in the riots of August 2011. In both of these cases there is an integral though indirect link between urban planning and resistance. Engaging with Marxist political theory and critical urban geography, I argue that uprisings and global city developments relate in a mutually constitutive fashion. I also locate the suburbs, broadly defined, as an important site of contemporary political antagonism. I use the concept of “political topology” to suggest that global city pursuits present a new mode of uneven development that has not yet been adequately met in thought or practice. The two cases are thus used to open up to a more general analysis of twenty-first-century urban politics.     

Modelling future lahars controlled by different volcanic eruption scenarios at Cotopaxi (Ecuador) calibrated with the massively destructive 1877 lahar

Lahars are among the most hazardous mass flow processes on earth and have caused up to 23 000 casualties in single events in the recent past. The Cotopaxi volcano, 60 km southeast of Quito, has a well-documented history of massively destructive lahars and is a hotspot for future lahars due to (i) its ~10 km² glacier cap, (ii) its 117–147-year return period of (Sub)-Plinian eruptions, and (iii) the densely populated potential inundation zones (300 000 inhabitants). Previous mechanical lahar models often do not (i) capture the steep initial lahar trajectory, (ii) reproduce multiple flow paths including bifurcation and confluence, and (iii) generate appropriate key parameters like flow speed and pressure at the base as a measure of erosion capacity. Here, we back-calculate the well-documented 1877 lahar using the RAMMS debris flow model with an implemented entrainment algorithm, covering the entire lahar path from the volcano edifice to an extent of ~70 km from the source. To evaluate the sensitivity and to constrain the model input range, we systematically explore input parameter values, especially the Voellmy–Salm friction coefficients μ and ξ. Objective selection of the most likely parameter combinations enables a realistic and robust lahar hazard representation. Detailed historic records for flow height, flow velocity, peak discharge, travel time and inundation limits match best with a very low Coulomb-type friction μ (0.0025–0.005) and a high turbulent friction ξ (1000–1400 m/s²). Finally, we apply the calibrated model to future eruption scenarios (Volcanic Explosivity Index = 2–3, 3–4, >4) at Cotopaxi and accordingly scaled lahars. For the first time, we anticipate a potential volume growth of 50–400% due to lahar erosivity on steep volcano flanks. Here we develop a generic Voellmy–Salm approach across different scales of high-magnitude lahars and show how it can be used to anticipate future syneruptive lahars.     

Confirming regional 1 cm differential geoid accuracy from airborne gravimetry: the Geoid Slope Validation Survey of 2011

A terrestrial survey, called the Geoid Slope Validation Survey of 2011 (GSVS11), encompassing leveling, GPS, astrogeodetic deflections of the vertical (DOV) and surface gravity was performed in the United States. The general purpose of that survey was to evaluate the current accuracy of gravimetric geoid models, and also to determine the impact of introducing new airborne gravity data from the ‘Gravity for the Redefinition of the American Vertical Datum’ (GRAV-D) project. More specifically, the GSVS11 survey was performed to determine whether or not the GRAV-D airborne gravimetry, flown at 11 km altitude, can reduce differential geoid error to below 1 cm in a low, flat gravimetrically uncomplicated region. GSVS11 comprises a 325 km traverse from Austin to Rockport in Southern Texas, and includes 218 GPS stations ( $\sigma _{\Delta h }= 0.4$ cm over any distance from 0.4 to 325 km) co-located with first-order spirit leveled orthometric heights ( $\sigma _{\Delta H }= 1.3$ cm end-to-end), including new surface gravimetry, and 216 astronomically determined vertical deflections $(\sigma _{\mathrm{DOV}}= 0.1^{\prime \prime })$ . The terrestrial survey data were compared in various ways to specific geoid models, including analysis of RMS residuals between all pairs of points on the line, direct comparison of DOVs to geoid slopes, and a harmonic analysis of the differences between the terrestrial data and various geoid models. These comparisons of the terrestrial survey data with specific geoid models showed conclusively that, in this type of region (low, flat) the geoid models computed using existing terrestrial gravity, combined with digital elevation models (DEMs) and GRACE and GOCE data, differential geoid accuracy of 1 to 3 cm (1 $\sigma )$ over distances from 0.4 to 325 km were currently being achieved. However, the addition of a contemporaneous airborne gravity data set, flown at 11 km altitude, brought the estimated differential geoid accuracy down to 1 cm over nearly all distances from 0.4 to 325 km.     

Stratigraphic architecture of a tide‐influenced shelf‐edge delta,Upper Cretaceous Dorotea Formation,Magallanes‐Austral Basin,Patagonia

The Magallanes‐Austral Basin of Patagonian Chile and Argentina is a retroforeland basin associated with Late Cretaceous–Neogene uplift of the southern Andes. The Upper Cretaceous Dorotea Formation records the final phase of deposition in the Late Cretaceous foredeep, marked by southward progradation of a shelf‐edge delta and slope. In the Ultima Esperanza district of Chile, laterally extensive, depositional dip‐oriented exposures of the Dorotea Formation contain upper slope, delta‐front and delta plain facies. Marginal and shallow marine deposits include abundant indicators of tidal activity including inclined heterolithic stratification, heterolithic to sandy tidal bundles, bidirectional palaeocurrent indicators, flaser/wavy/lenticular bedding, heterolithic tidal flat deposits and a relatively low‐diversity Skolithos ichnofacies assemblage in delta plain facies. This work documents the stratigraphic architecture and evolution of the shelf‐edge delta that was significantly influenced by strong tidal activity. Sediment was delivered to a large slump scar on the shelf‐edge by a basin‐axial fluvial system, where it was significantly reworked and redistributed by tides. A network of tidally modified mouth bars and tidal channels comprised the outermost reaches of the delta complex, which constituted the staging area and initiation point for gravity flows that dominated the slope and deeper basin. The extent of tidal influence on the Dorotea delta also has important implications for Magallanes‐Austral Basin palaeogeography. Prior studies establish axial foreland palaeodrainage, long‐term southward palaeotransport directions and large‐scale topographic confinement within the foredeep throughout Late Cretaceous time. Abundant tidal features in Dorotea Formation strata further suggest that the Magallanes‐Austral Basin was significantly embayed. This ‘Magallanes embayment’ was formed by an impinging fold–thrust belt to the west and a broad forebulge region to the east.