Octahedral-site Fe2+ quadrupole splitting distributions from Mössbauer spectroscopy along the (OH, F)-annite join

We have performed a detailed Mössbauer study of synthetic annites on the (OH, F)-join. Recently developed data treatment and spectral analysis methods were used to extract true intrinsic Fe²⁺ quadrupole splitting distributions (QSDs) that represent the most information that can be resolved from the spectra. The overall room temperature (RT) QSDs can be consistently interpreted in terms of four QSD contributions (or populations) centered at: QS_HH2.55 mm/s for Fe²⁺O₄(OH)₂ octahedra (cis and trans not resolved), QS_HF 2.35 mm/s for Fe²⁺O₄(OH)F octahedra (cis and trans not resolved), QS_cFF2.15 mm/s for cis-Fe²⁺O₄F₂ octahedra, and QS_tFF 1.5 mm/s for trans-Fe²⁺O₄F₂ octahedra. Each such contribution has a width ( 0.2 mm/s) caused by distortions of the octahedra. Minor contributions due to Fe²⁺O₅(OH) and Fe²⁺O₅F octahedra probably also contribute to the overall Fe²⁺ QSDs. The ferric iron spectral components were also characterized. Here, two distinct types of octahedral Fe³⁺ contributions are seen and interpreted as being due mainly to Fe³⁺O₅OH and Fe³⁺O₅F octahedra, respectively. Tetrahedral Fe³⁺ is seen only in the OH-annite end-member and the total Fe³⁺ content drops significantly on addition of F. On leave from: Department of Materials Physics, University of Science and Technology Beijing, 100083 Beijing, China     

Propagation of MHD body and surface waves in magnetically structured regions of the solar atmosphere

The fact that magnetically structured regions exist in the solar atmosphere has been known for a number of years. It has been suggested that different kinds of magnetohydrodynamic (MHD) waves can be efficiently damped in these regions and that the dissipated wave energy may be responsible for the observed enhancement in radiative losses. From a theoretical point of view, an important task would be to investigate the propagation and dissipation of MHD waves in these highly structured regions of the solar atmosphere. In this paper, we study the behavior of MHD body and surface waves in a medium with either a single or double (slab) magnetic interface by use of a nonlinear, two-dimensional, time-dependent, ideal MHD numerical model constructed on the basis of a Lagrangean grid and semi-implicit scheme. The processes of wave confinement and wave energy leakage are discussed in detail. It is shown that the obtained results depend strongly on the type of perturbations imposed on the interface or slab and on the plasma parameter, . The relevance of the obtained results to the heating problem of the upper parts of the solar atmosphere is also discussed.     

Coherent eddies and turbulence in vegetation canopies: The mixing-layer analogy

This paper argues that the active turbulence and coherent motions near the top of a vegetation canopy are patterned on a plane mixing layer, because of instabilities associated with the characteristic strong inflection in the mean velocity profile. Mixing-layer turbulence, formed around the inflectional mean velocity profile which develops between two coflowing streams of different velocities, differs in several ways from turbulence in a surface layer. Through these differences, the mixing-layer analogy provides an explanation for many of the observed distinctive features of canopy turbulence. These include: (a) ratios between components of the Reynolds stress tensor; (b) the ratio K _H/K _M of the eddy diffusivities for heat and momentum; (c) the relative roles of ejections and sweeps; (d) the behaviour of the turbulent energy balance, particularly the major role of turbulent transport; and (e) the behaviour of the turbulent length scales of the active coherent motions (the dominant eddies responsible for vertical transfer near the top of the canopy). It is predicted that these length scales are controlled by the shear length scale % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaamitamaaBa% aaleaacaWGtbaabeaakiabg2da9iaadwfacaGGOaGaamiAaiaacMca% caGGVaGabmyvayaafaGaaiikaiaadIgacaGGPaaaaa!3FD0!\[L_S = U(h)/U'(h)\] (where h is canopy height, U(z) is mean velocity as a function of height z, and % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGabmyvayaafa% Gaeyypa0JaaeizaiaadwfacaGGVaGaaeizaiaadQhaaaa!3C32!\[U' = {\rm{d}}U/{\rm{d}}z\]). In particular, the streamwise spacing of the dominant canopy eddies is _x = mL _s, with m = 8.1. These predictions are tested against many sets of field and wind-tunnel data. We propose a picture of canopy turbulence in which eddies associated with inflectional instabilities are modulated by larger-scale, inactive turbulence, which is quasi-horizontal on the scale of the canopy.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

A photochemical model of the martian atmosphere

The factors governing the amounts of CO, O2, and O3 in the martian atmosphere are investigated using a minimally constrained, one-dimensional photochemical model. We find that the incorporation of temperature-dependent CO2 absorption cross sections leads to an enhancement in the water photolysis rate, increasing the abundance of OH radicals to the point where the model CO abundance is smaller than observed. Good agreement between models and observations of CO, O2, O3, and the escape flux of atomic hydrogen can be achieved, using only gas-phase chemistry, by varying the recommended rate constants for the reactions CO + OH and OH + HO2 within their specified uncertainties. Similar revisions have been suggested to resolve discrepancies between models and observations of the terrestrial mesosphere. The oxygen escape flux plays a key role in the oxygen budget on Mars; as inferred from the observed atomic hydrogen escape, it is much larger than recent calculations of the exospheric escape rate for oxygen. Weathering of the surface may account for the imbalance. Quantification of the escape rates of oxygen and hydrogen from Mars is a worthwhile objective for an upcoming martian upper atmospheric mission. We also consider the possibility that HOx radicals may be catalytically destroyed on dust grains suspended in the atmosphere. Good agreement with the observed CO mixing ratio can be achieved via this mechanism, but the resulting ozone column is much higher than the observed quantity. We feel that there is no need at this time to invoke heterogeneous processes to reconcile models and observations.     

Radiation-hydrodynamic waves and global solar oscillations

We investigate nonadiabatic hydrodynamic waves in a nongrey, radiating, thermally conducting, homogeneous atmosphere in LTE with a finite mean free path of photons. Avoiding the Eddington approximation the remaining simplifications in the basic equations are discussed, the generalized dispersion relation is analysed, and some wave properties in a grey model are studied. The properties of waves in a stratified atmosphere are analysed as well. In connection with the predicted properties of the nonadiabatic waves we discuss observations ofp-modes by measuring brightness fluctuations.     

Arctic haze: Perturbation to the radiation field

Summary A model of the polluted arctic troposphere is constructed to estimate the magnitude and seasonal variation of the climate forcing function of arctic haze. Using a pill-box bathtub model for the Arctic and envisioning it to be filled with pollution from industrial sources in Eurasia, we estimate that maximum climate perturbation from arctic contamination occurs in the spring months. The major perturbation to the radiation budget is a lowering of the albedo (heating) of the earth-atmosphere system around the vernal equinox and is due to a trace amount (about 5% by mass) of black carbon associated with the removal-resistant submicron mode of aerosols. The black carbon over the reflecting polar ice/snow introduces a heating of about 1.5 degree per day into the haze layer.With 8 Figures     

On the sampling of airborne measurements of radiative properties of cloud fields: Results from International Cirrus Experiment (ICE), 1987

Summary During the first pilot phase of the International Cirrus Experiment (ICE) in September/October 1987 radiation measurements were carried out above and below broken cloud fields over the German Bight. Analyses of the measurements of 25.9.1987 (broken cumulus cloud field) showed an unexpected high absorption of solar radiation but not those of 28.9.1987 (stratocumulus/stratus cloud field). This might be explained by a partial negligence of cloud side factor under the viewing geometry of the pyranometer and other reasons. The light guide effect (leakage) within holes can account for the depletion of cloud reflectance and the enhancement of cloud transmittance at large cloud cover, as observed during the measurements on 28.9.1987. The fluctuation of the irradiances, which can be characterized by the intermittency parameter, has been related to the corresponding cloud cover by a regression equation. On the condition of similarity, this scaling parameter derived from sample measurements could be extrapolated to that of the whole cloud field. Thus, the estimation of the irradiance spectrum for the whole cloud field may be possible, from samples taken with aircraft and imaging data.With 5 Figures     

Kinetics of peptide hydrolysis and amino acid decomposition at high temperature

Dipeptide hydrolysis and amino acid decomposition appear to follow a first-order rate law. The hydrolysis rate increases exponentially with increasing temperature in aqueous solution at both 265 atm and water steam pressures over the temperature range of 100 to 220 degrees C. Dipeptide hydrolysis has a lower apparent activation energy at 265 atm (44.1 KJ/mol) than at water steam pressure (98.9 KJ/mol). At lower temperatures (<200-220 degrees C), the rate of peptide bond hydrolysis is faster at 265 atm than at water steam pressure. At higher temperatures (>200-220 degrees C), however, peptide bond hydrolysis is slower at 265 atm than at water steam pressure. In aqueous solution, amino acid decomposition rates also increase exponentially with increasing temperature. Amino acid decomposition rates are much higher at 265 atm than at water steam pressure over the entire temperature range investigated.     

Molecular and bulk isotopic analyses of organic matter in marls of the Mulhouse Basin (Tertiary, Alsace, France)

Contents of 13C in kerogens and carbonates in 21 samples from a core of the MAX borehole, Mulhouse Evaporite Basin, range from -27.3 to -23.5 and -3.7 to -1.8% vs PDB, respectively. Organic nitrogen in the same samples is enriched in 15N relative to atmospheric N2 by 12.2-15.7%. Hydrogen indices and delta values for kerogens vary systematically with facies, averaging 493 mg HC/g Corg and -25.7% in the most saline facies (dominated by inputs from aquatic sources) and 267 mg HC/g Corg and -23.7% in the least saline facies (50/50 aquatic/terrigenous). Values of delta were measured for individual aliphatic hydrocarbons from three samples representing three different organic facies. For all samples, terrigenous inputs were unusually rich in 13C, the estimated delta value for bulk terrigenous debris, apparently derived partly from CAM plants, being -22.5%. In the most saline facies, isotopic evidence indicates the mixing of 13C-depleted products of photosynthetic bacteria with 13C-enriched products of halotolerant eukaryotic algae. At lower salinities, a change in the producer community is marked by a decrease in the 13C content of algal lipids. The content of 13C in algal lipids increases in the least saline facies, due either to succession of different organisms or to decreased concentrations of dissolved CO2.