The effect of sulfur content on density of the liquid Fe–S at high pressure

The density of liquid Fe–S was measured at 4 GPa and 1,923 K using a sink/float method with a composite density marker. The density marker consisted of a Pt rod core and an Al₂O₃ tube surrounding. The uncertainty in the density of the composite marker is much smaller than that of the composite sphere, which had been used in previous density measurements. The density of liquid Fe–S decreases nonlinearly with increasing sulfur content at 4 GPa and 1,923 K. This tendency is consistent with the results measured at ambient pressure. The molar volume of FeS calculated from the measured density gradually increases with sulfur content. The excess molar volume from ideal mixing of Fe and S at 4 GPa was negative value. The new method proposed here is applicable to the density measurement of other Fe alloys at high pressure. The tendency of the molar volume and the excess molar volume with sulfur content at ambient pressure is consistent with these at high pressure at least up to 4 GPa. The excess molar volume at high pressure is essential for estimating the amount of light elements in the outer core.     

Cathaysian slivers in the Philippine island arc: geochronologic and geochemical evidence from sedimentary formations of the west Central Philippines

The use of geodynamic information contained in sedimentary rocks has only recently been extended into the tectonic reconstruction studies of the Philippine archipelago vis-à-vis the rest of the Southeast Asian region. We present here a comparative assessment of clastic units from the western Central Philippines, particularly from the islands of Mindoro, Panay and Palawan, and propose their likely association with sources of Cathaysian origin. Geochronological data from sedimentary formations in the study areas register U–Pb dating peaks at 185–140 Ma, 140–120 Ma and 112–90 Ma. These are similar to those observed of detrital zircons from rocks of Cathaysian origin in Taiwan and Southern China that chronicle the Yanshanian magmatic events. These same formations also record an older intercept at 1.9–1.85 Ga that likely corresponds to a regional continental orogenic episode recorded in the late Paleoproterozoic Cathaysian block. Major (e.g. Al₂O₃/TiO₂) and trace-element (e.g. Y/Ni vs Cr/V) signatures of these sedimentary formations reflect stronger influences from granitic sources than mafic–ultramafic inputs that should otherwise be expected, considering their current oceanic island arc settings. Their La/Th and Th–Co–Zr/10 ratios also reveal continental island arc and active or passive continental margin depositional settings typical of rocks from the Palawan Microcontinental Block. New geochronological and geochemical data from the clastic rocks of northwest Mindoro, in addition to those already published for the other regions of the Palawan Microcontinental Block, provide further evidence for the amalgamation of fragments of Cathaysian origin within the Philippine island arc system.     

Modeling three-dimensional forest structures to drive canopy radiative transfer simulations of bidirectional reflectance factor

Three-dimensional (3-D) Monte Carlo-based radiative transfer (MCRT) models are usually used for benchmarking in intercomparisons of the canopy radiative transfer (RT) simulations. However, the 3-D MCRT models are rarely applied to develop remote sensing algorithms to estimate essential climate variables of forests, due mainly to the difficulties in obtaining realistic stand structures for different forest biomes over regional to global scales. Fortunately, some of important tree structure parameters such as canopy height and tree density distribution have been available globally. This enables to run the intermediate complexities of the 3-D MCRT models. We consequently developed a statistical approach to generate forest structures with intermediate complexities depending on the inputs of canopy height and tree density. It aims at facilitating applications of the 3-D MCRT models to develop remote sensing retrieval algorithms. The proposed approach was evaluated using field measurements of two boreal forest stands at Estonia and USA, respectively. Results demonstrated that the simulations of bidirectional reflectance factor (BRF) based on the measured forest structures agreed well with the BRF based on the generated structures from the proposed approach with the root mean square error (RMSE) and relative RMSE (rRMSE) ranging from 0.002 to 0.006 and from 0.7% to 19.8%, respectively. Comparison of the computed BRF with corresponding MODIS reflectance data yielded RMSE and rRMSE lower than 0.03 and 20%, respectively. Although the results from the current study are limited in two boreal forest stands, our approach has the potential to generate stand structures for different forest biomes.     

Phytoplankton growth and microzooplankton grazing in the Sea of Okhotsk during late summer of 2006

The Sea of Okhotsk is one of the most productive marine basins in the world ocean and plays an important role in transport of organic carbon and iron to the western subarctic Pacific. We report the first measurements of phytoplankton growth and microzooplankton grazing rates in the Sea of Okhotsk, in late summer of 2006. The study area can be divided into two areas: nutrient-sufficient waters on the continental shelf along the east coast of Sakhalin Island and in the vicinity of Bussol Strait, and surface nutrient-depleted waters beyond the shelf break and in the vicinity of Sakhalin Bay. Phytoplankton growth rate in the studied area was strongly affected by nutrient availability, with high phytoplankton growth rate (0.55±0.14 d^?1) in the nutrient-replete region and severely depressed growth (0.03±0.05 d^?1) in the nutrient-depleted region. On the other hand, microzooplankton grazing rates in both the nutrient-replete and nutrient-depleted regions were approximately the same (0.26±0.20 d^?1 vs. 0.27±0.24 d^?1). Consequently, microzooplankton grazing consumed <50% of the phytoplankton growth in nutrient-rich waters but >3 times the phytoplankton growth in nutrient-depleted waters. Phytoplankton physiological condition as measured by the maximum photochemical quantum efficiency (F_v/F_m) of algal photosystem II (PS II) showed a general trend in agreement with the in situ growth rate of phytoplankton. In contrast to the phytoplankton community, picophytoplankton, especially the cyanobacteria Synechococcus, showed no nutrient effect on their growth, and the growth and mortality rates were well balanced, suggesting that they have a low nutrient requirement and their biomass was controlled principally by microzooplankton grazing.     

High-pressure X-ray diffraction study of ε-FeOOH

An in situ synchrotron X-ray diffraction study was carried out on ε-FeOOH at room temperature up to a pressure of 8.6 GPa using the energy-dispersive method. The linear compressibility was determined to be β _a  = 1.69(3) × 10⁻³ GPa⁻¹, β _b  = 2.86(6) × 10⁻³ GPa⁻¹, and β _c  = 1.73(5) × 10⁻³ GPa⁻¹. The b-axis of the unit cell is more compressible than the a and c axes. The pressure–volume data were fitted to a third-order Birch–Murnaghan equation of state. The best fit was found using a room temperature isothermal bulk modulus of K ₀ = 126(3) GPa and its pressure derivative K′ = 10(1).     

New insights into the origin of O–Hf–Os isotope signatures in arc lavas from Tonga–Kermadec

O, Hf and Os isotope data are presented for lavas from the highly depleted Tonga–Kermadec arc. O isotope values overlap with those of MORB limiting the amount of interaction with the arc crust. δ¹⁸O does not increase northwards as would be expected from the ~ 4 fold increase in subduction rate if slab-derived fluids had high ¹⁸O/¹⁶O ratios. Thus, the overall northward decrease in HFSE concentrations likely reflects depletion due to prior melt extraction, not increasing extents of melting. Hf isotopes are strongly negatively correlated with Be isotopes consistent with mixing of subducted pelagic sediment into the mantle wedge and do not require Hf to be fluid mobile. With the exception of a boninite from the north Tongan trench, the northern Tonga lavas do not overlap the Hf isotope composition of either the Samoan plume or the subducting Louisville volcaniclastic sediments. Thus, the Pb isotope signatures in these lavas must have been added by fluids and sediment melts derived from the Louisville volcaniclastics with minimal mobilisation of Hf. This suggests conservative behaviour for this element due to the formation of residual zircon during partial melting of the subducted sediments. ¹⁸⁷Os/¹⁸⁸Os ranges from 0.1275 to 0.4731 and the higher Os isotope ratios reflect the sensitivity of this system to even minor interaction with altered arc crust. Conversely, the lowest Os ratios are subchondritic and indicate that transfer of radiogenic Os from the slab is not all pervasive and provide an important constraint on the composition of the mantle wedge. Remarkably, the least radiogenic sample is a dacite demonstrating that evolved magmas can develop by fractionation from mantle-derived magmas with minimal interaction with the arc crust.     

An interpretation of the decay characteristics of solar hard X-ray bursts

A simple trap model of solar hard X-ray bursts is discussed in which nonthermal electrons trapped in a magnetic bottle precipitate into the lower chromosphere through the resonant scattering by whistlers. In such a model, the X-ray spectra produced from trapped and precipitating electrons have different spectral shape, and both of the spectra will initially soften with time, provided the precipitation dominates over collisional degradation.     

Estimation of canopy drying time after rainfall using sap flow measurements in an emergent tree in a lowland mixed‐dipterocarp forest in Sarawak,Malaysia

This study emphasizes the importance of canopy drying time (CDT) after rainfall in a lowland tropical rain forest. In this study, we estimate CDT using sap flow velocities measured by a heat‐pulse method in an emergent tree in a lowland mixed‐dipterocarp forest. Estimated CDT (ECDT) for each rain event has been defined as the time from rainfall cessation to the specific time derived from the difference between diurnal courses of sap flow velocities on a rainy day versus bright days. ECDT could be derived for 22 rain events that were grouped into two types, depending on whether rainfall ceased before or after noon. The ECDTs were distributed more widely and with greater values when rainfall ceased before noon (Type 1) than after noon (Type 2). The ECDTs of both Type 1 and Type 2 decreased with increases in net radiation (Rn) and vapour pressure deficit (VPD) after rainfall. This result shows that ECDT is determined mainly by post‐rainfall evaporation rates. The sap flow velocity as a detector of canopy wetness worked out well because of the specific rainfall characteristics at this site. The practical limitations of the method using sap flow velocities are discussed in relation to rainfall characteristics and time lags between transpirations and sap flow velocities. Copyright © 2005 John Wiley & Sons, Ltd.     

A new interstellar polyatomic molecule: detection of propynal in the cold cloud TMC-1

We report the detection of the acetylene derivative propynal (HC triple bond CCHO) in the cold cloud TMC-1, with an abundance that is very close to that for the related species tricarbon monoxide (C3O). Propadienone, an isomer of propynal with the formula H2C=C=C=O, was not detected and is hence less abundant than either C3O or HC2CHO.     

Evaluation of sheet pile-ring countermeasure against liquefaction for oil tank site

The evaluation of a countermeasure against liquefaction which uses a sheet pilering for oil tank sites is presented. The simulation of earthquake responses observed at tank sites with and without sheet pile-ring is first performed to validate the three-dimensional finite element numerical model. Using the numerical model, liquefaction analysis is performed and the excess pore water pressure generated in the soil and the settlement of tank are investigated. The comparison of two- and three-dimensional models is also conducted to assess the applicability of two-dimensional analysis. The results show that the numerical model could simulate the observed earthquake responses of tank-ring-soil system, and that the excess pore water pressure and the settlement of the tank could be significantly reduced using a sheet pile-ring. The two-dimensional analysis proves to be capable of representing the main features of the dynamic response of the three-dimensional tank-ring-soil system.