Observation of Pore Spaces and Microcracks Using a Fluorescent Technique in Some Reservoir Rocks of Oil, Gas and Geothermal Fields in the Green Tuff Region, Japan

Abstract: Pore spaces and microcracks in representative oil, gas and geothermal reservoir rocks from the Green Tuff region, Japan, were examined using a fluorescent technique. This technique was developed to visualize microscopically pore spaces and microcracks filled with synthetic resin mixed with fluorescent paint under ultraviolet light. Various morphology of pore spaces and microcracks was clearly identified. Spaces in studied reservoir rocks are classified into following three types: pore spaces in matrix, pore spaces in particles, and microcracks. It is observed that valuable oil and gas reservoir rocks relatively include many pore spaces, while microcracks are important for geothermal rocks. Correlation between textural characteristics and porosity or permeability was found in the oil reservoir rocks. Effective permeability depends upon pore spaces in matrix more than upon other components such as pore spaces in particles and microcracks. Looseness in matrix caused by larger grain size of particles is strongly correlated with permeability. Pore spaces play an important role as a reservoir in oil and gas fields, but are less important in geothermal field. Instead, microcracks are important for geothermal reservoir system.     

A computational procedure for joining separate map sheets

Map sheets have been often used as a basic spatial unit for managing spatial data produced from paper maps. This often results in incompatibility between adjacent map sheets, because spatial objects do not cross the boundaries smoothly and even the boundaries themselves do not match their neighbors exactly. To solve the problem this paper proposes a computational procedure for joining separate map sheets to obtain seamless spatial data. Line objects digitized separately in different map sheets are considered, which are frequently used to represent road networks, gas pipelines, and boundaries of polygon objects. The procedure consists of three steps: (1) extraction of end nodes, (2) detection of matching nodes, and (3) transformation of the map sheet. Each step goes interactively so that unexpected errors can be avoided by human observation. To test the validity of the procedure, map sheets are combined containing the road network data of Tokyo 23-ku area, Japan. This revised version was published online in July 2006 with corrections to the Cover Date.     

A new fault rupture scenario for the 2003 Mw 6.6 Bam earthquake, SE Iran: Insights from the high-resolution QuickBird imagery and field observations

The December 26, 2003 M_w 6.6 Bam earthquake is one of the most disastrous earthquakes in Iran. QuickBird panchromatic and multispectral satellite imagery with 61 cm and 2.4 m ground resolution, respectively provide new insights into the surface rupturing process associated with this earthquake. The results indicate that this earthquake produced a 2–5 km-wide surface rupture zone with a complex geometric pattern. A 10-km-long surface rupture zone developed along the pre-existing Bam fault trace. Two additional surface rupture zones, each 2–5 km long, are oblique to the pre-existing Bam fault in angles of 20–35°. An analysis of geometric and geomorphic features also shows that movement on the Bam fault is mainly right-lateral motion with some compressional component. This interpretation is consistent with field investigations, analysis of aftershocks as well as teleseismic inversion. Therefore, we suggest that the 2003 Bam earthquake occurred on the Bam fault, and that the surface ruptures oblique to the Bam fault are caused by secondary faulting such as synthetic shears (Reidel shears). Our fault model for the Bam earthquake provides a new tectonic scenario for explaining complex surface deformations associated with the Bam earthquake.     

Development of partial factor design method on bending strength of piles for Japanese Specifications for Highway Bridges

ABSTRACT

This paper describes the development of a partial factor design method on the bending strength of piles for the Japanese Specifications for Highway Bridges. First, uncertainties in mobilised bending moments and yield bending moments were evaluated by Monte Carlo simulations. Second, the reliability of piles designed by the previous specifications were evaluated on the basis of reliability analysis considering uncertainties in the mobilised bending moments, yield bending moments, and other factors. Finally, a partial factor design method utilising a survey subsurface investigation method and ground type was developed to reach target reliability levels determined by the Standards.     

Total amount of oceanic excess CO2 taken from the North Pacific subpolar region

Concentrations of total carbonate, alkalinity and dissolved oxygen were obtained near the 1973 GEOSECS stations in the North Pacific subpolar region north of 40°N along 175°E between 1993 and 1994. A difference of excess CO₂ content between the GEOSECS and our expeditions was estimated. The maximum difference in water column inventory of excess CO₂ has increased by about 280 gC m^–2 above 2000 m depth which apparently means an uptake of excess CO₂ taken from air to sea during the last two decades. An averaged value of the annual flux of excess CO₂ at 75–1000 m depth was 8.63±2.01 gC m^–2yr^–1 in the North Pacific subpolar region. By introducing the annual flux of excess CO₂ into a two-box model for the North Pacific subpolar region, a penetration factor of excess CO₂ from air to sea was obtained to be 1.08×10^–2 gC m^–3ppm^–1 in the North Pacific subpolar region. Based on this factor, the surface concentration of excess CO₂ in the North Pacific subpolar region was estimated to be 68 mole I^–1, suggesting that the North Pacific subpolar region absorbed atmospheric excess CO₂ more than the saturated concentration of excess CO₂. Total amount of excess CO₂ taken from the North Pacific subpolar region by 1993 was estimated to be 36.2×10¹⁵ gC, which was equal to about one tenth of that released by human activities after the preindustrial era.     

Application of a fluorescent technique to the study of the weathering process

Processes and rates of weathering in representative tuff obtained from a Green Tuff region were directly examined using a new fluorescent approach. This approach was developed to visualize microscopically the microcracks and micropores that contribute to deterioration. The following observations were made. Progression of tuff weathering is caused by a delicate balance between chemical alteration and physical disintegration. Weathering occurs in many hidden microcracks and micropores not detected under natural light, but which can be clearly visualized under ultraviolet light. Water pathways, such as microcracks and cavities, accelerated the chemical alteration by increasing the effective surface area of rocks in contact with water. As the reaction proceeds, the constituent materials loosen and alteration products become widespread in the matrix. Secondary amorphous to poorly crystallized materials, such as iron hydroxide and aluminosilicate, precipitate on the fracture surfaces, slowing the progress of weathering. At the ultimate stage of weathering in tuff, all cracks and most of the micropores are filled with secondary materials. These observations on a microscopic scale during tuff weathering agree with the assessment of weathering obtained by measuring porosity, P-wave velocity and tensile strength.     

Size fraction and class composition of phytoplankton in the Antarctic marginal ice zone along the 140°E meridian during February–March 2003

We investigated the size fraction and pigment-derived class compositions of phytoplankton within the euphotic zone of the Antarctic marginal ice zone between 63.3°S and 66.5°S along the 140°E meridian on two consecutive cruises in the late austral summer and early austral autumn of 2003. We observed significant temporal and spatial variations in phytoplankton size and taxonomic composition, although chlorophyll a concentrations were generally below 1 μg l⁻¹ during both periods. Microphytoplankton (>20 μm), mainly diatoms, were prominent in the euphotic zone in the southernmost area around 66.5°S during late summer. In the rest of the study area during both cruises, the phytoplankton community was dominated by pico- and nano-sized populations (<20 μm) throughout the euphotic zone. The small-size populations mostly consisted of diatoms and haptophytes, although chlorophytes were dominant in extremely cold water (−1.5°C) below the overlying warm water around 65.5°S during late summer. From late summer to early autumn, chlorophytes declined in abundance, probably due to increasing temperature within the euphotic zone (−1 to 0°C). These pico- and nano-phytoplankton-dominated populations were often accompanied by relatively high concentrations of ammonium, suggesting the active regeneration of nutrients within the small-size plankton community.     

Turbulent diffusion in a shearing oscillatory flow

The diffusion in a shearing oscillatory flow from an instantaneous surface point source is considered. An analytical solution is obtained by Fourier transform. The results show that, for three dimensional diffusion in an oscillatory flow with constant shear, the distribution of the contaminant follows the multivariate Gaussian distribution rule. When the frequency is very high, or the time very short, the shear does not influence the diffusion. For moderate values of time, there are fluctuations with longitudinal variance. For large values of time the longitudinal variance increases as t, and the peak concentration decreases as t^−1.5, which are faster than those in a flow without shear, but much slower than those in a steady flow, where the longitudinal variance increases as t³ and the peak concentration decreases as t^−2.5. The contaminant patch is elongated in the longitudinal direction of the shear flow and moves back and forth with the water motion. Contribution No. 1306 from the Institute of Oceanology, Academia Sinica. Received July 12, 1985     

Influence of the asymmetrical cratering rate on the lunar cratering chronology

The lunar cratering rate studied over the past 1.1 Gyr, which is a foundation of the lunar cratering chronology, is a decreasing function of the angular distance from the apex of the orbital motion due to the synchronous rotation of the Moon. We here evaluate an influence of the asymmetrical rate upon the age determination.