Rock mass rating and Kinematic analysis for slope stability investigation of Utari dam,Lalitpur district,Uttar Pradesh

Rock mass characterization of Utari dam in Lalitpur district of Uttar Pradesh was done to identify different stability classes of rock mass. For better stability of Utari dam, foundation conditions were carefully studied by detailed field investigations of the site supplemented by laboratory tests. During feasibility and preliminary stages, rock mass characterization of slopes was conducted to identify the vulnerable zones of failure. Rock mass characterization was done by compilation of information obtained from intact rock as well as from rock mass to determine its grade and long term slope stability of the site. On the basis of Rock Mass Rating (RMR) and Geological Strength Index (GSI) slope stability is identified which lies under good quality rock mass. Kinematic analysis was conducted to find out the probability for different types of structurally controlled slope failure. Microscopic analyses were conducted to identify the degree of chemical alteration of feldspar. Clay formation by sericitization along joint planes is harmful for the stability of dam structure. Remedial measures must be taken to reduce the extent of chemical alteration. Granitoids at dam site forms a compact and stable foundation consisting of four sets of joints in which two sets were prominent which are dipping on the upstream side of the dam which reveals good condition on the dam site as leakage from reservoir will be minimum and least up-thrust on the dam structure.     

SMR geomechanics and kinematic analysis near Rasulpur,Fatehpur Sikri,Uttar Pradesh

Slope stability of mine slopes is often associated with safety and economics during excavation. Sandstone is excavated from Rasulpur area of Fatehpur Sikri in Uttar Pradesh for the purpose of crushed, decorative and dimension stones. In the present paper an attempt has been made to characterize the rock slope faces into different stability classes. Characterization is based on geological and geotechnical parameters recorded on the outcrop during field investigation and supplemented by geomechanical properties by the laboratory test for strength of the rock intact. SMR Geomechanics classification is used to identify the stability class and remedial measures are also suggested to reduce any possible hazard. Kinematic analysis of slope was also investigated to determine the probability of any possible structurally controlled failure. On the basis of SMR Geomechanics calculations slope under investigation lies under good stability class i.e. 2a and 2b. Installation of nets during excavation can be done and for better safety spot and systematic rock bolting can be done. Kinematic study reveals that toppling failures may occur, special care must be given to the joint set which can trigger toppling failure.     

Litter pollution on the Jordanian shores of the Gulf of Aqaba (Red Sea)

Litter was assessed on three beaches along the Jordanian coast of the Gulf of Aqaba, south of the town Aqaba, monthly during 1994 and 1995, in order to determine its nature, extent and possible sources. The overall mean was about 5 and 3 items/m(2) in 1994 and 1995, respectively. Approximately a total of 14,000 m(2) were examined and a total of 101,000 items were noted, 67,000 during 1994 and 34,000 in 1995. More than 50% of the litter was plastic and the remainder wood, glass, cardboard, Styrofoam, metal and other materials. Most litter appears to be from local land-based or near shore sources, although there are some regional influences as well. The main local sources are the passenger port, the cargo port and the beach goers. The findings are compared with other regions of the world. The amount of litter is related to distance of the beach from the main sources, and shape, physiography and orientation of the beach. Spatial and seasonal variations are examined and discussed, and actions and measures to combat the problem on local and regional levels are suggested.     

基于静稳天气下气球探空实验的中国沙漠地区沙尘气溶胶的垂直分布（英文）

塔克拉玛干沙漠是亚洲沙尘气溶胶的重要源地。为探讨塔克拉玛干地区沙尘气溶胶的理化特性与时空变化,研究其环境与气候效应,本文分析了四个季节在中国敦煌(塔克拉玛干沙漠内)取得的探空气球观测数据,包括气溶胶的数浓度、粒径分布、质量浓度及在西风主导下的水平输送通量。气溶胶数浓度的垂直廓线显示,来自沙漠地区的矿物粒子对局地环境与气候有重要影响,且所有季节都存在长距离输送。粒子谱分布显示局地有大量粗粒子输入。结果说明,源于塔克拉玛干沙漠的沙尘气溶胶的背景输送有着重要的科学意义,需进一步研究其对东亚和西太平洋地区环境与气候的影响。     

Amelioration of soil acidity,Olsen-P,and phosphatase activity by manure- and peat-derived biochars in different acidic soils

To increase soil productivity, ameliorate nutrient scarcity, and reduce metal toxicity in highly weathered acidic soils usually requires fertilizer and lime application. Effects of three biochars on soil acidity, Olsen-phosphorus (P), phosphatase activities, and heavy metal availability were investigated to test potential of these biochars as soil amendments in highly weathered acidic soils. Incubation experiments were conducted for 6 weeks with three acidic soils: Alfisol, Ultisol, and Oxisol. Three biochars were derived from chicken manure (CMB), pig manure (PMB), and peat moss (PB) at 400 °C and applied at 1 or 2% (wt/wt). The addition of the three biochars increased Olsen-P in the three acidic soils in the following order: CMB?>?PMB?>?PB. Application of 2% CMB increased Olsen-P contents by 2.41-, 7.4-, and 1.78-fold in the Ultisol, Oxisol, and Alfisol compared with controls, respectively. Moreover, CMB increased the soil pH, electrical conductivity (EC), cation exchange capacity (CEC), and alkaline phosphatase activity, but reduced exchangeable acidity, acid phosphatase activity, and the availability of heavy metals—more effectively than PMB and PB. Addition of CMB increased soil pH by 0.90, 0.90, and 0.92 units for the Alfisol, Ultisol, and Oxisol, respectively, correspondingly followed by 0.80, 0.84, and 0.87 units for PMB and 0.15, 0.28, and 0.25 for PM. Changes in EC, CEC, and exchangeable acidity followed the same order for the three soils: CMB?>?PMB?>?PB. The results suggested that the magnitude of changes in soil properties and Olsen-P contents depended on biochar type and application rate. Application of CMB increased nutrient availability and reduced the availability of heavy metals more than other amendments. Due to higher pH, EC, and CEC, and greater concentrations of carbon, nitrogen, and exchangeable calcium and potassium, incorporation of CMB should be a better cost-effective method to correct soil acidity and improve fertility and Olsen-P contents in Ultisols and Oxisols from tropical and subtropical regions of the world.     

Multi-parameter reflection waveform inversion for acoustic transversely isotropic media with a vertical symmetry axis

Full waveform inversion in transversely isotropic media with a vertical symmetry axis provides an opportunity to better match the data at the near and far offsets. However, multi-parameter full waveform inversion, in general, suffers from serious cycle-skipping and trade-off problems. Reflection waveform inversion can help us recover a background model by projecting the residuals of the reflected wavefield along the reflection wavepath. Thus, we extend reflection waveform inversion to acoustic transversely isotropic media with a vertical symmetry axis utilizing the proper parameterization for reduced parameter trade-off. From a radiation patterns analysis, an acoustic transversely isotropic media with a vertical symmetry axis is better described by a combination of the normal-moveout velocity and the anisotropic parameters η and δ for reflection waveform inversion applications. We design a three-stage inversion strategy to construct the optimal resulting model. In the first stage, we only invert for the background by matching the simulated reflected wavefield from the perturbations of and δ with the observed reflected wavefield. In the second stage, the background and η are optimized simultaneously and the far-offset reflected wavefield mainly contribute to their updates. We perform Born modelling to compute the reflected wavefield for the two stages of reflection waveform inversion. In the third stage, we perform full waveform inversion for the acoustic transversely isotropic media with a vertical symmetry axis to delineate the high-wavenumber structures. For this stage, the medium is described by a combination of the horizontal velocity , η and ε instead of , η and δ. The acoustic multi-parameter full waveform inversion utilizes the diving waves to improve the background as well as utilizes reflection for high-resolution information. Finally, we test our inversion algorithm on the modified Sigsbee 2A model (a salt free part) and a two-dimensional line from a three-dimensional ocean bottom cable dataset. The results demonstrate that the proposed reflection waveform inversion approach can recover the background model for acoustic transversely isotropic media with a vertical symmetry axis starting from an isotropic model. This recovered background model can mitigate the cycle skipping of full waveform inversion and help the inversion recover higher resolution structures.     

Development of Statistical Models to Predict the Mechanical Properties of Some Metamorphic Rocks from P-Wave Velocity and Certain Physical Properties

Geotechnical and Geological Engineering - Strength and elastic properties of rocks have vital importance for the design of structures in several rock engineering projects. Additionally, these...     

Present state of oil pollution in the northern Indian Ocean

A consolidated picture of oil pollution for the northern Indian Ocean is presented. Oil slicks were sighted on 5582 observations, about 83.5% of the total observations of 6689. The range of concentrations, of the floating tar balls, is 0–6.0 mg/m² in the Arabian Sea. Similarly, the oil tanker route in the Bay of Bengal has the range of 0–69.75 mg/m². North of this route, the Bay of Bengal is comparatively free from this floating tar. Mean concentrations of dissolved and dispersed hydrocarbons for 0–20 m are 32.5 and 24.1 μg kg^?1, respectively, in the Arabian Sea and the Bay of Bengal.