Groundwater management scenarios for the Biyadh-Wasia aquifer systems in the eastern part of Riyadh region,Saudi Arabia

Groundwater stored in the deep seated sedimentary aquifers is the most important source of water supply. The lack of sufficient groundwater recharge and the overdependence on groundwater might lead to unavailability of this precious natural resource if proper management practices are not adopted. Finite difference modelling using the MODFLOW program was carried out in the east of Riyadh city to simulate the groundwater level conditions under different abstraction scenarios. The simulated aquifer system combines the Wasia and Biyadh aquifer (composed of sandstone) and Aruma aquifer (limestone) which lies between 24°30'00"- 25°30'00" N and longitudes 47°00'00"- 48°00'00"E. The transmissivity and storage coefficient values of Biyadh aquifer are 7.0x10^-3 to 7.0x10^-2 m²/day and 3.7x10^-4 to 9.4x10^-4 respectively. The transmissivity and storage coefficient values of Wasia aquifer ranges from 6.7x10^-3 to 8.5x10^-2 m²/day and 2x10^-4 to 2.3x10^-4 respectively. The model calibration involved altering the values of model input parameters to match field conditions within certain acceptable limits to forecast the aquifer response over a period of 35 years (2015-2050). The modelling grid consisted of 20 and 24 columns with the grids spacing of 4 km for the small grids and 6 km for large grids. The results showed that though the Wasia aquifer was productive, it showed a large decline in water levels if water abstraction continued at the present rate. If the existing trends of groundwater withdraw continues; the piezometric heads in Wasia and Biyadh aquifers will decline by the year 2050. A reduction in 25% of the existing groundwater pumping rate in the well field will minimize the rate of groundwater decline in the aquifer to a considerable extent.     

Seismo-stratigraphic and structural interpretation of seismic data of Titas gas field,Bengal basin,Bangladesh

In the present study, seismic interpretation has been carried out over Titas structure of Bengal basin, Bangladesh to figure out its seismo-stratigraphic and structural behavior. Seven well marked reflecting horizons (R-01 to R-07) have been identified within the Neogene sedimentary sequences using 18 seismic sections and well log data. A new seismic stratigraphy of Neogene sequences has been proposed for the Titas structure ruling out the traditional lithostratigraphy. The studied structure has been divided into 3 megasequences (MS1, MS2 and MS3). Reflector R-01 and R-03 represent the tops of the megasequence 2 (MS2) and megasequence 1 (MS1) respectively. These well marked reflectors are correlated with the top of the traditional litho-groups called Tipam and Surma. Reflectors R-02 and R-04 represent acoustic impedance boundaries within MS2 and MS1 due to lithological gradation. However, R-02 and R-04 are not considered as sequence/ formation boundaries because geologically these are not well defined. Reflectors R-05, R-06 and R-07 represent top of the gasbearing zones A, B and C that belongs to MS1. All these interfaces or reflectors are anti-form with a central long crestal zone. It forms a north-south trending semi-domal sub-surface anticlinal structure having a semi-dome shaped closure. The structure is asymmetric with steeper eastern flank and gentler western flank. The crestal region is essentially plain with discontinuous reflection. The semidomal nature of the anticline is in contrast to the neighboring narrow anticlines. Structural pattern suggests its development in relation to the NE-SW trending stress field due to convergence of Indian plate with Burmese plate. Structures of the shallower and deeper reflectors are formed at different phases of structural development.     

Simulation of Vortex-Induced Vibrations of A Cylinder Using ANSYS CFX Rigid Body Solver

This article simulates the vortex-induced oscillations of a rigid circular cylinder with elastic support using the new ANSYS CFX rigid body solver. This solver requires no solid mesh to setup FSI (Fluid Structure Interaction) simulation. The two-way case was setup in CFX only. Specific mass of the cylinder and flow conditions were similar to previous experimental data with mass damping parameter equal to 0.04, specific mass of 1 and Reynolds number of 3800. Two dimensional simulations were setup. Both one-degree-of-freedom and two-degree-of-freedom cases were run and results were obtained for both cases with reasonable accuracy as compared with experimental results. Eight-figure XY trajectory and lock-in behavior were clearly captured. The obtained results were satisfactory.     

Comparison between inductively coupled plasma and X-ray fluorescence performance for Pb analysis in environmental soil samples

Comparison of two conventional analytical techniques such as X-ray fluorescence (XRF) and inductively coupled plasma mass spectrometry (ICP-MS) for measuring Pb concentrations in soil samples was achieved using field and laboratory work. Seventy-three samples were collected from urban areas surrounding the large lead smelter at South Australia, as an indicator of the environment impact of smelter activity. Soil Pb concentrations were determined using hand-held XRF analyser under laboratory conditions. ICP-MS analysis on digested soils (using a microwave-assisted nitric acid digestion-extraction) was applied to validate p-XRF data. The analysis showed that Pb concentrations determined by XRF correlated with high linearity with Pb concentrations determined by ICP-MS measurements (R ² = 0.89). Statistical test (t test) was applied to the data of both methods applied without any significant difference between the two techniques. These results indicated that ICP-MS corroborated XRF for Pb soil measurements and suggests that XRF was a reliable and quick alternative to traditional analytical methods in studies of environmental health risk assessment, allowing for much larger sampling regimes in relatively shorter times and could be applied in the field.     

Modelling the vulnerability of groundwater to contamination in an unconfined alluvial aquifer in Pakistan

The area of Thal Doab is located in the Indus Basin and is underlain by a thick alluvial aquifer called the Thal Doab aquifer (TDA). The TDA is undergone intense hydrological stress owing to rapid population growth and excessive groundwater use for livestock and irrigated agricultural land uses. The potential impact of these land uses on groundwater quality was assessed using a DRASTIC model in a Geographic Information System environment. Seven DRASTIC thematic maps were developed at fixed scale and then combined into a groundwater vulnerability map. The resultant vulnerability index values were grouped into four zones as low, moderate, high and very high. The study has established that 76% of the land area that is underlain by the TDA has a high to very high vulnerability to groundwater contamination mainly because of a thin soil profile, a shallow water table and the presence of soils and sediments with high hydraulic conductivity values. In addition, only 2 and 22% of the total area lie in low and moderate vulnerability zones, respectively. The outcomes of this study can be used to improve the sustainability of the groundwater resource through proper land-use management.     

Recharge mechanism and processes controlling groundwater chemistry in a Precambrian sedimentary terrain: a case study from Central India

Unplanned and unsustainable extraction has created stress on groundwater resources in many parts of India. The stress symptoms are more pronounced in hard rock areas, where the aquifer potentials are comparatively low. Present research targeted an area of 3000 km² in the interstream region between the Kharun and Seonath rivers, which is one such region in Central India. In spite of being a water-stressed area, so far, little is understood about processes of recharge, amount of recharge and processes controlling chemical quality, which are key inputs for groundwater management in the area. This study presents an appraisal of recharge mechanism, recharge rate and prevailing water–rock interactions in the study area. Stable isotope composition of groundwater when compared to that of rainfall indicates monsoon rainfall as the primary source of groundwater recharge. Winter rains, which are characteristically enriched in heavier isotopes, do not contribute notably to groundwater recharge. Recharge is rapid with minor or no evaporative enrichment before recharge. Further, analysis of stable isotopes show that ‘macropore recharge’ is dominant in limestone or calcareous shale, covering more than 70% of the study area. Also apparent is the vertical connectivity amongst the aquifers. However, active intermixing of surface water and groundwater is not a predominant process. Annual groundwater recharge from rainfall, as derived from chloride mass balance, is 105.26 million cubic metre. Groundwater is predominantly of bicarbonate type, irrespective of its hydrostratigraphic (lithology) setting. Dissolution of carbonates and gypsum (occurring as veins), weathering of feldspar and ion exchange of clay minerals are amongst the most likely processes controlling the regional groundwater chemistry.     

Construction of the granitoid crust of an island arc part I: geochronological and geochemical constraints from the plutonic Kohistan (NW Pakistan)

We present major and trace element analyses and U–Pb zircon intrusion ages from I-type granitoids sampled along a crustal transect in the vicinity of the Chilas gabbronorite of the Kohistan paleo-arc. The aim is to investigate the roles of fractional crystallization of mantle-derived melts and partial melting of lower crustal amphibolites to produce the magmatic upper crust of an island arc. The analyzed samples span a wide calc-alkaline compositional range (diorite–tonalite–granodiorite–granite) and have typical subduction-related trace element signatures. Their intrusion ages (75.1 ± 4.5–42.1 ± 4.4 Ma) are younger than the Chilas Complex (~85 Ma). The new results indicate, in conjunction with literature data, that granitoid formation in the Kohistan arc was a continuous rather than punctuated process. Field observations and the presence of inherited zircons indicate the importance of assimilation processes. Field relations, petrographic observations and major and trace element compositions of the granitoid indicate the importance of amphibole fractionation for their origin. It is concluded that granitoids in the Kohistan arc are derivative products of mantle derived melts that evolved through amphibole-dominated fractionation and intra crustal assimilation.     

Geochemistry of Dharwar ultramafics and the Archaean mantle

Geochemical and petrological studies on serpentinised ultramafics of Kadakola, Mysore State, India, indicate that the Archaean mantle beneath the Indian Shield was of peridotitic in nature. This protomantle in the Archaean period was undifferentiated with higher concentrations of siderophile and transitional elements.