Image analysis applied to quantitative evaluation of chromatic impact generated by open-pit quarries and mines

One of the most important environmental impacts resulting from opencast mining, and especially quarries, is the visual impact. Evaluation of this impact considers two aspects: first, the area occupied by the quarry as seen by an observer from a specific place, and, second, the chromatic contrast existing between landscape and exploitation. In this study we develop a methodology to assess the chromatic impact in an objective and comparable form. To assess this impact we developed a method based on image analysis that allows us to obtain from a picture or image its equivalent as a function of chromatic impact, according to the sensibility of the human eye to different wavelengths. The methodology was applied to the Martinenca limestone quarry (Alcanar, Tarragona) and to Cerro Kori Kollo mine, La Joya district (Bolivia).     

Capture-zone design in an aquifer influenced by cyclic fluctuations in hydraulic gradients

Design of a groundwater pumping and treatment system for a wood-treatment facility adjacent to the tidally influenced Fraser River estuary required the development of methodologies to account for cyclic variations in hydraulic gradients. Design of such systems must consider the effects of these cyclic fluctuations on the capture of dissolved-phase contaminants. When the period of the cyclic fluctuation is much less than the travel time of the dissolved contaminant from the source to the discharge point, the hydraulic-gradient variations resulting from these cycles can be ignored. Capture zones are then designed based on the average hydraulic gradient determined using filter techniques on continuous groundwater-level measurements. When the period of cyclic fluctuation in hydraulic gradient is near to or greater than the contaminant travel time, the resulting hydraulic-gradient variations cannot be ignored. In these instances, procedures are developed to account for these fluctuations in the capture-zone design. These include proper characterization of the groundwater regime, assessment of the average travel time and period of the cyclic fluctuations, and numerical techniques which allow accounting for the cyclic fluctuations in the design of the capture zone. Electronic Publication     

A powder diffraction quantification method (ALJOR) for atmospheric particulate matter

The percentage calculation of crystalline phases in atmospheric particulate matter samples by means of an adiabatic approach of the matrix-flushing method with preferred preparations that avoids preferential orientations, should never be interpreted as absolute values. On the contrary, it should be seen as an indicator of the significant differences between each and every analyzed sample. Factors such as the application of constants, which are only useful for preparations of polycrystalline samples free of preferential orientation, and/or like the deficient resolution shown by the diffraction diagrams for certain phyllosilicate phases, bring a high degree of uncertainty to these percentage calculations. An alternative method of crystalline and amorphous phase quantification is presented below. Once the majority phases in the samples were identified, appropriate pure phases corresponding to each of them were selected. Then, the corresponding calibration curves were built using corundum (number 676 NIST) as a reference pattern phase. After validating the obtained calibration curves, the constants corresponding to each phase and selected spacing were calculated. The ALJOR method has been used for the quantification of five samples.     

U–Pb evidence for a polyorogenic evolution of the HP–HT units of the NW Iberian Massif

. A isotope dilution thermal ionisation mass spectrometry U-Pb geochronological study was carried out on the high-pressure and high-temperature units (HP-HT units) overlying the oceanic suture in the Allochthonous Complexes of the NW Iberian Variscan Belt. The rocks investigated are seven granulite- to eclogite-facies paragneisses and one leucosome within mafic high-pressure granulites in the Ordenes and Cabo Ortegal Complexes of NW Spain. U-Pb dating of zircon, monazite, titanite and rutile reveal the presence of a pervasive Early Ordovician metamorphic event at ca. 500-480 Ma and a later Early Devonian event at ca. 400-380 Ma. The U-Pb ages, in conjunction with petrological and structural data, indicate that the high-pressure event recorded by these rocks is Early Ordovician in age. Monazite ages in the paragneisses suggest that peak metamorphic conditions were reached at ca. 500-485 Ma. Subsequently, the rock ensemble underwent exhumation accompanied by partial melting and zircon growth at ca. 485-470 Ma. Melting of mafic granulites was coeval with this latter episode as indicated by zircon crystallisation age in the leucosomes dated at ca. 486 Ma. Based on these data and on the general features of magmatism and metamorphic evolution, it is proposed that this process took place at a convergent plate boundary within a peri-Gondwanan oceanic domain. Monazite, titanite and rutile data in some of the samples studied show evidence of a second metamorphic episode that took place between ca. 400 and 380 Ma (with a peak at ca. 390-385 Ma). This Early Devonian event, at variance with the previous one, was not pervasive, but, rather, was localised in areas of intense Variscan tectonothermal reworking. It is claimed that this later metamorphic event was recorded by the U-Pb system in areas where monazite and titanite growth was enhanced by fluid circulation in highly strained rocks (Variscan shear zones). According to previous structural studies and Ar-Ar dating of fabrics, this Early Devonian episode took place as the HP-HT units were deformed and thrusted upon the ophiolitic units in the early stages of the Variscan collision.     

Reduction of surface subsidence risk by fly ash exploitation as filling material in deep mining areas

The possibility of filling empty underground spaces, which exist owing to the extraction of mineral raw materials, with fly ash and cement fly ash mixes has been studied for the purpose of reducing the impact of deep mining on the surface. The method of physical modelling was used to study the behaviour of fly ash mixes deposited in extracted mine spaces. The models were constructed for two different geometries of underground extracted mine spaces: into cavities of the type of large slits created in the course of mining in steeply lode deposits without subsequently filling the empty space and in vertical shafts of rectangular or circular cross-section with horizontal side headings that have partly caved in due to mine shocks or other seismic events.     

Modelling shallow landslide susceptibility: a new approach in logistic regression by using favourability assessment

A new method for estimating shallow landslide susceptibility by combining Geographical Information System (GIS), nonparametric kernel density estimation and logistic regression is described. Specifically, a logistic regression is applied to predict the spatial distribution by estimating the probability of occurrence of a landslide in a 16 km² area. For this purpose, a GIS is employed to gather the relevant sample information connected with the landslides. The advantages of pre-processing the explanatory variables by nonparametric density estimation (for continuous variables) and a reclassification (for categorical/discrete ones) are discussed. The pre-processing leads to new explanatory variables, namely, some functions which measure the favourability of occurrence of a landslide. The resulting model correctly classifies 98.55% of the inventaried landslides and 89.80% of the landscape surface without instabilities. New data about recent shallow landslides were collected in order to validate the model, and 92.20% of them are also correctly classified. The results support the methodology and the extrapolation of the model to the whole study area (278 km²) in order to obtain susceptibility maps.     

Thermal expansion and high-temperature P21/c–C2/c phase transition in clinopyroxene-type LiFeGe2O6 and comparison to NaFe(Si,Ge)2O6

A synthetic clinopyroxene with composition LiFe³⁺Ge₂O₆, monoclinic s.g. P2₁/c, a = 9.8792(7), b = 8.8095(5), c = 5.3754(3) Å, β = 108.844(6)°, V = 442.75(16) ų, has been studied by in situ low- and high-temperature single-crystal X-ray diffraction. The variation of lattice parameters and the intensity of the b-type reflections (h + k = 2n + 1, only present in the P-symmetry) with increasing temperature showed a displacive phase transition from space group P2₁/c to C2/c at a transition temperature T _tr = 789 K, first order in character, with a sudden volume increase of 1.6% and a decrease of β by 1° at the transition. This spontaneous dilatation is reversible, shows a limited hysteresis of ±10°C, and corresponds to the vanishing of the b-type reflections, thus indicating a symmetry increase to space group C2/c. Below T _tr an expansion is observed for all the cell parameters, while the β angle remained almost constant; at T > T _tr the thermal volume expansion is due to dilatation of the structure in the $(\bar{1}\,0\,1) A synthetic clinopyroxene with composition LiFe³⁺Ge₂O₆, monoclinic s.g. P2₁/c, a = 9.8792(7), b = 8.8095(5), c = 5.3754(3) ?, β = 108.844(6)°, V = 442.75(16) ?³, has been studied by in situ low- and high-temperature single-crystal X-ray diffraction. The variation of lattice parameters and the intensity of the b-type reflections (h + k = 2n + 1, only present in the P-symmetry) with increasing temperature showed a displacive phase transition from space group P2₁/c to C2/c at a transition temperature T _tr = 789 K, first order in character, with a sudden volume increase of 1.6% and a decrease of β by 1° at the transition. This spontaneous dilatation is reversible, shows a limited hysteresis of ±10°C, and corresponds to the vanishing of the b-type reflections, thus indicating a symmetry increase to space group C2/c. Below T _tr an expansion is observed for all the cell parameters, while the β angle remained almost constant; at T > T _tr the thermal volume expansion is due to dilatation of the structure in the ([`1] 0 1)(\bar{1}\,0\,1) plane, mostly along [0 1 0], and pure shear in the (0 1 0) plane due to the decrease of β. From comparison with silicate analogues, the germanate clinopyroxenes are more expansible, while the P2₁/c expands more than the C2/c phase. The evolution of Q ² (calculated as the normalized intensity of b-type reflections) with T in the framework of the Landau theory has been done using a standard expression for a first order phase transition. We observe a jump of Q ₀² = 0.538(2) at T _tr, with T _c of 481(7) K, b/a = −2,290 K, and c/a = 3,192 K, and thus far from being tri-critical point. A closely related composition (LiFe³⁺Si₂O₆) shows an equivalent phase transition at 228 K, which is very close to the tri-critical point and 561 K cooler. This result indicates that a change in the composition of tetrahedral sites can have dramatic effects on the P2₁/c ↔ C2/c displacive phase transition in clinopyroxenes. The major changes observed in the evolution of the crystal structure with T are observed in the M2 polyhedron, with a volume decrease by ca. 13.3%, compared to ca. 1.3% observed in the M1 polyhedron. The tetrahedra behave as rigid units with neither a significant change of volume at T > T _tr (<1‰), nor a change of tilting of the basal plane. No change in coordination is observed at T > T _tr in the M2 polyhedron, which remains sixfold coordinated although a strong deformation of this polyhedron is observed. This deformation is related to a strong change by 51.4° at T _tr of the kinking angle (O3–O3–O3 angle) of the B-chain of tetrahedra, which switches from O-rotated to S-rotated [from 143.3(5)° to 194.7(6)°]. The A-chain is S-rotated at T < T _tr [206.8(5)° at 703 K] and extends by 12° at the transition.     

Web-oriented GIS system for monitoring, conservation and law enforcement of the Brazilian Amazon

A web GIS (WGIS) system for the Brazilian Amazon, named ImazonGeo and based on open source and public domain data, is presented. ImazonGeo was built following three principles. First, the system is based on Spatial Data Infrastructure architecture and web interface built using free software and public domain data. Second, we went beyond visualization of maps and spatial queries by providing information obtained with spatial analysis models. To do that, we designed a database that stores the results of previously defined spatial analyses and developed customized reports and query tools to facilitate fast access of information by end-users. Finally, the system is application-oriented in the areas of forest monitoring, conservation and forest law enforcement, meaning that it aims to contribute to support the protection of Brazilian Amazon forests. We illustrate these principles by presenting ImazonGeo’s technology, architecture, content and tools. Moreover, we present two successful cases to demonstrate how the system is being used. We conclude the paper discussing the challenges and potential solutions to turning our WGIS-SDI system into an internet hub of geo-information about the Brazilian Amazon.     

Life in the sublittoral zone of long-lived Lake Pannon: paleontological analysis of the Upper Miocene Szák Formation,Hungary

Life and depositional environments in the sublittoral zone of Lake Pannon, a large, brackish Paratethyan lake from the Late Miocene, were reconstructed from fossils and facies of the Szák Formation. This formation is exposed in several, roughly coeval (9.4–8.9 Ma) outcrops, located along strike of the paleo-shelf-break in northwestern Hungary. The silty argillaceous marl of the formation was deposited below storm wave base, at 20–30 to 80–90 m water depth. The abundance of benthic organisms indicates that the bottom water was usually well oxygenated. Interstitial dysoxia, however, may have occurred immediately below the sediment–water interface, as evidenced by occasional preservation of trace fossils such as Diplocraterion. The fauna comprised endemic mollusks, including brackish cockles of the subfamily Lymnocardiinae, dreissenid mussels (Congeria), and highly adapted, uniquely large-sized deep-water pulmonate snails (planorbids and lymnaeids). Ostracods were dominated by endemic species and, in some cases, endemic genera of candonids, leptocytherids, cypridids, and loxoconchids. Fish remnants include a sciaenid otolith and the oldest skeletal occurrence of Perca in Europe. The phytoplankton comprised exclusively endemic coccolithophorids, mostly endemic dinoflagellates (prevailingly Spiniferites), and cosmopolitan green algae. The Late Miocene fauna and flora of Lake Pannon were in many ways similar to the modern Caspian biota, and in particular cases can be regarded as its precursor.     

On the breakdown of zircon upon “dry” thermal annealing

Zircon samples without and with secondary chemical alteration from diverse sources were subjected to heat treatment at 1400 °C for 96 h. Resulting new phases and textures suggest that decomposition of zircon into component oxides occurred in all experiments to various degrees. The crucible material was found to have a strong influence on the extent of breakdown, especially in the case of altered starting materials. In this study the progressive stages of the breakdown of zircon grains are described. The factors that may govern the decomposition are discussed, including radiation damage, secondary alteration and external reaction conditions (sample container, atmosphere). Alumina crucibles should generally be avoided in dry annealing of zircon, to minimise uncontrolled breakdown into oxides.