Water saturated phase relations of some andesites with application to the estimation of the initial temperature and water pressure at the time of eruption

Near-liquidus phase relations in one-atmosphere dry and water-saturated high pressure conditions were experimentally determined on products of three historic andesitic eruptions. Run conditions ranged from 900 to 1100°C, at pressures up to 1500 bars with fO₂ controlled close to the nickel-nickel oxide (NNO) buffer. In order to represent the compositions of the true liquid parts of the erupting magmas, groundmass portions were mechanically separated from the porphyritic andesites. Such groundmass materials should lie exactly on the liquidus field boundary between the phases precipitating from the magma just prior to eruption under the prevailing P-T condition.All the samples showed a crossing of the plagioclase and orthopyroxene liquidi in the pressure-temperature range from 1 to 800 bar and 950–1090°C. The crossing condition approximates the magmatic condition immediately prior to eruption. In the case of the 1970 eruption of Akita-komagatake, the crossing point is at 150 bar and 1090°C, matching closely the observed explosive gas pressure and the temperature. In both cases of the 1783 eruption of Asama and the 1914–1915 eruption of Sakurajima volcanoes, the crossing point shift from higher water pressure and lower temperature for the earlier erupting magmas to lower pressure and higher temperature for the later magmas. This regularity may be explained by a vertical gradient of the temperature and water content within the magma column prior to eruption.     

New K–Ar ages for calculating end-of-shield extrusion rates at West Maui volcano,Hawaiian island chain

Thirty-seven new K–Ar ages from West Maui volcano, Hawai‘i, are used to define the waning stages of shield growth and a brief episode of postshield volcanism. All but two samples from shield-stage strata have reversed polarity magnetization, so conceivably the exposed shield is not much older than the Olduvai Normal-Polarity subchron, or about 1.8 Ma. The oldest ages obtained are in the range 1.9–2.1 Ma but have large analytical error. Shield volcanism ended about 1.35 Ma, and postshield volcanism followed soon thereafter, persisting until about 1.2 Ma. Exposed shield-stage strata were emplaced at a rate of about 0.001 km³ per year, a rate smaller than historic Hawaiian magmatic rates by a factor of 100. Stratigraphic accumulation rates are similar to those measured previously at Wai‘anae volcano (O‘ahu) or the upper part of the Mauna Kea shield sequence (Hilo drill core, Hawai‘i). These rates diminish sharply during the final 0.3–0.5 m.y. of the shield stage. Hawaiian shield volcanoes begin waning well before their last 0.5 m.y. of life, then end quickly, geologically speaking, if West Maui is representative.     

MOS-1/1b MESSR Observations of the Antarctic Sea Ice: Ice Bands and Ice Streamers

Meso- or submeso-scale features of the Antarctic sea ice are investigated using the MOS-1/1b MESSR Images (spatial resolution of approximately 50 m) received at Syowa Station. Particular attention is paid to the ice bands and ice streamers in coastal polynyas. In the Antarctic Ocean, ice bands can be often seen not only at the ice edge but also in the ice interior zone throughout the year and they extend for hundreds of kilometers in the latitudinal direction. It is found that the width and spacing of ice bands tend to decrease from winter to summer. The width of ice band is about 2–6 km in August and September, and 0.1–0.7 km in December. The spacing of ice bands is about 3–10 km in August and September, and 0.1–2 km in December. In coastal polynyas, ice streamers, which are composed of new ice, are sometimes observed. In general, the row of the streamers is spaced at 0.5–2 km with a width of 0.1–1.0 km.     

Influence of the asymmetrical cratering rate on the lunar cratering chronology

The lunar cratering rate studied over the past 1.1 Gyr, which is a foundation of the lunar cratering chronology, is a decreasing function of the angular distance from the apex of the orbital motion due to the synchronous rotation of the Moon. We here evaluate an influence of the asymmetrical rate upon the age determination.     

Earthquake‐related geomorphic environment and pond sediment information

Shaking during the 1995 Kobe earthquake caused surface material to be more mobile in catchment areas in the Rokko Mountains, Kobe, where there are some active fault lines. As a result, there were many landslides associated with the earthquake. The sedimentation rate in a pond in the mountains increased several fold, then exponentially decreased with seasonality over several years. Six years after the earthquake there were no marked surface movements related to the earthquake, even though the sedimentation rates had increased slightly. A new steady state for the structure of the earthquake‐modi?ed surface had evidently been reached. Copyright © 2004 John Wiley & Sons, Ltd.     

A new fault rupture scenario for the 2003 Mw 6.6 Bam earthquake, SE Iran: Insights from the high-resolution QuickBird imagery and field observations

The December 26, 2003 M_w 6.6 Bam earthquake is one of the most disastrous earthquakes in Iran. QuickBird panchromatic and multispectral satellite imagery with 61 cm and 2.4 m ground resolution, respectively provide new insights into the surface rupturing process associated with this earthquake. The results indicate that this earthquake produced a 2–5 km-wide surface rupture zone with a complex geometric pattern. A 10-km-long surface rupture zone developed along the pre-existing Bam fault trace. Two additional surface rupture zones, each 2–5 km long, are oblique to the pre-existing Bam fault in angles of 20–35°. An analysis of geometric and geomorphic features also shows that movement on the Bam fault is mainly right-lateral motion with some compressional component. This interpretation is consistent with field investigations, analysis of aftershocks as well as teleseismic inversion. Therefore, we suggest that the 2003 Bam earthquake occurred on the Bam fault, and that the surface ruptures oblique to the Bam fault are caused by secondary faulting such as synthetic shears (Reidel shears). Our fault model for the Bam earthquake provides a new tectonic scenario for explaining complex surface deformations associated with the Bam earthquake.     

Application of a fluorescent technique to the study of the weathering process

Processes and rates of weathering in representative tuff obtained from a Green Tuff region were directly examined using a new fluorescent approach. This approach was developed to visualize microscopically the microcracks and micropores that contribute to deterioration. The following observations were made. Progression of tuff weathering is caused by a delicate balance between chemical alteration and physical disintegration. Weathering occurs in many hidden microcracks and micropores not detected under natural light, but which can be clearly visualized under ultraviolet light. Water pathways, such as microcracks and cavities, accelerated the chemical alteration by increasing the effective surface area of rocks in contact with water. As the reaction proceeds, the constituent materials loosen and alteration products become widespread in the matrix. Secondary amorphous to poorly crystallized materials, such as iron hydroxide and aluminosilicate, precipitate on the fracture surfaces, slowing the progress of weathering. At the ultimate stage of weathering in tuff, all cracks and most of the micropores are filled with secondary materials. These observations on a microscopic scale during tuff weathering agree with the assessment of weathering obtained by measuring porosity, P-wave velocity and tensile strength.     

Small scale turbulent diffusion determined with underwater flow visualization

Dye plumes were generated at three depths in the seasonal thermocline between 7 and 11 m, 22 km south of Key West on 21 August 1980 and photographed at about 10 second intervals with an underwater camera system. Eleven pairs of consecutive pictures are analyzed to determine the mean current vertical shear and the width of the plumes by positioning reference points relative to the rod attached to the camera system. The relative distances of reference points are calibrated with the stereophotogrammetric method for one pair. The eddy diffusivity is calculated by use of a model of turbulent diffusion developed byTaylor (1921). Its values range from 5 to 25 cm²s^–1 for the plume widths ranging from 33 to 132 cm. The Richardson number is calculated for each pair of pictures with the vertical density gradient estimated from temperature profiles. Its values are higher than the critical value of 0.25 except for one case. The diffusivity was higher by orders of magnitude than the molecular one and indicates the presence of turbulence together with billow like features of the plumes in spite of high Richardson numbers. This suggests that the billow turbulence might be caused by effects of surface gravity waves and not by the Kelvin-Helmholtz instability.     

Liquid bridge contribution to shear behavior of unsaturated soil: modeling and application to a micromechanics model

Acta Geotechnica - Liquid bridges in unsaturated soils attach to grain contacts and contribute to strengthening microscopic bonding forces, which leads to macroscopic high strength and stiffness...